Lenovo THINKSERVER TD230- Manuals

the server AC power cord from the wall outlet. Make sure the AC power cord is unplugged before youopen the chassis to add or remove the Remote Management Module. • Hazardous conditions, devices and cables: Hazardous electrical conditions may be present on power, telephone, and communication cables. ...

Chapter 2. Remote Management Module overview This section gives you an overview of the Remote Management Module and highlights significant benefits ofits features. The Remote Management Module is a 1.23-inch x 2.30-inch printed circuit board. When installed ontothe Remote Management Module connector...

Chapter 3. Configuring the remote management module This chapter describes how to use the Setup Utility program to configure the remote management modulefrom the un-configured status to the running status. It is recommended that you manually set a static IPaddress in the Setup Utility program. To se...

Chapter 4. Getting started with Remote Management Module The Remote Management Module features an embedded web server and applications offering a variety ofstandardized interfaces. This section describes both the interfaces and how to use them. The interfaces areaccessed using TCP/IP protocol. Befor...

After the initial log in, System Administrators may change passwords, create new users, and have full controlover access to the Remote Management Module. Navigation After successful login to the Remote Management Module module, the Remote Management Modulehome page is displayed. The top horizontal t...

Button Features LOGOUT Click this button to end the current Web Console session.Note that a remote console (KVM) window, if active, willbe closed when you log out. After logging out, the WebConsole will return to the Login screen. REFRESH Click this button to refresh the current web page, includinga...

Chapter 5. Remote Console (KVM) operation The Remote Console is the redirected screen, keyboard and mouse of the remote host system where theRemote Management Module is installed. To use the Remote Console window of your managed hostsystem, the browser must include a Java* Runtime Environment plug-i...

2. Once started, you will see two mouse cursors moving diagonally across the screen (starting at 0, 0 location). The local mouse cursor is displayed in RED color to differentiate between the two mousecursors. 3. Depending upon the difference in acceleration settings on both ends, mouse cursors may e...

The virtual devices act just like any other CDROM or floppy on the remote system. They can be read, written(assuming they are not read-only), and booted. The pair of virtual devices only appear on the remoteoperating system or BIOS setup menus when some media redirection is active. The virtual devic...

Chapter 6. Remote Management Module Web Console options This chapter gives you a detailed description of each Web Console page. It is organized in sectionscorresponding to the four tabs in the horizontal menu. Within each section, each menu choice from theleft-hand menu is illustrated and described ...

Option Task Description Sensor selection pull-down box Select the type of sensor readings to display in the list.The default is to see all sensors. Sensor Readings list Selected sensors shown with their name, status, andreadings. Show Thresholds button Click it to expand the list, showing low and hi...

Option Task Description LAN Channel number drop-down box It lists the LAN Channel(s) available for servermanagement. The LAN channels describe the physicalNIC connection on the server. Remote ManagementModule channel is the add-in Remote ManagementModule NIC. The Baseboard Mgmt channel (BMC LAN Chan...

Option Task Enable LDAP Authentication Check this box to enable LDAP authentication, then enterthe required information to access the LDAP server. Port Specify the LDAP Port. IP Address The IP address of LDAP server Notes: • IP Address made of 4 numbers should be separated by dots as in “xxx.xxx.xxx...

The Redirection Console handles mouse emulation from local window to remote screen in either of twomethods: • Absolute Mode : Select it to have the absolute position of the local mouse sent to the server. Use this mode for Windows operating systems. • Relative Mode : Select it to have the calculated...

Trademarks Lenovo, the Lenovo logo, and ThinkServer are trademarks of Lenovo in the United States, other countries, orboth. Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, othercountries, or both. Internet Explorer, Microsoft and Windows are trademar...