Lenovo T54H- Manuals

Page 2 - Adjusting the Monitor Position; Viewing Angle; Working Practices; Rest; Hands

3 DEUTS C H EN GLI S H F R ANÇAIS ES P A ÑOL IT ALIA NO JAP ANE SE COMP L & W A R R Adjusting the Monitor Position Viewing Angle You can tilt the screen backward and forward as shown below. Working Practices This section gives advice on how you can work comfortably and reduce fatigue. Rest Take ...

Page 3 - User controls

4 Eyesight Working with monitors, in common with any prolonged close work, can be visually demanding. Look away from the screen periodically and have your eyesight checked regularly. Screen settings Set the screen brightness and contrast to a comfortable level. You may have to adjust this as the lig...

Page 4 - Connecting your Monitor

5 DEUTS C H EN GLI S H F R ANÇAIS ES P A ÑOL IT ALIA NO JAP ANE SE COMP L & W A R R Connecting your Monitor Analog cable: Be sure to read the ‘Safety Information’ at the front of this User Guide before carrying out this procedure. 1. Turn off your PC and all attached devices. 2. Connect the sign...

Page 5 - Configuring your Monitor; Setup Diskette for Windows95 or Windows 98; • In case of Windows 95:

6 Configuring your Monitor Setup Diskette for Windows95 or Windows 98 This section must be completed before continuing with the Windows 95 or Windows 98 Auto Setup on Page 11. To use the Plug and Play feature in Windows 95 or Windows 98, files should be loaded from the IBM Flat Panel Monitor Install...

Page 6 - Switching on your Monitor; Configuring your; Setup Diskette for Windows 2000

7 DEUTS C H EN GLI S H F R ANÇAIS ES P A ÑOL IT ALIA NO JAP ANE SE COMP L & W A R R The AC adapter and signal cable are connected to your monitor. If you wish to change these or to fit a different stand, see Further Help on page 25. Switching on your Monitor 1. Switch on the power source and you...

Page 8 - Auto Setup; Auto Setup for DOS; NT

9 DEUTS C H EN GLI S H F R ANÇAIS ES P A ÑOL IT ALIA NO JAP ANE SE COMP L & W A R R Auto Setup Auto Setup Before carrying out this section, it is very important that The Setup Diskette for Windows 95 or Windows 98/Windows 2000/Windows NT has been run. (see page 6) The Setup Utility included on t...

Page 11 - Auto Setup for DOS on page 10.

12 9. When finished, the OSD main menu returns. Press the Exit button once to exit from the OSD. 10. Press the E SC key to return to Windows. You have completed the monitor setup for Windows. If you use other operat-ing systems, perform the appropriate A UTO S ETUP for those systems, also: see Auto ...

Page 12 - Manual Setup

13 DEUTS C H EN GLI S H F R ANÇAIS ES P A ÑOL IT ALIA NO JAP ANE SE COMP L & W A R R Manual Setup Normally, you can complete the setup procedure using A UTO S ETUP , however, if your screen image is still distorted after you perform A UTO S ETUP or the setup diskette does not run on your system,...

Page 13 - Adjusting Your LCD Monitor; User control features

14 Adjusting Your LCD Monitor User controls User control features Operation The image is already optimized for many display modes, however the user controls can be used to adjust the image to your liking. • Press any of the OSD control buttons to display the main OSD menu. • Use the Arrow buttons to...

Page 14 - turn amber to indicate that the new value has been saved.

15 DEUTS C H EN GLI S H F R ANÇAIS ES P A ÑOL IT ALIA NO JAP ANE SE COMP L & W A R R The settings are saved after adjustment and when exiting the OSD and will be effective thereafter. • Press the Exit button to move backwards through the sub-menus and exit from the OSD. Note: After making adjust...

Page 18 - Digi; appe

19 DEUTSCH ENGLISH FRANÇAIS ESPAÑOL ITALIANO JAPANESE COMPL & WARR T he LCD monitor needs time t o becom e therm ally stable t he first t im e you t u rn it on eac h day . Thus, t o achiev e m o re acc u rate adjustmen ts fo r param eters, allow the LCD m onitor t o warm up (be On) for at least ...

Page 20 - Further Information; Display modes; Factory Set Display Modes

21 DEUTS C H EN GLI S H F R ANÇAIS ES P A ÑOL IT ALIA NO JAP ANE SE COMP L & W A R R Further Information Display modes The display mode the monitor uses is controlled by the computer. Therefore, you should refer to your computer documentation for details on how to change display modes. The image...

Page 21 - Power Management; Product Disposal

22 Power Management If your computer has previously been used with a CRT monitor and is currently configured to a display mode outside the range that the Flat Panel monitor can display, you may need to re-attach the CRT monitor temporarily until you have re-configured the computer, preferably to 102...

Page 22 - Troubleshooting

23 DEUTS C H EN GLI S H F R ANÇAIS ES P A ÑOL IT ALIA NO JAP ANE SE COMP L & W A R R Troubleshooting If you have a problem setting up or using your monitor, you may be able to solve it yourself. Before calling your retailer or IBM, try the suggested actions that are appropriate to your problem. ...

Page 24 - Further Help; Removing the stand and cables

25 DEUTS C H EN GLI S H F R ANÇAIS ES P A ÑOL IT ALIA NO JAP ANE SE COMP L & W A R R Further Help If you are unable to correct the problem yourself, you may seek further help as follows: Call the IBM HELPCENTER. In the US call 1-800-772-2227 In Canada call 1-800-565-3344 In other countries conta...

Page 26 - “Removing the stand & cables section”

27 DEUTS C H EN GLI S H F R ANÇAIS ES P A ÑOL IT ALIA NO JAP ANE SE COMP L & W A R R To obtain the correct cables and/or to get further instructions on installing them, call the IBM HELPCENTER at the above numbers or contact your dealer, retailer, or other IBM authorized Servicer. Setting up &am...

Page 27 - Specifications

28 Specifications This color monitor (Type-model 9511-Axx) uses a 15-inch TFT LCD Dimensions Width:Depth:Height: 401 mm204 mm380 mm Weight Unpackaged:packaged: 11.8 lb. (5.35 Kg)16.1 lb (7.39 Kg) Tilt Forward Tilt:Backward tilt: – 4° + 40° Image Viewable Image Size:Maximum Height:Maximum Width:Pixel...

Page 28 - Worldwide Statement of Warranty

29 DEUTS C H EN GLI S H F R ANÇAIS ES P A ÑOL IT ALIA NO JAP ANE SE COMP L & W A R R :DUUDQW\ 6WDWHPHQWV Your Installation Diskette includes translation of IBM’s Statement of Warranty in following languages: Worldwide Statement of Warranty (Except Turkiye, U.S., Puerto Rico and Canada): Arabic Z...

Page 29 - Turkiye Statement of Warranty:

30 Spanish Z1255697.spa.html Swedish Z1255697.swe.html Taiwanese Z1255697.tai.html Turkiye Statement of Warranty: Turkish Z1255698.tur.html English Z1255698.eng.html U n it e d S ta te s , P u e r to R ic o a n d C a n d a d a S t a te m e n t o f L im it e d W a rr a n t y : English Z1254753.eng.ht...