Lenovo L2062- Manuals

© Copyright Lenovo 2011 . © Chapter 1. 1-1 Chapter 1. Getting started This User’s Guide contains detailed information o f your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following ...

Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Adjusting the tilt The illustration below shows the til t range of the monitor. For more information, see “Positioning your monitor” on page 2-1. Monitor contr...

To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. To optimize your monitor image, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not requi...

Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Arranging your work area Positioning your monitor Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort...

Quick tips for healthy work habits • Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents.Any concentrated and sustained visua...

Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Chapter 2. 2-3 Icon Control Description ...

Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.The image size, position and shape might change when the display mode changes. This is normal and the image c...

Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day...

Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor.• Use solvents or abrasives.• Use flammable cleaning materials to clean your monitor or any other electrical equipment. • Touch the screen...

Chapter 3. Reference information This section contains monitor specifications, troubleshooting information and instructions to manually install the monitor driver . Monitor specifications Table 3-1. Monitor specifications for type-model Dimensions Height Depth Width 362.5 mm ( 14.27 in) 174.8 mm ( 6...

Manual image setup If automatic image setup does not establish the image that you prefer, perform manual image setup. Note: Have your monitor powered on for about 15 minutes, until the monitor warms up. The power indicator is white , but there is no image The video signal cable is loose or disconnec...

    Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1600 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz. Manually installing the monitor driver Below are steps for manually installing the monitor dr...

Installing the monitor driver in Windows Vista To use the Plug and Play feature Microsoft Windows Vista, do the following: Note: You must download file from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista.1. Turn off the computer and all attached devices.2. Ensure that the mo...

Installing the monitor driver in Windows XP To use the Plug and Play feature in Windows XP, files should be loaded from the Reference and Driver CD . Note: This section must be completed before continuing with the Windows XP automatic image setup.1. Turn off the computer and all attached devices.2. ...

© Copyright Lenovo 2011 . © Chapter 1. 1-1 Chapter 1. Getting started This User’s Guide contains detailed information o f your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following ...

Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Adjusting the tilt The illustration below shows the til t range of the monitor. For more information, see “Positioning your monitor” on page 2-1. Monitor contr...

To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. To optimize your monitor image, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not requi...

Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Arranging your work area Positioning your monitor Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort...

Quick tips for healthy work habits • Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents.Any concentrated and sustained visua...

Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Chapter 2. 2-3 Icon Control Description ...

Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.The image size, position and shape might change when the display mode changes. This is normal and the image c...

Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day...

Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor.• Use solvents or abrasives.• Use flammable cleaning materials to clean your monitor or any other electrical equipment. • Touch the screen...

Chapter 3. Reference information This section contains monitor specifications, troubleshooting information and instructions to manually install the monitor driver . Monitor specifications Table 3-1. Monitor specifications for type-model Dimensions Height Depth Width 362.5 mm ( 14.27 in) 174.8 mm ( 6...

Manual image setup If automatic image setup does not establish the image that you prefer, perform manual image setup. Note: Have your monitor powered on for about 15 minutes, until the monitor warms up. The power indicator is white , but there is no image The video signal cable is loose or disconnec...

    Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1600 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz. Manually installing the monitor driver Below are steps for manually installing the monitor dr...

Installing the monitor driver in Windows Vista To use the Plug and Play feature Microsoft Windows Vista, do the following: Note: You must download file from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista.1. Turn off the computer and all attached devices.2. Ensure that the mo...

Installing the monitor driver in Windows XP To use the Plug and Play feature in Windows XP, files should be loaded from the Reference and Driver CD . Note: This section must be completed before continuing with the Windows XP automatic image setup.1. Turn off the computer and all attached devices.2. ...