Lenovo 4432-HF1 - Manuals

© Copyright Lenovo 2008. © 1-1 Chapter 1. Getting started This User ’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: •...

1-2 Product overview This section will provide information on adjusting monitor positions, setting user controls. Adjusting the tilt The illustration below shows the tile range of the monitor. For more information, see see “Positioning your monitor” on page 2-1. Monitor controls Your monitor has con...

Chapter 1. 1-3 Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the Monitor Safety, Troubleshooting, and Warranty Guide before carrying out this procedure. 1. Power ...

1-4 Connect the digital cable to the DVI connector of the monitor and the other end on the back of the computer. Note: The digital cable is not included with the monitor. Insert the power cord into the monitor ,then plug the monitor power cord and the computer cord into grounded electrical outlets. ...

Chapter 1. 1-5 To install the monitor driver, insert the Reference and Driver CD , click Install driver, and follow the on-screen instructions. To optimize your monitor image, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. T...

© Copyright Lenovo 2008. © 2-1 Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your work...

2-2 • Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents.Any concentrated and sustained visual activity can be tiring for yo...

Chapter 2. 2-3 Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description ...

2-4 Using the On-Screen Display (OSD) controls To adiust the settings, the user controls can be viewed through the OSD. To use the controls: Press to open the main OSD menu. 2. Use or to move among the icons. Select an icon and press to access that function. If there is a sub-menu, you can move betw...

2-6 Input video signal This monitor can accept video signals through two different connectors. Most desktop computers use a D-SUB connector. Select digital among OSD Controls when you use DVI connector. - Selects D-SUB (Analog)- Selects DVI-Digital Same as Analog NOVO VISION Optimize screen for spec...

Chapter 2. 2-7 Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.The image size, position and shape might change when the display mode changes. This is normal ...

2-8 Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working...

Chapter 2. 2-9 Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not:• Apply water or liquid directly to your monitor.• Use solvents or abrasives.• Use flammable cleaning materials to clean your monitor or any other electrical equipment. • To...

© Copyright Lenovo 2008. © 3-1 Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model 4432-HF1 Di...

Chapter 3. 3-3 Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem Possible cause Suggested action Refe...

3-4 Manual image setup If automatic image setup does not establish the image that you prefer, perform manual image setup.Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.1. Press at the bottom of the monitor to open the OSD menu. 2. Use or to select and press to ac...

Chapter 3. 3-5 Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft ® Windows XP ® Microsoft Windows Vista. Please see the Install Driver section of the Reference and Driver CD for automatic installation. Installing the monitor driver in Wind...

3-6 Installing the monitor driver in Windows XP To use the Plug and Play feature in Windows XP, files should be loaded from the Reference and Driver CD . Note: This section must be completed before continuing with the Windows XP automatic image setup.1. Turn off the computer and all attached devices...

© Copyright Lenovo 2008. © A-1 Appendix A. Service and Support Telephone technical support Country or Region Telephone Number China 800-810- 8 8 8 8, (010)82879425

© Copyright Lenovo 2008. © B-1 Appendix B. Notices Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intel...