Lenovo 2572MB1 - Manuals

Chapter 1. 1-1 Chapter 1. Getting started This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview , please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: • Setup Poster • ...

Chapter 1. 1-2 Product overview This section will provide information on adjusting monitor positions , setting user controls , and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Swivel With the built-in pedestal, you can tilt ...

Chapter 1. 1-4 Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position).

Chapter 1. 1-5 Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information located on page iii before carrying out this procedure . 1. Power off your computer and all attached devices , a...

Chapter 1. 1-9 11. To optimize your monitor image , press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not required for normal operation. Note: If automatic image setup does not establish the image that you prefer, perfo...

Chapter 2. 2-1 Chapter 2. Adjusting and using your monitor This section will give you information on adjusting and using your monitor. Comfort and accessibility Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the eq...

Chapter 2. 2-2 • Use the monitor brightness, contrast controls, if equipped to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents.Any concentrated and sustained visual activity can be tiring for your eyes. Be ...

Chapter 2. 2-3 Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description ...

Chapter 2. 2-7 Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal...

Chapter 2. 2-8 Image rotation Before rotating the monitor, you should set-up your computer to rotate the image.Rotating the image may require special rotation software or you may find that yourcomputer is preloaded with video graphic drivers that allows image rotation. Checkthe Graphic Properties se...

Chapter 2. 2-9 Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of e...

Chapter 2. 2-10 Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor.• Use solvents or abrasives.• Use flammable cleaning materials to clean your monitor or any other electrical equipment. • ...

Chapter 2. 2-11 Step 3: Remove the base from the monitor, refer to "Detaching the monitor base and stand". Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), VESA Mounting Screw M4 x 10 mm. Step 5: Attach the LCD display to the wall, follo...

Chapter 3. 3-1 Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model LT2252pwA Dimensions Depth ...

Chapter 3. 3-4 Manual image setup If automatic image setup does not establish the image that you prefer, perform manual image setup. Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.1. Press at the bottom of the monitor to open the OSD menu. 2. Use or to select and...

Chapter 3. 3-5 Manually installing the monitor driver Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft Windows Vista, Microsoft Windows 8 . Installing the monitor driver in Windows 7 To use the Plug and Play feature in Microsoft Windows 7, do the following...

Chapter 3. 3-6 Installing the monitor driver in Windows Vista To use the Plug and Play feature in Microsoft Windows Vista, do the following: Note: You must download file from the Reference and Driver CD to use the Plug and Play feature in Windows Vista.1. Turn off the computer and all attached devic...

Chapter 3. 3-7 Installing the monitor driver in Windows 8 To use the Plug and Play feature in Microsoft Windows 8, do the following: Note: You must download file from the Reference and Driver CD to use the Plug and Play feature in Windows 8.1. Turn off the computer, all attached devices.2. Ensure th...

Appendix A. A-1 Appendix A. Service and Support The following information describes the technical support that is available for your product, during the warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full explanation of Lenovo warranty terms. Regis...