Lenovo 14- Manuals

Read this first Be sure to follow the important tips given here to get the most use and enjoyment out of your computer.Failure to do so might lead to discomfort or injury, or cause your computer to fail. Protect yourself from the heat that your computer generates. When your computer is turned on or ...

Protect your computer and data when moving it. Before moving a computer equipped with an internal storage drive, do oneof the following: • Turn it off. • Put it in sleep mode. • Put it in hibernation mode. This will help to prevent damage to the computer, and possible loss of data. Handle your compu...

Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enoughthat the product should not be used again until it has been inspected and, if necessary, repaired byan authorized servicer. As with any electronic device, pay close att...

Although there are no moving parts in your computer after the power cord has been disconnected, thefollowing warnings are required for your safety. CAUTION:Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Before replacing any CRUs, turn off the computer and wait three to five...

Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you useare rated to handle the electrical requirements of the product. Never overload these devices. If power stripsare used, the load should not exceed the power ...

External devices CAUTION:Do not connect or disconnect any external device cables other than USB cable while the computerpower is on; otherwise, you might damage your computer. To avoid possible damage to attacheddevices, wait at least five seconds after the computer is shut down to disconnect extern...

• Do not operate your computer inside furniture, as this might increase the risk of overheating. • Airflow temperatures into the computer should not exceed 35°C (95°F). Electrical current safety information DANGER Electric current from power, telephone, and communication cables is hazardous. To avoi...

Liquid crystal display (LCD) notice CAUTION:The liquid crystal display (LCD) is made of glass, and rough handling or dropping the computer cancause the LCD to break. If the LCD breaks and the internal fluid gets into your eyes or on yourhands, immediately wash the affected areas with water for at le...

Chapter 1. Product overview This chapter provides information about the locations of connectors, locations of important product labels,computer features, specifications, operating environment, and preinstalled programs. This chapter contains the following topics: • “Locating computer controls, conne...

Right-side view Note: Depending on the model, your computer might look different from the following illustration. Figure 2. Right-side view 1 Power button 2 Volume-control buttons 3 Screen-rotation-lock button 4 USB 3.0 connectors 5 High-Definition Multimedia Interface (HDMI ™ ) connector 1 Power bu...

2 Volume-control buttons The volume-control buttons enable you to adjust the volume while you are using your computer in thetablet mode. 3 Screen-rotation-lock button Use the screen-rotation-lock button to lock the screen-rotation function. 4 USB 3.0 connectors The Universal Serial Bus (USB) 3.0 con...

Bottom view Note: Depending on the model, your computer might look different from the following illustration. Figure 4. Bottom view 1 Emergency-reset hole 2 Speakers 1 Emergency-reset hole If the computer stops responding and you cannot turn it off by pressing the power button, remove the acpower ad...

Notes: • To ensure proper airflow, do not place any obstacles in front of the fan louvers. • The fan louvers of your computer might get too hot when the computer is running heavy tasks. When you are using or carrying the computer, take care to avoid direct contact to the fan louvers. Status indicato...

4 Camera-status indicator When the camera-status indicator is on, the camera is in use. 5 6 System-status indicators There are two ThinkPad logos on your computer, one on the palm rest and the other on the outer lid.The illuminated dot in each ThinkPad logo works as a system-status indicator and hel...

computer hardware. If your computer model is licensed to use the Windows 8.1 Pro operating system, thatlicense contains downgrade rights which permit you to use the Windows 7 Professional operating system inplace of the Windows 8.1 Pro operating system if you prefer. For more information about the G...

• Color display with the thin-film transistor (TFT) technology • Brightness control • Camera • Microphones Keyboard • Function keys • Keyboard frame travel function • 6-row backlight keyboard • ThinkPad pointing device Interface • ac power connector • Always On USB 2.0 connector • Audio connector • ...

Power source (ac power adapter) • Sine-wave input at 50-60 Hz • Input rating of the ac power adapter: 100-240 V ac, 50-60 Hz Operating environment This section provides information about your computer operating environment. Environment: • Maximum altitude without pressurization: 3048 m (10 000 ft) •...

Note: If you do not find the program you need, open the Lenovo ThinkVantage ® Tools program to find the dimmed icon for the program. Then double-click the icon to install the program. To access Lenovo programs through Windows Search, do the following: 1. Click the Start button and then type the prog...

Note: If you do not find the program you need, go to Lenovo PC Experience ➙ Lenovo Tools . Then you can find the program you need. Depending on the model, your computer might support the following Lenovo programs: Note: The available programs are subject to change without notice. • Active Protection...

Chapter 2. Using your computer This chapter provides information on using some of the computer components. This chapter contains the following topics: • “Registering your computer” on page 17 • “Frequently asked questions” on page 17 • “Using the tablet buttons” on page 20 • “Using the multi-touch s...

Using the special buttons This topic provides instructions on how to use the special buttons. The computer is equipped with special buttons as shown in the following illustration. You can control somefunctions of your computer through the special buttons, without the use of the keyboard. 1 Power but...

Touch gesture (touch modelsonly) Description Touch : Swipe in from the top or bottom edge of an open app. Mouse action : Right-click anywhere on an open app. Function : View the app commands on an open app, such as Copy , Save , and Delete , depending on the app. Supported operating system : Windows...

• To purchase the ThinkPad Active Pen, go to the Lenovo Support Web site: http://www.lenovo.com/accessories Using the ThinkPad Active Pen The ThinkPad Active Capacitive Pen is battery-powered and used with one AAAA alkaline battery. To install a battery into the ThinkPad Active Pen, unscrew and remo...

Operating modes This section provides information about the operating modes of your computer. Your computer providesthe notebook mode, stand mode, tablet mode, and tent mode that enable you to work more convenientlyin your working environment. This section contains the following topics: • “Rotating ...

Attention: Do not rotate the computer display with too much force, otherwise the computer display or hinges might get damaged. Do not apply too much force to the upper-right or upper-left corner ofthe computer display. Note: Depending on the model, your computer might look different from the followi...

In the notebook mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick areautomatically enabled. By default, the autorotate feature is enabled. To avoid undesired screen rotation, press thescreen-rotation-lock button to disable the autorotate feature. For instructions on how to...

2. Position your computer as shown. Your computer is now in the stand mode. In the stand mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automaticallydisabled. By default, the autorotate feature is enabled. To avoid undesired screen rotation, press thescreen-rotation...

In the tablet mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automaticallydisabled. However, you can control some functions of your computer through the special buttons and themulti-touch screen, without the use of the keyboard and the touch pad. For more informatio...

If your computer is in the tablet mode, do the following to turn the computer from the tablet mode into thetent mode: Note: Depending on the model, your computer might look different from the illustrations in this topic. 1. Slowly rotate your computer display anticlockwise to any angle within a rang...

• In the notebook mode, the keyboard, the ThinkPad trackpad, and the TrackPoint pointing stick are automatically enabled. In the stand mode, tablet mode, and tent mode, the keyboard, the ThinkPadtrackpad, and the TrackPoint pointing stick are automatically disabled. The following illustration shows ...

Customizing the keyboard You can customize the keyboard to achieve the extended functions of the keyboard. To customize the keyboard, do the following: 1. Go to Control Panel. 2. Click Hardware and Sound ➙ Device Manager ➙ Keyboards ➙ Standard PS/2 keyboard and then follow the instructions on the sc...

1 Function keys • + : Press Fn+Esc to disable or enable the Fn Lock function. When the Fn Lock function is disabled : The Fn Lock indicator is off (default mode). To initiate the special function printed as an icon on each key, press the function key directly. To input F1-F12, pressthe Fn key and th...

• : Enables or disables the wireless networking features. For more information on the wireless features, refer to “Wireless connections” on page 47. • + : Controls the keyboard backlight • : For Windows 7: Opens Control Panel . For Windows 8.1: Opens the Settings charm. • : For Windows 7: Opens Wind...

• “ThinkPad pointing device without TrackPoint buttons” on page 40 ThinkPad pointing device with TrackPoint buttons This type of ThinkPad pointing device consists of the following components: 1 TrackPoint pointing device 2 Trackpad By default, both the TrackPoint pointing device and the trackpad are...

ThinkPad pointing device without TrackPoint buttons This type of ThinkPad pointing device consists of the following components: 1 Pointing stick 2 Trackpad Depending on your preference, you can use the pointing device in one of the following modes: • TrackPoint mode • Trackpad mode • Classic TrackPo...

1 Point Use the pointing stick to move the pointer on the screen.To use the pointing stick, apply pressure to the pointingstick nonslip cap in any direction parallel to the keyboard.The pointer moves accordingly but the pointing stick itselfdoes not move. The speed at which the pointer movesdepends ...

1 Point Use the pointing stick to move the pointer. To use thepointing stick, apply pressure to the nonslip cap on thepointing stick in any direction parallel to the keyboard.The pointer moves accordingly but the pointing stick itselfdoes not move. The speed at which the pointer movesdepends on the ...

Three-finger swipe Put three fingers on the trackpadand move them left to show thenext item. Move them right toshow the previous item. Four-finger swipe Put four fingers on the trackpadand move them upward to view andchoose from opened apps. Four-finger swipe Put four fingers on the trackpadand move...

Power management When you use your computer away from electrical outlets, you depend on battery power to keep yourcomputer running. Different computer components consume power at different rates. The more you use thepower-intensive components, the faster you consume battery power. Spend more time un...

3. For Low battery alarm or Critically low battery alarm , set the percentage of the power level and set the action. Note: If your computer enters sleep or hibernation mode when the battery is low, but the alarm message has not yet been displayed, the message will be displayed when the computer resu...

• If there are restrictions on the use of computer wireless features on an airplane, you need to disable the wireless features of your computer before boarding. Depending on the wireless devices installed on your computer, you might be able to use the followingwireless networks: • Wireless LAN conne...

Checking the wireless-LAN connection status You can check the wireless-LAN connection status through the wireless-network-connection-status icon inthe Windows notification area. The more bars encompassed, the better the signal is. For the Windows 7 operating system, you also can check the Access Con...

Note: The combo audio connector does not support a conventional microphone. The following table shows which functions of the audio devices attached to the connectors on your computeror the supported ThinkPad OneLink Dock are supported. Table 3. Audio feature list Connector Headset with a 3.5 mm(0.14...

Chapter 3. Enhancing your computer This chapter provides instructions on how to use hardware devices to expand your computer capabilities. • “Finding ThinkPad options” on page 55 • “ThinkPad OneLink Dock” on page 55 • “ThinkPad OneLink Pro Dock” on page 56 Finding ThinkPad options If you want to exp...

2 USB 3.0 connector : Used to connect devices that are compatible with USB 3.0 and USB 2.0. 3 Always On USB connector : By default, the Always On USB connector enables you to charge some mobile digital devices and smartphones no matter when your computer is in sleep mode, hibernation mode,or is off....

Chapter 4. You and your computer This chapter provides information about accessibility, comfort, and traveling with your computer. • “Accessibility and comfort” on page 59 • “Traveling with your computer” on page 64 Accessibility and comfort Good ergonomic practice is important to get the most from ...

Display : Position the display to maintain a comfortable viewing distance of 510-760 mm (20-30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep thedisplay screen clean and set the brightness to levels that enable you to see the screen clearl...

– Zoom in: Move two fingers farther apart on the touch screen to enlarge the size of text, pictures, maps, or other objects. – Zoom out: Move two fingers closer together on the touch screen to reduce the size of text, pictures, maps, or other objects. Screen resolution You can make your documents ea...

For more information about how to use and configure On-Screen Keyboard, see the Windows Help andSupport information system. Personalized keyboard The tactile bumps on the keyboard provide a reference point from which you can easily locate all keys onthe keyboard without visual assistance. To adjust ...

• If you carry an ac power adapter, detach the ac cord from it to avoid damaging the cord. Travel tips on airplanes If you carry your computer into an airplane, take note of the following tips: • If you intend to use your computer or wireless services (such as Internet and Bluetooth), check with the...

Chapter 5. Security This chapter provides information about how to protect your computer from theft and unauthorized use. • “Using passwords” on page 67 • “Hard disk security” on page 71 • “Setting the security chip” on page 72 • “Using the fingerprint reader” on page 73 • “Notice on deleting data f...

4. Depending on your need, do one of the following: • To set a password, do the following: a. In the Enter New Password field, type a desired password and press Enter. b. In the Confirm New Password field, retype the password and press Enter. • To change a password, do the following: a. In the Enter...

– Internal Network Option ROM – Security mode Notes: • The system administrator can set the same supervisor password on many ThinkPad notebook computers to make administration easier. • When Lock UEFI BIOS Settings option is enabled, all BIOS settings cannot be changed. To change the settings, a sup...

Note: The hard disk password cannot be removed in User HDP mode. – If you select Master HDP mode, follow the following steps to change the master hard disk password: 1. Type the current master hard disk password in the Enter Current Password field and press Enter. 2. Type the new master hard disk pa...

Professional and Enterprise editions of the Windows 8.1 operating system. Refer to “Using WindowsBitLocker Drive Encryption” on page 72. • Before you dispose of, sell, or hand over your computer, be sure to delete data stored on it. For more information, refer to “Notice on deleting data from your s...

To set an item on the Security Chip submenu, do the following: 1. Turn off your computer. Wait for about five seconds, and then turn on the computer again. 2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program. 3. Select Security ➙ Security Chip by using the directional ...

2. Follow the on-screen instructions to complete several scans until the enrollment is completed. Maintaining the fingerprint reader The following actions could damage the fingerprint reader or cause it not to work properly: • Scratching the surface of the reader with a hard, pointed object. • Scrap...

Notice on deleting data from your storage drive Some of the data stored on storage drive might be sensitive. Handing your computer over to someone elsewithout deleting the installed software, such as operating systems and application software, might evenviolate license agreements. Be sure to delete ...

Chapter 6. Advanced configuration While it is important to protect files, data, and settings that are on the storage drive, you also might needto install a new operating system, install new device drivers, update your system UEFI BIOS, or recoverpreinstalled software. This information will help you ...

8. Install the Windows 7 fix modules. You can find the Windows 7 fix modules in the C:\SWTOOLS\OSFIXES\ directory. For more information, go to the Microsoft Knowledge Base home page at:http://support.microsoft.com/ 9. Install the registry patches, for example the Enabling Wake on LAN from Standby fo...

8. Install the device drivers. See “Installing device drivers” on page 79. Note: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in the ThinkPad Setup program. Otherwise, the operating system will not start correctly. When you install the Windows 8.1 operati...

Table 4. Config menu items (continued) Menu item Submenu item Selection Comments CPU Power Management • Enabled • Disabled Enable or disable thepower-saving feature thatstops the microprocessor clockautomatically when there are nocomputer activities. Normally, itis not necessary to change thesetting...

Startup menu To change the startup settings of your computer, select the Startup tab from the ThinkPad Setup menu. Attention: • After you change the startup sequence, ensure that you select a correct device during a copy, a save, or a format operation. Otherwise your data might be erased or overwrit...

Table 6. Startup menu items (continued) Menu item Selection Comments Boot Mode • Quick • Diagnostics Quick : The diagnostic splash screen will not be displayed unless you press Escduring starting the system. Diagnostics : The diagnostic splash screen is always displayed duringstarting the system. Op...

Chapter 7. Preventing problems An important part of owning a ThinkPad notebook computer is maintenance. With proper care, you canavoid common problems. The chapter provides information that can help you keep your computer runningsmoothly. • “General tips for preventing problems” on page 93 • “Making...

– Access ThinkPad Setup and load the default settings. – Restart the computer and start the recovery operation. – If your computer uses discs as the recovery media, do not remove the disc from the drive until prompted to do so. • For suspected hard disk drive or hybrid drive issues, refer to “Diagno...

scheduled updates to search by severity (critical updates, critical and recommended updates, or all updates)so the list you choose from contains only those update types that are of interest to you. For more information about how to use the System Update program, refer to the help information systemo...

• Store your external and removable hard disk drives or optical drives in appropriate containers or packaging when they are not being used. • Before you install a memory card such as an SD card, SDHC card, SDXC card, and a MultiMediaCard, touch a metal table or a grounded metal object. This action r...

Cleaning your computer display To clean the computer display, do the following: 1. Gently wipe the display with a dry, soft lint-free cloth. If you see a scratchlike mark on your display, it might be a stain transferred from the keyboard or the TrackPoint pointing stick when the cover waspressed fro...

Chapter 8. Troubleshooting computer problems This chapter provides information on what to do if you experience a problem with your computer. This chapter contains the following topics: • “Diagnosing problems” on page 99 • “Troubleshooting” on page 99 Diagnosing problems If you experience problems wi...

Note: If you cannot turn off your computer, or if you cannot restart it, continue with step 2. 2. Remove the ac power adapter from the computer, and reset the system by inserting a straightened paper clip into the emergency-reset hole. To locate the reset hole, refer to “Bottom view” on page 6.Reatt...

Solution : Machine UUID is invalid. Have the computer serviced. • Message : Fan error Solution : Cooling fan has failed. Have the computer serviced. • Message : Thermal sensing error Solution : The thermal sensor is not functioning correctly. Shut down the computer immediately and have the computer ...

The network cable must be securely connected to the RJ45 connector of the supported dock. Themaximum allowable distance from the computer to the hub is 100 meters (328 feet). If the cable isconnected and the distance is within the limit but the problem persists, try a different cable. – You are usin...

Note: If you are using the Windows 7 operating system, click Show hidden icons on the windows notification area. The Access Connections icon is displayed. For more information about the icon, refer to the AccessConnections help information system. For the Windows 7 operating system, check the Networ...

3. Turn on the computer and try using the keyboard again. If the keyboard problem is resolved, carefully reconnect the external numeric keypad and the externalkeyboard. Ensure that you have seated the connectors correctly. If the problem persists, ensure that the correct device driver is installed b...

Solution : If you have modified a partition on your hard disk drive or hybrid drive by using partition software, information about that partition, or the master boot record might have been destroyed. 1. Turn off the computer, and then turn it on again. 2. If you still see only the pointer on the scr...

• Problem : Wrong characters are displayed on the screen. Solution : Did you follow the correct procedure when installing the operating system or application program? If you did, have the external monitor serviced. • Problem : The Extend desktop function does not work. Solution : Enable the Extend d...

3. Look at the tabs of playback devices. If you have attached a headphone, the headphone will be automatically set as the default device, and the headphone tab icon will be checked. 4. To set a different device as the default, click the speaker tab. Click the Set Default Device drop down list box. S...

• Problem : The computer enters sleep mode (the sleep indicator turns on) immediately after the power-on self-test. Solution : Ensure that: – The battery is charged. – The operating temperature is within the acceptable range. Refer to “Operating environment” on page 12. If the battery is charged and...

hard disk drive or hybrid drive problems • Problem : The hard disk drive or hybrid drive makes a rattling noise intermittently. Solution : The rattling noise might be heard: – When the hard disk drive or hybrid drive begins or finishes getting access to data. – When you carry the hard disk drive or ...

A USB problem Problem : A device connected to the USB connector does not work. Solution : Open the Device Manager window. Ensure that the USB device setup is correct, and that the assignment of computer resource and the installation of the device driver are correct. To open the DeviceManager window,...

Chapter 9. Recovery overview This chapter provides information about the recovery solutions provided by Lenovo. • “Recovery overview for the Windows 7 operating system” on page 115 • “Recovery overview for the Windows 8.1 operating system” on page 120 Recovery overview for the Windows 7 operating sy...

To create recovery media, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Factory Recovery Disks . Then, follow the instructions on the screen. Using recovery media This section provides instructions on how to use recovery media on different operating systems. • You can use recovery media t...

Performing a recovery operation This section provides instructions on how to perform a recovery operation using the Rescue and Recoveryprogram. 1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Enhanced Backup and Restore . The Rescue and Recovery program opens. 2...

Note: If the Rescue and Recovery workspace fails to open, see “Solving recovery problems” on page 120. 4. Do one of the following: • To rescue files from your hard disk drive, your hybrid drive or a backup, click Rescue files and follow the instructions on the screen. • To restore your hard disk dri...

• If you have created a rescue medium using a USB optical drive or a USB hard disk drive, use the following instructions to use the rescue medium: 1. Turn on your computer. When the ThinkPad logo is displayed, press F1. The ThinkPad Setup program starts. 2. Choose the Config menu and change the USB ...

Chapter 10. Replacing devices This chapter provides instructions on how to install or replace hardware for your computer. • “Static electricity prevention” on page 123 • “Disabling the built-in battery” on page 123 • “Replacing the keyboard” on page 124 • “Replacing the base cover assembly” on page ...

5. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off automatically. Wait three to five minutes to let the computer cool. Replacing the keyboard Before you start, print these instructions. Read the important safety information first. See “Importa...

6. Pivot the keyboard slightly upward as shown by the arrow 1 . Then turn over the keyboard as shown by the arrow 2 . 7. Detach the connectors and remove the keyboard. Installing the new keyboard To install the new keyboard, do the following: Chapter 10 . Replacing devices 125

3. Slide the keyboard in the direction shown by the arrows until the latches of the keyboard are hidden under the keyboard bezel 4. Turn the computer over and reinstall the screws. 5. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the base cover ...

7. Tighten the screws to secure the base cover assembly. 8. Resinstall the rest of the screws 1 and the screw caps 2 . 9. Turn the computer over again. Connect the ac power adapter and all cables. Replacing the memory module Before you start, print these instructions. Read the important safety infor...

Replacing the memory module To replace the memory module, do the following: 1. Disable the built-in battery. See “Disabling the built-in battery” on page 123. 2. Close the computer display, and turn the computer over. 3. Remove the base cover assembly. See “Replacing the base cover assembly” on page...

9. Attach the connector. 10. Reinstall the base cover assembly. 11. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the button I/O card Before you start, print these instructions. Read the important safety information first. See “Importantsafety i...

10. Reinstall the screws to secure the audio/OneLink/ac power/USB card. 11. Reconnect all the cables. 12. Reinstall the base cover assembly. 13. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the speaker assembly Before you start, print these ins...

6. Install the new speaker assembly in place. Then install the screws to secure the speaker assembly. 7. Reattach the connector. 8. Reinstall the base cover assembly. 9. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing the coin-cell battery Before ...

Chapter 11. Getting support This chapter provides information about getting help and support from Lenovo. • “Before you contact Lenovo” on page 145 • “Getting help and service” on page 145 • “Purchasing additional services” on page 147 Before you contact Lenovo Often, you can solve your computer pro...

The following items are not covered:• Replacement or use of parts not manufactured for or by Lenovo or non-warranted parts Note: All warranted parts contain a 7-character identification in the format FRU XXXXXXX or a 10-character identification in the format FRU XXXXXXXXXX. • Identification of softw...

Appendix A. Regulatory information Wireless related information Wireless interoperability The wireless LAN card is designed to be interoperable with any wireless LAN product that is based on DSSS,CCK, and/or OFDM radio technology, and is compliant to: • The 802.11b/g Standard, 802.11a/b/g or 802.11n...

• Find Me Profile • Immediate Alert Profile • Battery Status Profile Usage environment and your health Integrated wireless cards emit radio frequency electromagnetic energy like other radio devices. However, thelevel of energy emitted is far much less than the electromagnetic energy emitted by wirel...

Locating wireless regulatory notices For more information about the wireless regulatory notices, refer to the Regulatory Notice shipped with your computer. If your computer is shipped without the Regulatory Notice , you can find it on the Web site at: http://www.lenovo.com/UserManuals Certification ...

Responsible Party:Lenovo (United States) Incorporated1009 Think Place - Building OneMorrisville, NC 27560Phone Number: 919-294-5900 Industry Canada Class B emission compliance statement CAN ICES-3(B)/NMB-3(B) European Union - Compliance to the Electromagnetic CompatibilityDirective This product is i...

Appendix B. WEEE and recycling statements Lenovo encourages owners of information technology equipment to responsibly recycle their equipmentwhen it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners inrecycling their IT products. Information on product ...

Disposing of Lenovo computer components Some Lenovo computer products sold in Japan may have components that contain heavy metals or otherenvironmental sensitive substances. To properly dispose of disused components, such as a printed circuitboard or drive, use the methods described above for collec...

Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/ECconcerning batteries and accumulators and waste batteries and accumulators. The Directive determines theframework for the retur...

Appendix C. Restriction of Hazardous Substances Directive(RoHS) European Union RoHS Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronicequipment ...

Appendix D. ENERGY STAR model information ENERGY STAR ® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products andpractices. Lenovo is proud to offer our customers product...

Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: LenovoAccess ConnectionsActive Protection SystemRescue and RecoverySecure Data DisposalThinkPadThinkPad logoThinkVantageTrackPointUltraConnectYoga Intel, Intel SpeedStep, and Intel vPro are tradem...