Lenco MES-402 - Manuals

OPERATIONS PREPARATION Power on the TV set and select video input mode.Power on the audio system which is connected to the player. 1. Slide POWER ON/OFF switch to turn on the player.2. open the disc tray manually.3. Place a disc onto the disc tray.4. Close the disc tray by hand and the playback star...

5 3. The files in this folder are displayed and select your favourable track via navigation buttons and press ok buttonto start playback. Press NEXT and PREV button to select track directly.Press REPEAT button change play mode. Load a Kodak picture CD/JPEG CD disc onto the disc tray,then select pict...

6 TROUBLESHOOTING If your DVD player does not seem to be functioning properly, check the items below before you contact an authorized service center. Check Make sure the adapter is securely plugged in. Turn the power off and then back on. Check that the battery is inserted in the "+" and ...

SPECIFICATIONS Power source: AC 100-240V~60/50HzPower consumption: 10W (Main unit) 18W (Main unit & Slave screen) TV systems supported: PAL/NTSCOperating Temperature Range: +5 C to +35 CDimensions: 232(L)x180(W)x38(H)mm Discs supported:1. DVD-VIDEO disc 12 cm single-sided, single-layer12 cm sing...

5 8 Installation of the portable DVD player in a vehicle 1. First, take the Slave screen and place it with the rear facing towards you.2. Thread one Headrest Strap to the back of the Slave screen as shown.3. Wrap the strap around the head rest on the front seat.4. Make sure that the Slave screen is ...