Lenco DVT-1542 - Manuals - manualsarea.com

Page 2 - Table of content

2 Table of content What’s in the box? .................................................................................................... 3 Safety Precautions ................................................................................................... 4 IMPORTANT SAFETY INSTRUCTIONS - READ C...

Page 4 - Safety Precautions; IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE.; CAUTION

4 Safety Precautions IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE. CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER SCREWS. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REQUEST A QUALIFIED SERVICE PERSON TO PERFORM SERVICING. This...

Page 6 - Declaration of Conformity

6 Safety instructions – continued Scratched discs If your disc is badly scratched, it will not play. You may be able to repair the disc if you use a disc polisher. Cleaning the Lens If the lens becomes dirty, it may cause a skipping of sound during DVD / CD operation. Clean the lens with a commercia...

Page 7 - Functional parts; Top View of the TV

7 Functional parts Top View of the TV Front View of the TV 1. V- Button 2. V+ Button 3. CH- Button 4. CH+ Button 5. MENU Button 6. SOURCE Button 7. Standby Button 8. Open/Close 9. Play/Pause 10. Remote sensor 11. Power indicator To turn the TV power ON Put the TV set on the correct place, then conne...

Page 8 - Rear view of the TV

8 instruction. If you are not going to use this TV set for a long time, switch off the set and disconnect the power plug from the wall outlet. Rear view of the TV NOTE: When using external equipment with this TV set, please read the instruction manual of the external equipment. Switch off all power ...

Page 9 - Remote control unit

9 Remote control unit STANDBY: Switch on TV when at standby mode. AUTO: Press to do auto configuration directly in PC source. MUTE: Press to mute the sound. Press again or press VOL+ to u nmute. 0-9: Press 0-9 to select a TV channel directly when you are watching TV. To enter page number in teletext...

Page 11 - TV Mode; CHANNEL menu; ] to select a language and

11 TV Mode CHANNEL menu Press [MENU] to display the main menu. Press [ ◄ / ► ] to select "CHANNEL" in the main menu, then press [ ▼ ] to select and [OK] to enter. Auto Tuning: Press [ ▼ ] and [OK] to enter AUTO Tuning and press [ ▲ / ► / ▼ / ◄ ] to select a language and press [OK] to start. ...

Page 12 - Picture menu; change the noise reduction in sequence: Off — Low — Middle — High.; Sound menu; ] button to select Surround Sound, then press button to

12 Signal Information (For DTV only): Press [ ▼ ] and [OK] to enter "Signal Information" submenu. This menu displays signal details, including Channel, Network,Modulation, Quality and Strength. Picture menu Press [MENU] to display the main menu. Press [ ◄ / ► ] to select "PICTURE" in...

Page 13 - Time menu; ] to set the proper time zone according to your; Lock menu; ] to select “OPTION” in the main

13 Time menu Press [MENU] to display the main menu. Press [ ◄ / ► ] to select "TIME" in the main menu, then press [ ▼ ] and [OK] to enter. Clock (For DTV only): Display the current system time. It’s not available. Time Zone (For DTV only): Press [ ► ] or [OK] to enter "Time Zone" sub...

Page 14 - USB Operation

14 language. Hearing Impaired (For DTV only): Press [ ► ] or [OK] to set the hearing impaired to "On" or "Off". Restore Factory Default: Press [ ▲ / ▼ ] button to select Restore Factory Default, then press [OK] button to enter a dialogue.Press [ ◄ ] button selecting Yes to restore fa...

Page 15 - buttons to select; Troubleshooting; No sound and distorted sound:; displayed. Check if the wire is connected correctly.; INVALID FORMAT; displayed Check if the input setting is compatible to the; Lcd lamp indicator on but no picture Check the monitor setting:; contrast

15 1.Press buttons to select submenu and change it in General setup page 2.Use the same way to change other submenu in AUDIO and Preference. Troubleshooting Before calling for service, you can check the following items on symptoms and solutions. No picture: Check other channel, maybe station problem...

Page 16 - Service and support; Please note; Specifications

16 Service and support Lenco has written this user manual with the utmost care. If you still have difficulties using this product after you have read user manual than you can contact us via www.lenco.eu or by phone: Lenco helpdesk: Germany 0900-1520530 (Local charges) The Netherlands 0900-23553626 (...

Page 17 - Personal notes

17 SCART CVBS & RGB PC-IN Earphone input 0.2-2.0Vrms CVBS L/R RCA input 0.2-2.0Vrms Component Speaker output 2x2.5W THD+N<10% Power In DC +12V 4A Power consumption ON 26W, Standby <1W Panel Screen size 15.4" Resolution Up to 1280x800 Luminance 200 cd/m² Contrast ratio 400:1 Viewing ang...

Page 18 - End of life

18 End of life This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for dis...