Lenco IR-2100 - Manual

7 Listen to the FM radio: In order to switch the radio from Internet radio, you need to press the “Mode” key once or select the Tuner in the menu list, the radio will then automatically tune to the nearest station; \ On the top line of the display is current station name of frequency, and the radio ...

8 Storing a radio station in a preset by the front remote control: To store a preset, you must first be listening to the station that you would like to save, then press STORE button. Then press the preset number you would like to save and allow 2 seconds to store the station into the preset. The LCD...

9 Setting the ALARM Note: If you make a mistake at any point, press BACK button to go back to the previous screen 1. Press the SELECT button. 2. Press Tune up or down until the display says<Configure>. 3. Press the SELECT button. 4. Press Tune up or down until the display says<Clock>. 5....

10 10. Press Tune up or down until the hour setting is correct, then press the SELECT button. 11. Press Tune up or down until the minute setting is correct, then press the SELECT button. The display says Alarm Set with the time of the alarm shown beneath for 3 seconds, then returns to the radio stat...

11 Instructions for streaming 1. Select Media Player on the radio. Switch on the internet radio and press BACK until you are at the top level menu. Press Tune up or down until Media Player is displayed and press the SELECT button. 2. You will be able to choose from 2 playback tracks; A. If you selec...

15 following: a. Keep pressing BACK to get to the radio’s top-level menu and then press Tune Up or Down to select ‘Media Player’. b. Press SELECT and then press Tune Up or Down to highlight ‘ UPnP Serves’. c. Press SELECT and the radio will scan for all available UPnP servers . Note, this may take a...

17 Configure Menu Choosing the option you want from the Configure Menu 1. Press the SELECT button. ( Note: If you make a mistake at any point ,press BACK button to go back to the previous screen.) 2. Press Tune Up or Down until ‘Configure’ is displayed 3. Press the SELECT button. 4. Press Tune Up or...

18 1. After select the ‘Backlight’ menu item, the radio will display its list of three menu modes: ‘Inactive’, ‘Active’ and ‘Standby’. These three states are explained below: . The radio gets into its ‘inactive’ state when there is no user activity for 30 seconds. . The ‘active’ state is when there ...

19 Configuring ‘My Stuff’ Registering an account on Reciva’s website 1. Open the website, http://www.reciva.com, from your internet browser. 2. Click on the ‘My Account’ link and follow the on-screen instructions to register an account. Please note, during the registration process, a validation code...

20 TROUBLESHOOTING 1. If you have trouble connecting the radio to your wireless network, these steps may help to resolve the problem: Confirm that a Wi-Fi or Ethernet Wired connected PC can access the internet (i.e. can browse the web) using the same network. Check that a DHCP server is available, o...

21 network. The easiest solution is to change the PC workgroup name to the same as that being supported by the server. You have not connected to the wireless Access point. On the internet radio , select ‘Configure’, ‘Network Configure’, ‘Select Network’, ‘Scan’ and then select your Wireless network....