KTI Networks KCD-303P-A2 - Manuals

Page 2 - without permission from KTI Networks Inc.; United States; BOX; International

2/18 (C) 2008 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any directive work (such as translation or transformation) without permission from KTI Networks Inc. KTI Networks Inc. reserves the right to revise this do...

Page 3 - TRADEMARKS; FCC NOTICE

3/18 The information contained in this document is subject to change without prior notice. Copyright (C) All Rights Reserved. TRADEMARKS Ethernet is a registered trademark of Xerox Corp. OptoLock TM is a registered trademark of Firecomms Ltd. FCC NOTICE This device complies with Class B Part 15 the ...

Page 4 - Table of Contents

4/18 Table of Contents 1. Introduction ................................................................................................................................5 1.1 Features ..............................................................................................................6 1.2 Pr...

Page 9 - Safety Cautions

9/18 2. Installation 2.1 Unpacking The product package contains: The switch unit One AC-DC power adapter One product CD-ROM 2.2 Safety Cautions To reduce the risk of bodily injury, electrical shock, fire, and damage to the product, observe the following precautions. Do not service any product except...

Page 10 - Mounting on a Wall

2.3 Mounting on a Wall The device can be mounted on a desktop or shelf. Make sure that there is proper heat dissipation from and adequate ventilation around the device. Do not place heavy objects on the device. To mount the device on a wall, one wall mounting hole is provided on the bottom of the de...

Page 11 - After bracket installation, the final dimension is shown below:

2.4 Panel Mounting The switches support panel mounting in industrial enclosure. A panel mounting bracket is required for the mounting. Install the bracket onto the device as shown in the figure below: After bracket installation, the final dimension is shown below: KCD-303P-A KCD-303P-B 11/18

Page 12 - bracket onto the device.

2.5 Din-Rail Mounting To mount the device on a Din-rail, the optional Din-rail mounting bracket is required. Install the bracket onto the device. After bracket installation, the device is ready to be mounted on a din-rail as shown below: 12/18

Page 13 - Applying Power with Power Adapter; C operating temperature

2.6 Applying Power with Power Adapter The device provides a DC power jack for receiving DC power input from an external AC-DC power adapter. Two types of AC-DC power adapters are available for choice. One is with typical operating temperature rating and the other is with extended operating temperatu...

Page 14 - Applying Power via USB; limited AC power sockets.

2.7 Applying Power via USB The USB port on the common computers provides an output of 5V/500mA, equally 5V/2.5Watt, for the connected USB devices. With an USB DC power cable, the USB power is applicable to the devices and serves as a handy power, and eliminates the need for extra power adapters and ...

Page 15 - Making LAN Connections; Network Cables; Link distance: Up to 100 meters; Auto-negotiation Function; use half duplex for the connection.

15/18 3. Making LAN Connections 3.1 Making Copper Port (RJ-45) Connections The copper ports support the following connection types and distances: Network Cables 10BASE-T: 2-pair UTP Cat. 3,4,5 , EIA/TIA-568B 100-ohm 100BASE-TX: 2-pair / 4-pair UTP Cat. 5, EIA/TIA-568B 100-ohm Link distance: Up to 10...

Page 16 - Making POF Connections; POF Cable; the POF cable into OptoLock; pressed closed to hold the POF in place.; POF Connector; Identify TX and RX holes on OptoLock; connector before making cable connection.

3.2 Making POF Connections POF Cable Depending on the model specified, two different sizes of POF cables are supported. One is 1.5mm and the other is 2.2mm in diameter. The following figure illustrates 2.2mm POF and Cat.5 as comparison. Easy POF Installation The design of the device enables the POF ...

Page 18 - Application in Industrial Networks; cascaded by POF cables.; Application For Home Network

4. Applications 4.1 Application in Industrial Networks The following figure illustrates an application example in an industrial network. Four devices are cascaded by POF cables. 4.2 Application For Home Network The following figure illustrates an application example in home network. 4.3 Copper to PO...