KTI Networks KC-300D - Manuals

Page 3 - Ethernet is a registered trademark of Xerox Corp.; Marking by the symbol

- 3 - The information contained in this document is subject to change withoutprior notice. Copyright (C) All Rights Reserved. TRADEMARKS Ethernet is a registered trademark of Xerox Corp. FCC NOTICE This device complies with Class B Part 15 the FCC Rules. Operation issubject to the following two cond...

Page 4 - Table of Contents

- 4 - Table of Contents 1. Introduction ......................................................... 5 1.1 Key Features ................................................................................. 51.2 Specifications ................................................................................ ...

Page 10 - Optical Specifications; Duplex Fiber Series

-10- 1.3 Optical Specifications The media converter series provides the following fiber options: Duplex Fiber Series Model Port Fiber Wavelength Tx Power Rx Sensitivity 300D-T ST MMF 1310nm -19 ~ -14dBm -31dBm 300D-C SC MMF 1310nm -19 ~ -14dBm -31dBm 300D-EC SC MMF 1310nm -20 ~ -14dBm -31dBm 300D-JM...

Page 11 - Special Functions; Auto-negotiation Function

-11- 1.4 Special Functions Auto MDI/MDI-X Function This function allows the TP port to auto-detect the twisted-pair signalsand adapts itself to form a valid MDI to MDI-X connection with theremote connected device automatically. Auto-negotiation Function When TP port is set on Auto-negotiation mode (...

Page 12 - Link Fault Pass Through Function

-12- Link Fault Pass Through Function When this function is enabled, a link fault detected on the TP port willforce a link down on the FX port. Similarly, a link fault detected on the FXport will also force a link down on the TP port. As illustrated in thefollowing figure, this function allows to pa...

Page 13 - Mounting the Device; Desktop Mounting

-13- 2. Installation 2.1 Unpacking Check that the following components have been included:• Installation guide (or contained in the product CD) • 10/100 Media Converter • One AC power adapter If any item is found missing or damaged, please contact your local resellerfor replacement. 2.2 Mounting the...

Page 14 - The AC Power Adapter Specifications; Steps to apply the power to the converters are:

-14- 2.3 Applying Power Before you begin the installation, check the AC voltage of your area. TheAC power adapter which is used to supply the DC power for the unit shouldhave the AC voltage matching the commercial power voltage in your area. The AC Power Adapter Specifications AC input power: AC pow...

Page 15 - Making TP Port Connection; TP port is featured to support connection to :; Network Cables; TP port link partner

-15- 2.4 Making TP Port Connection TP port is featured to support connection to : • Auto-negotiation devices • Auto-negotiation incapable 10BASE-T devices • Auto-negotiation incapable 100BASE-TX devices Network Cables 10BASE-T: 2-pair UTP Cat. 3,4,5 , EIA/TIA- 568 100-ohm STP 100BASE-TX: 2-pair UTP ...

Page 16 - Making FX Port Connection; Model

-16- 2.5 Making FX Port Connection FX port operates on 100Mbps and full duplex (factory default). A varietyof fiber options is provided as follows: Duplex Fiber Series Model Connector Wavelength Fiber Ref. distance 300D-T ST 1310nm Duplex MMF 2km 300D-C SC 1310nm Duplex MMF 2km 300D-JM MT-RJ 1310nm ...

Page 17 - Single Fiber Bi-Di WDM Series

-17- Single Fiber Bi-Di WDM Series Model Connector Wavelength Fiber Ref. Distance 300D-W3515 Bi-Di SC Tx 1310nm Single SMF 15 - 20km Rx 1550nm 300D-W5315 Bi-Di SC Tx 1550nm Single SMF 15 - 20km Rx 1310nm 300D-W3540 Bi-Di SC Tx 1310nm Single SMF 40km Rx 1550nm 300D-W5340 Bi-Di SC Tx 1550nm Single SMF...

Page 19 - Optional Configuration Settings; User Inaccessible Jumpers; The setting functions are as follows:

-19- 3. Optional Configuration Settings The media converter provides additional configuration settings whichare user-inaccessible. The settings are built on the board inside the prod-uct case. The settings are provided for technical installers to adapt theconverter to fit some specific application n...