Kramer WP-500 - Manuals - manualsarea.com

Page 2 - Contents; Introduction; Figures

Contents i Contents 1 Introduction 1 2 Getting Started 1 3 Overview 1 4 Defining the WP-500 3 4.1 The USB Port 5 5 Using Your WP-500 5 5.1 Connecting the WP-500 5 5.1.1 Connecting the Microphone 8 5.2 Operating the WP-500 9 6 Technical Specifications 10 Figures Figure 1: WP-500 Front Panel 3 Figure ...

Page 3 - Introduction; WP-500 Wall Plate Solution for; Getting Started; This user manual is written for the end user. Refer to the separate; Overview

Introduction 1 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent...

Page 4 - Overview; XGA EDID

KRAMER: SIMPLE CREATIVE TECHNOLOGY Overview 2 The WP-500 : • Consists of two VGA inputs, each with an unbalanced stereo audio signal, one composite video input with an unbalanced stereo audio signal, and a dynamic or condenser microphone input • Includes an RGBHV output, a composite video output and...

Page 6 - Figure 2

KRAMER: SIMPLE CREATIVE TECHNOLOGY Defining the WP-500 4 Figure 2 and Table 2 define the WP-500 rear panel: Figure 2: WP-500 Rear Panel Table 2: WP-500 Rear Panel Features # Feature Function 1 IR OUT Controls the display device via an IR emitter (for example, in cases where RS-232 control is not ava...

Page 8 - Figure 3: Connecting the WP-500 Front Panel; shown in

KRAMER: SIMPLE CREATIVE TECHNOLOGY Using Your WP-500 6 Figure 3: Connecting the WP-500 Front Panel 2. On the rear panel, connect the display device (for example, a projector) as follows. Connect the:  VGA (PC) OUTPUT to the PC Graphics (15-pin HD connector or RGBHV connector) input on the projector...

Page 9 - Figure 4: Connecting the WP-500 Rear Panel

Using Your WP-500 7 7 Figure 4: Connecting the WP-500 Rear Panel

Page 10 - Connecting the Microphone; Cond; CV; Figure 5: Setting the Microphone Mode Switch

KRAMER: SIMPLE CREATIVE TECHNOLOGY Using Your WP-500 8 5.1.1 Connecting the Microphone You can connect either a dynamic or a condenser microphone to the MIC IN 3.5mm mini jack. Before connecting the microphone, set the microphone mode switch to dynamic or condenser (by default, this switch is set to...

Page 11 - Table 3; Table 3: A Configuration Setup Example

Using Your WP-500 9 9 5.2 Operating the WP-500 The Ethernet and USB ports are used to configure the WP-500 front panel SELECT buttons 1 to perform several tasks 2 Table 3 , such as those defined in the example in . Pressing a button initiates a macro sequence 3 Table 3: A Configuration Setup Example...

Page 12 - Technical Specifications; Table 4; Table 4: Technical Specifications

KRAMER: SIMPLE CREATIVE TECHNOLOGY Technical Specifications 10 6 Technical Specifications Table 4 lists the technical specifications: Table 4: Technical Specifications 1 INPUTS: of the WP-500 1 composite video (1Vpp/75 Ω) on an RCA connector 2 VGA (PC) on 15-pin HD connectors 2 stereo analog audio o...