Kramer VS-211H - Manuals

4 VS-211H - Overview 3 Overview The VS-211H is a high-performance automatic standby switcher for HDMI video signals. The VS-211H automatically switches to the secondary input whenever the primary video signal is interrupted. If the primary signal reappears, the unit automatically switches back to th...

6 VS-211H - Using the VS-211H 4 Using the VS-211H This section describes how to:  Connect the VS-211H (see Section 4.1 )  Select the default master source signal (see Section 4.2 )  Connect the REMOTE connector (see Section 4.3 ) 4.1 Connecting the VS-211H Always switch off the power to each devi...

VS-211H - Using the VS-211H 7 Figure 2: VS-211H Connections 4.2 Selecting the Default Master Source Signal When active input sources are connected to IN 1 and IN 2, the DEFAULT INPUT switch setting determines the default master input source. If the master input signal is not detected, the VS-211H au...

8 VS-211H - Using the VS-211H 4.3 Connecting the REMOTE Terminal Block Connector Regardless of the default input switch setting, you can force the switching of the active input by remote control. To do this, connect the appropriate REMOTE input terminal block connector pins to a contact closure swit...

VS-211H - Technical Specifications 9 5 Technical Specifications INPUTS: 2 HDMI on HDMI connectors OUTPUT: 1 HDMI on an HDMI connector DATA RATE: Supports 2.25Gbps per graphic channel STANDARDS COMPLIANCE: HDCP and HDMI CONTROLS: Contact closure remote control, input default selection switch POWER CO...