Kramer VP-727T - Manuals - manualsarea.com

Page 3 - Introduction; Presentation; About the VP-727T Presentation Switcher Control Panel; Presentation Switcher Control Panel; Getting Started

Introduction 1 1 Introduction Welcome to Kramer Electronics (since 1981): a world of unique, creative and affordable solutions to the infinite range of problems that confront the video, audio and presentation professional on a daily basis. In recent years, we have redesigned and upgraded most of our...

Page 4 - Overview; The

KRAMER: SIMPLE CREATIVE TECHNOLOGY Overview 2 3 Overview The VP-727T is a unique presentation switcher control panel dedicated specifically to control the VP-727 . It is ergonomically and aesthetically designed in a rugged, professional 19" 4U rack-mountable metal enclosure with the button layou...

Page 5 - Caution; Your VP-727T Presentation Switcher Control Panel

Your VP-727T Presentation Switcher Control Panel 3 Enables special effect transitions between two sources via a robust T-bar (used for manual control of transition speeds). Alternatively, the effect can be implemented via a TAKE button, with a potentiometer to set the transition speed Features singl...

Page 8 - Figure 2 and Table 2 define the side panel of the

KRAMER: SIMPLE CREATIVE TECHNOLOGY Your VP-727T Presentation Switcher Control Panel 6 Figure 2 and Table 2 define the side panel of the VP-727T : Figure 2: VP-727T Presentation Switcher Control Panel (Side Panel) Table 2: VP-727T Presentation Switcher Control Panel (Side Panel) Features # Feature Fu...

Page 9 - Installing in a Desktop; Figure 3: Cut Out Dimensions

Installing in a Desktop 7 5 Installing in a Desktop This section describes how to install the VP-727T in a desktop 1 . To install the VP-727T in a desktop: 1. Cut an opening in the desktop—making the cut out on a wooden surface using a sabre saw or a keyhole saw—at the location where you want to ins...

Page 10 - the; Figure 6: Securing the VP-727T into the Prepared Cut Out Opening

KRAMER: SIMPLE CREATIVE TECHNOLOGY Installing in a Desktop 8 3. Insert the two mounting brackets through the bracket slits on both sides of the VP-727T unit (see Figure 5). Figure 5: Inserting the Mounting Brackets through the Bracket Slits 4. Be sure that the upper outer rim is situated parallel to...

Page 11 - Installing on a Rack

Installing on a Rack 9 6 Installing on a Rack This section describes what to do before installing on a rack and how to rack mount. Before Installing on a Rack Before installing on a rack, be sure that the environment is within the recommended range: Operating temperature range +5 to +45 Deg. Centigr...

Page 12 - Connecting the VP-727T

KRAMER: SIMPLE CREATIVE TECHNOLOGY Connecting the VP-727T 10 7 Connecting the VP-727T To connect the VP-727T to up to four VP-727 machines, as the example in Figure 7 illustrates 1 , do the following 2 : 1. Connect the “TO VP-727” RS-485 3-PIN terminal block ports of the VP-727T , as follows (see se...

Page 14 - upgrading the firmware; Figure 9: Connecting the PC

KRAMER: SIMPLE CREATIVE TECHNOLOGY Connecting the VP-727T 12 7.2 Connecting a PC (via RS-232) You can connect a PC (or other controller) to the VP-727T via the RS-232 port for upgrading the firmware . To connect a PC to a VP-727T unit, using the Null-modem adapter provided with the machine (recommen...

Page 15 - Using the VP-727T WIPE DIRECTION Buttons; To set the wipe direction, use the WIPE DIRECTION; Table 3: Defining the WIPE DIRECTIONS Buttons

Operating the VP-727 using the VP-727T 13 8 Operating the VP-727 using the VP-727T For details of how to operate the VP-727 via the OSD Menu, LCD Display, ETHERNET, and/or RS-232, including using the TAKE button, refer to the VP-727 user manual 1 . For details of how to: Use the WIPE DIRECTION butto...

Page 16 - Making the Transition; Making a Transition Manually; TAKE; Technical Specifications; Table 4: Technical Specifications

KRAMER: SIMPLE CREATIVE TECHNOLOGY Technical Specifications 14 8.2 Making the Transition You can make the transition in two ways: Manually, for each separate transition using the T-bar control lever 1 Automatically, via the TAKE button, which implements the transition at the pace set by the SPEED 2 ...

Page 18 - Disconnect the unit from the power supply before

Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: [email protected] P/N: 2900-000195 REV 1A For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your ...