Kramer VM-22H - Manuals

VM-22H - Getting Started 3 2.2 Safety Instructions Caution: There are no operator serviceable parts inside the unit Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing 2.3 R...

4 VM-22H - Overview 3 Overview The VM−22H is a distribution amplifier for HDMI signals. The unit reclocks and equalizes one of two selectable input signals and distributes it to two identical outputs. In particular, the VM-22H features:  A maximum data rate of 6.75Gbps (2.25Gbps bandwidth per graph...

6 VM-22H - Connecting the VM-22H 4 Connecting the VM-22H Always switch off the power to each device before connecting it to your VM-22H . After connecting your VM-22H , connect its power and then switch on the power to each device. To connect the VM-22H as illustrated in the example in Figure 2 : 1....

VM-22H - Acquiring the EDID 7 5 Acquiring the EDID This is usually done only once, when the machine is being set up in an installation. Once acquired, the EDID is saved in non-volatile memory and further acquisition is not necessary. Initially, the VM-22H operates with the factory default EDID. This...

VM-22H - Technical Specifications 9 6 Technical Specifications INPUTS: 2 HDMI connectors OUTPUTS: 2 HDMI connectors MAX. DATA RATE: 6.75Gbps (2.25Gbps per graphic channel) COMPLIANCE W ITH HDMI STANDARD: Supports HDMI and HDCP CONTROLS: EDID SETUP button, input select button INDICATOR LEDs: IN 1, IN...