Kramer VA-4H - Manuals

VA-4H - Getting Started 3 2.3 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer El...

4 VA-4H - Overview 3 Overview The VA-4H is an EDID controller for HDMI signals. The unit inputs up to four HDMI channels and lets you select an EDID for each channel from the display, an internal default EDID or to pass the signal through without change. The VA-4H features: • A maximum data rate of ...

VA-4H - Connecting the VA-4H 7 5 Connecting the VA-4H Always switch off the power to each device before connecting it to your VA-4H . After connecting your VA-4H , connect its power and then switch on the power to each device. To connect the VA-4H as illustrated in the example in Figure 3 : 1. Conne...

8 VA-4H - Operating the VA-4H 6 Operating the VA-4H To set the EDID source for each channel as illustrated in the example in Figure 3 : 1. Press and hold the CAPTURE pushbutton. The indicator LEDS illuminate in a cycle as follows: MONITOR, lower green LED DEFAULT, upper red LED PASS, both LEDS toget...

VA-4H - Technical Specifications 9 7 Technical Specifications INPUTS: 4 HDMI connectors OUTPUTS: 4 HDMI connectors MAX. DATA RATE 2.25Gbps per data channel COMPLIANCE W ITH HDMI STANDARDS: HDMI, HDCP 1.2 RESOLUTION: 1080p @60Hz POWER SOURCE: 5V DC, 50mA CONTROLS: 4 source selector pushbuttons, RS-23...