Kramer TP-45 - Manuals

Kramer TP-45 – Manual in PDF format online.

Manuals:

Manual

Manual Kramer TP-45

Summary

Page 3 - Introduction; omponent/XGA – Audio; Getting

Introduction 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent y...

Page 4 - Getting Started; Quick Start; Connect the input and the output (XGA mode)

KRAMER: SIMPLE CREATIVE TECHNOLOGY Getting Started 2 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps. Connecting options: Connect theInput to theTP-45/TP-45RC Connect theCAT 5 cable Connect tothe nextTP-46 unit Connect the Outputto the TP-46 1 2 3 4 Connect the ...

Page 5 - Overview; Component/XGA – Audio Transmitter

Overview 3 3 Overview The TP-45/TP-45RC and TP-46 are a twisted pair transmitter and receiver for component video (YUV) or computer graphics video and unbalanced stereo audio or S/PDIF audio signals. The TP-45/TP-45RC transmitter converts audio and video to a twisted pair signal and the TP-46 conver...

Page 6 - Component/UXGA – Audio Transmitter; About the Power Connect Feature

KRAMER: SIMPLE CREATIVE TECHNOLOGY Overview 4 • Digital audio input (S/PDIF) on an RCA connector and a stereo analog input on a 3.5mm mini jack • The Power Connect feature where one unit can power the other over the same twisted pair cable (see section 3.1 ) • 12V DC power The TP-45RC Component/UXGA...

Page 7 - Recommendations for Achieving the Best Performance

Overview 5 3.2 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP) We recommend that you use Shielded Twisted Pair (STP) cable. There are different levels of STP cable available, and we advise you to use the best quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP i...

Page 8 - Your Component/XGA – Audio Transmitter and Receiver; This section describes the:; Your TP-45 Component – S/PDIF Line Transmitter; Figure 1; Feature

KRAMER: SIMPLE CREATIVE TECHNOLOGY Your Component/XGA – Audio Transmitter and Receiver 6 4 Your Component/XGA – Audio Transmitter and Receiver This section describes the: • TP-45 Component/XGA – Audio Transmitter , see section 4.1 • TP-45RC Component/UXGA – Audio Transmitter , see section 4.2 • TP-4...

Page 9 - Figure 2; Your TP-45RC Component – S/PDIF Line Transmitter; Figure 3

Your Component/XGA – Audio Transmitter and Receiver 7 Figure 2 and Table 2 define the underside of the TP-45 : Figure 2: TP-45 Component/XGA – Audio Transmitter (Underside) Table 2: TP-45 Component/XGA – Audio Transmitter (Underside) Features # Feature Function 12 VS Switch Slide the switch up 1 (to...

Page 10 - Your TP-46 Component/XGA – Audio Receiver; Figure 4

KRAMER: SIMPLE CREATIVE TECHNOLOGY Your Component/XGA – Audio Transmitter and Receiver 8 Table 3: TP-45RC Component/XGA – Audio Transmitter Features # Feature Function 1 XGA IN 15-pin HD (F) Connector Connect to the XGA source 2 LINE OUT RJ-45 Connector Connect to the LINE IN connector on the TP-46 ...

Page 11 - Figure 5

Your Component/XGA – Audio Transmitter and Receiver 9 Table 4: TP-46 Component/XGA – Audio Receiver Features # Feature Function 1 XGA OUT 15-pin HD (F) Connector Connect to the XGA acceptor 2 LINE IN RJ-45 Connector Connect to the LINE OUT RJ-45 connector on the TP-45 1 3 LINE OUT RJ-45 Connector Co...

Page 12 - Connecting a Component/XGA – Audio Distribution System; video; In the component video mode, a component video source is connected; audio; In the analog mode, an analog audio source is connected to the input

KRAMER: SIMPLE CREATIVE TECHNOLOGY Connecting a Component/XGA – Audio Distribution System 10 5 Connecting a Component/XGA – Audio Distribution System The Component/XGA – Audio Distribution System can be configured to operate in one of two video modes: • In the XGA mode, a computer graphics source is...

Page 13 - Connecting the System in XGA Mode; Figure 6

Connecting a Component/XGA – Audio Distribution System 11 5.1 Connecting the System in XGA Mode To configure a TP-45/TP-45RC and TP-46 Component/XGA – Audio distribution system 1 in the XGA mode, as illustrated in the example in Figure 6 , do the following: 1. On the TP-45 or TP-45RC , connect the f...

Page 14 - Figure 6: Component/XGA – Audio Distribution System, XGA Mode

KRAMER: SIMPLE CREATIVE TECHNOLOGY Connecting a Component/XGA – Audio Distribution System 12 7. Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity on both 1 the TP-45 and the TP-46 (not shown in Figure 6 ). The signal from the XGA source is transmit...

Page 15 - Connecting the System in Component Video Mode; Figure 7

Connecting a Component/XGA – Audio Distribution System 13 5.2 Connecting the System in Component Video Mode To configure a TP-45/ TP-45RC/TP-46 Component/XGA – Audio distribution system 1 in the component video mode, as the example in Figure 7 illustrates, do the following: 1. On the TP-45 or TP-45R...

Page 18 - Connecting the TP-45RC Remote Control; Connect momentary push-buttons and LEDs; Figure 8: The TP-45RC Remote Control Connection

KRAMER: SIMPLE CREATIVE TECHNOLOGY Connecting a Component/XGA – Audio Distribution System 16 5.3 Connecting the TP-45RC Remote Control Connect momentary push-buttons and LEDs 1 to a cable and attach the cable to a 5-pin terminal block for connection to the TP-45RC control port as shown in Figure 8 ....

Page 19 - Wiring the Twisted Pair LINE IN / LINE OUT RJ-45 Connectors; Table 6: Twisted Pair PINOUT; PIN

Connecting a Component/XGA – Audio Distribution System 17 5.4 Wiring the Twisted Pair LINE IN / LINE OUT RJ-45 Connectors Table 6 and Figure 9 define the twisted pair pinout, using a straight pin-to-pin cable with RJ-45 connectors: Table 6: Twisted Pair PINOUT Figure 9: Twisted Pair PINOUT EIA /TIA ...

Page 20 - Technical Specifications; Technical; Table 7; Table 7: Technical Specifications; VIDEO Specifications

KRAMER: SIMPLE CREATIVE TECHNOLOGY Technical Specifications 18 6 Technical Specifications Table 7 defines the technical specifications 1 : Table 7: Technical Specifications 2 of the TP-45/TP-45RC/TP-46 VIDEO Specifications INPUTS: TP-45/RC 1 VGA/UXGA 1Vpp/75 Ω on a 15-pin HD connector 1 component 1V...

Page 22 - Disconnect the unit from the power supply before

Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: [email protected] P/N: 2900-000424 REV 3 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your q...