Kramer TP-114 - Manuals - manualsarea.com

Page 2 - Contents; Introduction; Figures

Contents i Contents 1 Introduction 1 2 Getting Started 1 2.1 Getting Started 2 3 Overview 3 3.1 About the Power Connect Feature 3 3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP) 3 3.3 Recommendations for Achieving the Best Performance 4 4 Your TP-114 1:4 X...

Page 3 - Introduction; Transmitter – DA; Getting

Introduction 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent y...

Page 4 - Getting Started; Step 2: Connect the power; Display 4; Local; Step 1: Connect the inputs and outputs - see section 5

KRAMER: SIMPLE CREATIVE TECHNOLOGY Getting Started 2 2.1 Getting Started This quick start chart summarizes the basic setup and operation steps. Step 2: Connect the power Step 3: Change the polarity - see section 5 You can change the polarity ofdecoding H and V Sync for video(see Figure 4 and Table 2...

Page 5 - Overview; About the Power Connect Feature

Overview 3 3 Overview Your Kramer TOOLS TP-114 1:4 XGA/HD DA/CAT 5 Transmitter is a high-performance distribution amplifier for computer graphics video or HDTV signals. It converts a computer graphics video or HDTV signal on a 15-pin HD connector to four identical twisted pair signals. The TP-114 : ...

Page 6 - Recommendations for Achieving the Best Performance

KRAMER: SIMPLE CREATIVE TECHNOLOGY Overview 4 cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP , may be used. Bear in mind, though, that we advise using STP cables where possible, since the compliance to electromagnetic interference was tested using those cables. Although Unshiel...

Page 7 - Feature; TP-120 XGA Line Receiver

Your TP-114 1:4 XGA/HD DA/CAT 5 Transmitter 5 4 Your TP-114 1:4 XGA/HD DA/CAT 5 Transmitter Figure 1 and Table 1 define the TP-114 : Figure 1: TP-114 1:4 XGA/HD DA/CAT 5 Transmitter Table 1: TP-114 1:4 XGA/HD DA/CAT 5 Transmitter Features # Feature Function 1 LINE OUT 1 RJ-45 Connector Connects to 1...

Page 8 - Configuring a TP-114 XGA/HD Line Transmitter – DA System; Figure 2; VS Switch; Figure 3

KRAMER: SIMPLE CREATIVE TECHNOLOGY Configuring a TP-114 XGA/HD Line Transmitter – DA System 6 Figure 2 and Table 2 define the TP-114 underside panel: Figure 2: TP-114 1:4 XGA/HD DA/CAT 5 Transmitter (Underside Panel) Table 2: TP-114 1:4 XGA/HD DA/CAT 5 Transmitter (Underside Panel) Features # Featur...

Page 11 - Technical Specifications; Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors; Table 3: CAT 5 PINOUT; PIN; Technical; Table 4

Technical Specifications 9 5.1 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors Table 3 and Figure 4 define the UTP CAT 5 PINOUT, using a straight pin to pin cable with RJ-45 connectors: Table 3: CAT 5 PINOUT Figure 4: CAT 5 PINOUT EIA /TIA 568A EIA /TIA 568B PIN Wire Color PIN Wire Color 1 Gree...

Page 13 - Disconnect the unit from the power supply before

Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: [email protected] P/N: 2900-000183 REV 2 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your q...