Kramer SPK-C612 - Manuals - manualsarea.com

Page 2 - Contents

SPK-C612 – Contents i Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3 Overview 3 4 Your SPK-C612 Closed-back Ceiling Speakers 4 5 Installing the SPK-C612 Closed-back Ceiling Speakers 6 5.1 Choosing the Best Location 6 5.2 Cutting the Ceiling Tile 6 5.3 Mounting t...

Page 3 - Introduction

SPK-C612 - Introduction 1 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. I...

Page 4 - Getting Started; Achieving the Best Performance

2 SPK-C612 - Getting Started 2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual • Use Kramer high-performance high-resolution cables Go t

Page 5 - Overview

SPK-C612 - Overview 3 3 3 Overview The SPK-C612 consists of a pair of high performance closed back speakers. The pair can be mounted on the ceiling, as well as via a ceiling mounting kit used to safely secure the speakers to the ceiling. The SPK-C612 speakers feature a diameter of 6.5”, a resistance...

Page 9 - Mounting the Speakers; Ceiling Tile

SPK-C612 - Installing the SPK-C612 Closed-back Ceiling Speakers 7 7 Do not nail or staple the speaker wires. If you are mounting the speakers onto a ceiling tile, remove the ceiling tiles where you plan to install the speakers. Use the template to trace and then cutout the speaker hole over an empty...

Page 10 - Wiring in parallel

8 SPK-C612 - Installing the SPK-C612 Closed-back Ceiling Speakers 2. Place the tile rails on the tile and snap them into the two tabs on the C-ring. Align the rails so that the ends extend over the T-channel grid. 3. Insert a screw through each tab on the C-ring to secure the rails. 4. Connect the s...

Page 11 - Note

SPK-C612 - Installing the SPK-C612 Closed-back Ceiling Speakers 9 9 8. Tighten the mounting tabs by turning the screw counter clockwise (see Figure 6 ). The first quarter turn, rotates the tab outwards, and the following turns tighten the tabs to the rear side of the ceiling surface When tightening ...

Page 12 - Painting the Speaker

10 SPK-C612 - Installing the SPK-C612 Closed-back Ceiling Speakers 11. Install the grilles to the speakers:  Push the grille fastener into the hole in front of the baffle  Press the grille into place until the front of the grille is flush with the rim of the baffle  Check that the grille is secur...

Page 13 - Technical Specifications

SPK-C612 - Technical Specifications 11 11 6 Technical Specifications Audio and Power DESCRIPTION: 2-way co-axial low-profile ceiling speakers with metal back can HIGH FREQUENCY DRIVER: 1" MYLAR dome tweeter LOW FREQUENCY DRIVER: 6.5” Polypropylene cone with rubber edge woofer IMPEDANCE: 8Ω DISPE...