Kramer SPK-C411 - Manuals

2 SPK-C411 / SPK-C412 - Getting Started 2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual • Use Kramer high-performance high-resolution cables Go t

SPK-C411 / SPK-C412 - Overview 3 3 3 Overview The SPK-C411 / SPK-C412 Closed-back Ceiling speakers consist of a pair of high performance closed back speakers. The pair can be mounted on the ceiling, as well as via a ceiling mounting kit used to safely secure the speakers to the ceiling. The speakers...

4 SPK-C411 / SPK-C412 - Your Closed-back Ceiling Speakers 4 Your Closed-back Ceiling Speakers Figure 2 defines the SPK-C411 / SPK-C412 . Figure 2: SPK-C411/ SPK-C412 Closed-back Ceiling Speaker The following table defines the Closed-back Ceiling speaker hardware items (per speaker pair) for each mod...

6 SPK-C411 / SPK-C412 - Installing the Closed-back Ceiling Speakers 5 Installing the Closed-back Ceiling Speakers This section explains how to install the SPK-C411 / SPK-C412 closed-back ceiling speakers, that is: • Choosing the best place to locate your speakers (see Section 5.1 ) • Cutting the cei...

SPK-C411 / SPK-C412 - Installing the Closed-back Ceiling Speakers 7 7 Do not nail or staple the speaker wires. If you are mounting the speakers onto a ceiling tile, remove the ceiling tiles where you plan to install the speakers. Use the template to trace and then cutout the speaker hole over an emp...

8 SPK-C411 / SPK-C412 - Installing the Closed-back Ceiling Speakers 2. Place the tile rails on the tile and snap them into the two tabs on the C-ring. Align the rails so that the ends extend over the T-channel grid. 3. Insert a screw through each tab on the C-ring to secure the rails. 4. Connect the...

SPK-C411 / SPK-C412 - Installing the Closed-back Ceiling Speakers 9 9 8. Tighten the mounting tabs by turning the screw counter clockwise (see Figure 6 ). The first quarter turn, rotates the tab outwards, and the following turns tighten the tabs to the rear side of the ceiling surface When tightenin...

10 SPK-C411 / SPK-C412 - Installing the Closed-back Ceiling Speakers 11. Install the grilles to the speakers:  Push the grille fastener into the hole in front of the baffle  Press the grille into place until the front of the grille is flush with the rim of the baffle  Check that the grille is sec...

SPK-C411 / SPK-C412 - Technical Specifications 11 11 6 Technical Specifications SPK-C411 Audio and Power DESCRIPTION: 2-way ceiling speakers with metal back can HIGH FREQUENCY DRIVER: 1/2" MYLAR dome tweeter LOW FREQUENCY DRIVER: 4” Polypropylene cone with rubber edge woofer IMPEDANCE: 4Ω DISPER...