Kodak 6J7611A - Manuals

1-2 A-61500 May 2010 Scanner models • Kodak i610 Scanner is a desktop duplex black and white and grayscale scanner with an automatic document feeder that runs at 80 pages per minute which includes an enhanced printer. • Kodak i620 Scanner is a desktop duplex color scanner with an automatic document ...

A-61500 May 2010 1-3 Scanner features • Excellent paper handling, image quality, and reliability. • For i600/i700 Series Scanners minimum paper length is 2.5 inches (63.5 mm) • Maximum paper length for i600 Series Scanners is 34 inches (863.6 mm) and i700 Series Scanners 40 inches (1016 mm) • Color ...

1-4 A-61500 May 2010 Optional accessories Kodak Feeder Kit for Ultra-Lightweight Paper — allows you to feed lightweight paper from a paper weight range of 25 to 75 g/m 2 (7 to 20 lbs). Kodak White Background Accessory — if you are scanning translucent documents, this accessory will reduce black back...

A-61500 May 2010 1-5 Supporting documentation The following documentation is available to support the Kodak i600/ i700 Series Scanners: • Scanning Setup Guide, A-61504 — available in PDF format on the Installation CD. • Quick Tips Guide, A-61501— intended to be used as a quick reference for basic sc...

1-6 A-61500 May 2010 User precautions Users and their employer need to observe the common sense precautions applicable to the operation of any machinery. These include, but are not limited to, the following: • The scanner weighs 38.6 kg (85 lbs). Use appropriate precautions when relocating the scann...

A-61500 May 2010 1-7 Taiwan WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Peoples Republic of China WARNING: This is a Class A product. In a domestic environment this product m...

A-61500 May 2010 2-1 2 Getting Started Site specifications Place the scanner: • In a clean area with temperature and relative humidity typical of an office environment, • on a stable, level work surface, • within 1.52 metres (5 feet) of an electrical power outlet. IMPORTANT: Only use the scanner ind...

2-2 A-61500 May 2010 Making connections Follow the instructions for installing the IEEE-1394 (FireWire) card and the Kodak driver software before you plug the scanner into the host computer. IMPORTANT: You must install the software on the host computer before you connect the scanner. Installing the ...

A-61500 May 2010 2-3 Attaching the power cord The Kodak i600/i700 Series Scanner is packed with a set of power cords. 1. Select the power cord which complies with your electrical requirements and attach it. 2. Turn on the scanner and wait until the top green LED is lit indicating the scanner has com...

2-4 A-61500 May 2010 7 Stop/Pause and Start/Resume buttons — 8 LEDs — illuminate or flash from top to bottom as follows: Illuminates when the power is turned on and the scanner is idle. This indicator will flash if the scanner is in “sleep” or lamp saver mode. illuminates when the scanner is enabled...

2-6 A-61500 May 2010 Sensors — the scanner has 3 (ultrasonic) multi-feed detection sensors, 1 (optical) paper path sensor and 1 (optical) paper present sensor. These sensors detect the presence of documents in the elevator tray and documents in the paper path during feeding and imaging. Rear view Po...

A-61500 May 2010 3-1 3 Using the Scanner This chapter provides the following operational procedures: • Turning on/off the scanner • Starting, stopping, pausing and resuming the scanner • Document preparation • Adjusting the side guides and output tray • Scanning documents • Feeding long documents • ...

3-2 A-61500 May 2010 Manually pausing and resuming the scanner While scanning documents: • Press the Stop/Pause button on the scanner once to pause scanning. NOTE: Your application may configure the scanner with a transport timeout function which signals an End of Job. If you do not start/resume sca...

A-61500 May 2010 3-3 Document preparation Before you begin scanning documents, make certain the documents can be fed through the scanner easily. • A batch of documents to be fed into the scanner must be arranged so the leading edges of all documents are aligned and centered under the feed module; th...

A-61500 May 2010 3-5 Locking the side guides Side guides may be locked into position after they are adjusted. This may be helpful when the placement of print strings is important. If you want to lock the side guides into position, move any documents which may be in the input tray and move the lockin...

A-61500 May 2010 3-7 Adjusting the output tray for documents from 43 cm (17 in.) to 86 cm (34 in.) An output tray document extender is available for scanning documents from 43 cm (17 in.) to 86 cm (34 in.). Contact your Kodak Field Engineer (1-800-3KODAK3) to order the document extender (Part No. 5E...

A-61500 May 2010 3-9 Feeding documents using multi-feed detection The scanner has three multi-feed detection sensors. When Multi-feed detection is enabled, adjust the side guides so the documents fully cover at least one sensor. If the document partially covers a sensor, false multi-feeds may occur....

3-10 A-61500 May 2010 Continuous feeding Continuous feeding can be used when you want to scan small batches of documents (less than 25). When the scanner is configured for continuous feeding, the elevator tray is raised to a position where approximately 25 documents can be loaded. The elevator tray ...

A-61500 May 2010 3-11 Feeding documents that require special handling The gap release lever allows you to manually adjust the space between the feed module and separation roller for documents that require special handling; i.e. documents that are badly torn. If you are in doubt about whether a damag...

3-12 A-61500 May 2010 Image calibration Use the calibration target provided with your scanner. Be sure to use a good, clean calibration target. Additional calibration targets can be ordered. See Chapter 5, “Supplies and accessories” for ordering information. NOTE: The screens shown in this section a...

A-61500 May 2010 3-13 7. Click the Setup icon to access the main Kodak Scanner window. 8. Click Settings . The following screen will be displayed. 9. Click Device .

3-14 A-61500 May 2010 The following screen will be displayed. 10. Click Diagnostics . The following screen will be displayed. 11. Click Calibrate . 12. Select Image . Calibration begins. A confirmation box is displayed when calibration is complete. 13. Click OK .

A-61500 May 2010 4-1 4 The Enhanced Printer This chapter provides instructions for using the Enhanced Printer. The following information and procedures can be found in this chapter: • Overview information about the Enhanced Printer, including information about print fields and printer specifications...

4-2 A-61500 May 2010 Printer specifications Characteristic Description Maximum lines 1 Maximum characters 40 Print locations (horizontal) 8 front manually set, Print locations (vertical) Set by capture software application Print orientation 0, 90, 180 or 270 degrees Font size 2 selectable, Bold or N...

A-61500 May 2010 4-3 Accessing the Enhanced Printer When changing the ink cartridge, setting printer positions or replacing the ink cartridge carrier, you will need to access the Enhanced Printer. 1. Remove the output tray. 2. Open the printer access cover. 3. Do the function you want to perform (i....

4-4 A-61500 May 2010 Changing the printer position There are 8 print positions for the printer. Make sure the printer is in the correct position for your documents. 1. Remove the output tray and open the printer access cover. 2. Locate the printer position slots. 3. Determine which printing position...

A-61500 May 2010 5-1 5 Maintenance This chapter provides: • a cleaning frequency chart • a list of cleaning tools and materials • a list of supplies and accessories • cleaning procedures for the scanner• replacement procedures for parts that are customer-replaceable IMPORTANT: Scanner components mar...

A-61500 May 2010 5-3 Supplies and accessories Contact your scanner supplier to order supplies. NOTE: Items and catalog numbers are subject to change. Ordering parts The following parts can be ordered from Parts Services. Item CAT No. Kodak Feeder Consumables Kit for i600/i700/i1800 Series Scanners 1...

5-4 A-61500 May 2010 Cleaning procedure Follow the cleaning procedure below to ensure the best scanner performance and image quality. Cleaning the output tray and elevator area 1. Power down the scanner and unplug it from the wall receptacle. 2. Remove the output tray. 3. Thoroughly vacuum the outpu...

A-61500 May 2010 5-5 Cleaning the drive rollers 5. Manually rotate and wipe the NFR and drive rollers with a roller cleaning pad. IMPORTANT: The roller cleaning pad contains sodium lauryl ether sulfate and sodium silicate which can cause eye irritation. Refer to the MSDS for more information.Wash ha...

5-6 A-61500 May 2010 10. Reinstall the separation roller. Cleaning the feed module tires 11. Lift up the printer access cover. 12. Push the release lever down (located underneath the printer access cover) to release and remove the feed module. 13. Manually rotate and wipe the feed module tires with ...

5-8 A-61500 May 2010 Cleaning the scanner transport area 17. Thoroughly vacuum the entire transport area, paying particular attention to these areas: • the edges of the transport• the reflective tape near the front of the transport• the reflective tape near the front of the pod • the three paper pat...

A-61500 May 2010 5-9 Cleaning the background strips 18. Using the green tabs pull off the upper and lower background strips and set them aside. 19. Vacuum the areas where the background strips are adhered to. 20. Reinstall the upper and lower background strips. Cleaning the imaging guides 21. Turn t...

A-61500 May 2010 5-15 12. Align the tabs on the upper housing with the slots on the lower housing. 13. Press the upper and lower housings together until they snap into place. 14. Reinstall the feed module by aligning the pins, fitting it into position and pulling up on the release lever to lock it i...

A-61500 May 2010 6-1 6 Troubleshooting This chapter provides: • A description of the indicator lights located on the front of the scanner. • Information about accessing the Operator Log.• A problem solving chart.• A message listing of possible errors you may encounter while using the scanner. Indica...

A-61500 May 2010 6-3 Accessing the Operator Log The Operator Log is accessed through the Scan Validation Tool. 1. Select Start>Programs>Kodak>Document Imaging>Scan Validation Tool . 2. From the Driver Types box, select TWAIN . 3. Open the Scan Validation Tool. 4. Select Kodak Scanner: i6...

A-61500 May 2010 6-5 7. Click Diagnostics . The following screen will be displayed. 8. Click the Logs tab. 9. From the drop down box, select Operator to display the Operator log. The most current log entries are displayed at the top of the list. See the following Message Listing for an explanation o...

A-61500 May 2010 6-11 i600 Series Scanners Numerical Message listing Use the following numeric listing to quickly find an error. Use the previous Message Listing chart for details and actions regarding the error condition. ID# Operator Message 1 Paused waiting for host 4 Invalid job setup 5 Unable t...

6-20 A-61500 May 2010 Problem solving Use the chart below as a guide to check possible solutions to problems you may encounter when using the Kodak i600/i700 Series Scanners. Problem Possible Solution Scanner does not power on Make sure that:• the power cord is plugged securely into the receptacle i...

Eastman Kodak Company 343 State Street Rochester, NY 14650 U.S.A.© Kodak, 2010. All rights reserved. TM: Kodak 6J7611A CYAN MAGENTA YELLOW BLACK CYAN 8.5 x 11” Folded GUIDE COVER-KODAK SCANNERS FONTS Whitney K Family SIZE P/N SWATCHES FILE FORMAT DESIGN/IMPLEMENTATION DATE 04.07.10 6J7611A DE MEYER ...