Page 2 - INSTALLATION REQUIREMENTS; Tools and Parts; Tools Needed; Location Requirements; Your safety and the safety of others are very important.; DANGER
2 BUILT-IN OVEN SAFETY INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools Needed ■ Phillips screwdriver ■ Measuring tape ■ Drill (for wall cabinet installations) ■ 1 /...
Page 4 - INSTALLATION INSTRUCTIONS; Combination; WARNING
4 INSTALLATION INSTRUCTIONS Prepare Built-In Microwave/Oven Combination NOTES: ■ Refer to the following “Installation Instructions” and the “Installation Instructions” section of the Installation Instructions provided with your built-in microwave/oven combination. ■ Refer and adhere to the “Electric...
Page 6 - Replace Plastic Spacers
6 2. Install a foot on the left rear spacer using a #8-18 x 3 / 8 " screw. NOTE: Position the foot so the long side of the foot is facing toward the top of the oven. 3. In the same manner, install a foot on the right rear of the oven. 4. Install a front foot on the left front spacer using a #8-1...
Page 8 - Complete Installation
8 8. Reconnect power. 9. The display panel will light briefly, and “PF” should appear in the display. 10. If the display panel does not light, refer to the “Assistance or Service” section of the Use and Care Guide provided with your built-in oven or contact the dealer from whom you purchased your ov...
Page 9 - Outillage et pièces; Outils nécessaires; Exigences d’emplacement; Votre sécurité et celle des autres est très importante.; AVERTISSEMENT
9 SÉCURITÉ DU FOUR ENCASTRÉ EXIGENCES D’INSTALLATION Outillage et pièces Rassembler les outils et pièces nécessaires avant d’entreprendre l’installation. Lire et observer les instructions fournies avec chacun des outils de la liste ci-dessous. Outils nécessaires ■ Tournevis Phillips ■ Mètre ruban ■ ...
Page 11 - INSTRUCTIONS D’INSTALLATION; Préparation de l’ensemble des fours
11 INSTRUCTIONS D’INSTALLATION Préparation de l’ensemble des fours encastrés (micro-ondes/four) REMARQUES : ■ Consulter la section suivante “Instructions d'installation” et la section “Instructions d'installation” des instructions d’installation fournies avec l'ensemble micro-ondes/four encastré. ■ ...
Page 12 - Positionnement des pieds du four
12 3. Aligner les charnières de porte dans les encoches situées en bas/à l’avant de la cavité du four à un angle de 45°. Insérer doucement la porte tout en veillant à garder un angle de 45°. Lorsque l’on sent un léger abaissement de la porte, cela signifie qu’elle est bien positionnée dans l’encoche...
Page 15 - Achever l’installation
15 3. Aligner l’onglet de l’évent (B) avec le châssis du four (A) comme illustré. 4. Avec une vis n° 8-18 x 3 / 8 " (E) pour chaque côté du support del’évent (B), fixer solidement l’évent au four. 5. Réinstaller les grilles du four. 6. Réinstaller la porte du four. Voir la section “Réinstaller l...