Kenwood TS-990SHF- Manuals

44 1973 TS-900 The all-band SSB transceiver is making history for its state-of-the-art technology. 1982 TS-930 The HF transceiver is the world’s fi rst Ham Radio transceiver equipped with built-in automatic antenna tuner 1985 TS-940 The HF transceiver offers the high dynamic range that won the strug...

Comparison 3rd order Intercept Point characteristics Intercept Point [dBm] Interfering wave separation [kHz] frx=14.2MHz,PRE AMP OFF,BW 500Hz,MODE CW, -20.00 1 10 100 -10.00 0.00 10.00 20.00 30.00 40.00 50.00 TS-990S Our old model 6 A key point in tapping maximum performance from the 1st mixer in ac...

7 1st Mixer The transceiver uses a down-conversion method for all amateur band reception, and features five types of High-IP roofing filter. Narrow bandpass widths selectable are 500 Hz and 270 Hz for CW operation, 2.7kHz for SSB and 6kHz and 15kHz, which are suitable for AM/FM. These filters are au...

Triple DSP Sub Receiver Frequencies of 500 Hz and 2.7 kHz are standard for sub-receiver roofing filters. You can maintain a Roofing filter, 500 Hz, 2.7 kHz more or less flat dynamic range even if interference impinges on your reception frequency, thanks to superior close-in dynamic range properties....

Band Elimination Filter -1,000 -80 -60 -40 -20 0 -500 0 500 1,000 A m p litu d e ( d B ) Frequency (Hz) For main IF DSP, transmission unit ADSP-21363 clock @333 MHz For sub IF DSP, every kind of signal processingADSP-21369 clock @260 MHz For band scopeADSP-21363 clock @333 MHz Advanced AGC control, ...

Transmit ANT 1 2 3 4 MAIN RX ANT OFF MAIN BAND RECEIVER SUB BAND RECEIVER OFF ON ON AT RX TX MAIN BAND ANT Selector SUB BAND ANT Selector Transmission Unit RX OUT RX IN SUB RX ANT 3rd order TX IMD 14.2MHz / 200W SPAN 10 kHz 10 dB / div -10 -50 -70 -90 -30 FET attributes. Further, you can realize Ken...

Dual display The combination of two displays, main and sub band, allows you to simultaneously monitor the target signal and the surrounding area with minimal eye movement. Fitted with dual TFT displays for an intuitive situational understanding. Main display example views Equalizer view Waterfall vi...

12 Control The panel layout, familiar to Kenwood users, allows for intuitive operation. It is sure to win you over, increasing the accuracy of your operations and allowing you to develop greater familiarity with the equipment. Comfortable operational performance that you can control at will. You can...

Kenwood SKY COMMAND SYSTEM II Commander TH-D72E / TM-D710E 430 MHz /144 MHz Transporter TH-D72E / TM-D710E 430 MHz /144 MHz HF Transceiver TS-990S COM connector ø3.5 mm EXT SP MIC HF antenna 430 MHz band Confirmation of HF frequency 144 MHz band HF receive audio 430 MHz band Voice signals, Control s...

14 Front/Back Panel HF/50MHz TRANSCEIVER TS-990S Back Panel Antenna Connector ×4 RX IN Connector (RCA): Receive Only Antenna Terminal RX OUT Connector (RCA): External Receiver Connection Terminal Key Jack ( ϕ 6.3 mm): For Paddle, Vertical Bug Key, and PC Keying ACC2 Connector (13 Pin DIN): Audio I/O...

44 1973 TS-900 The all-band SSB transceiver is making history for its state-of-the-art technology. 1982 TS-930 The HF transceiver is the world’s fi rst Ham Radio transceiver equipped with built-in automatic antenna tuner 1985 TS-940 The HF transceiver offers the high dynamic range that won the strug...

Comparison 3rd order Intercept Point characteristics Intercept Point [dBm] Interfering wave separation [kHz] frx=14.2MHz,PRE AMP OFF,BW 500Hz,MODE CW, -20.00 1 10 100 -10.00 0.00 10.00 20.00 30.00 40.00 50.00 TS-990S Our old model 6 A key point in tapping maximum performance from the 1st mixer in ac...

7 1st Mixer The transceiver uses a down-conversion method for all amateur band reception, and features five types of High-IP roofing filter. Narrow bandpass widths selectable are 500 Hz and 270 Hz for CW operation, 2.7kHz for SSB and 6kHz and 15kHz, which are suitable for AM/FM. These filters are au...

Triple DSP Sub Receiver Frequencies of 500 Hz and 2.7 kHz are standard for sub-receiver roofing filters. You can maintain a Roofing filter, 500 Hz, 2.7 kHz more or less flat dynamic range even if interference impinges on your reception frequency, thanks to superior close-in dynamic range properties....

Band Elimination Filter -1,000 -80 -60 -40 -20 0 -500 0 500 1,000 A m p litu d e ( d B ) Frequency (Hz) For main IF DSP, transmission unit ADSP-21363 clock @333 MHz For sub IF DSP, every kind of signal processingADSP-21369 clock @260 MHz For band scopeADSP-21363 clock @333 MHz Advanced AGC control, ...

Transmit ANT 1 2 3 4 MAIN RX ANT OFF MAIN BAND RECEIVER SUB BAND RECEIVER OFF ON ON AT RX TX MAIN BAND ANT Selector SUB BAND ANT Selector Transmission Unit RX OUT RX IN SUB RX ANT 3rd order TX IMD 14.2MHz / 200W SPAN 10 kHz 10 dB / div -10 -50 -70 -90 -30 FET attributes. Further, you can realize Ken...

Dual display The combination of two displays, main and sub band, allows you to simultaneously monitor the target signal and the surrounding area with minimal eye movement. Fitted with dual TFT displays for an intuitive situational understanding. Main display example views Equalizer view Waterfall vi...

12 Control The panel layout, familiar to Kenwood users, allows for intuitive operation. It is sure to win you over, increasing the accuracy of your operations and allowing you to develop greater familiarity with the equipment. Comfortable operational performance that you can control at will. You can...

Kenwood SKY COMMAND SYSTEM II Commander TH-D72E / TM-D710E 430 MHz /144 MHz Transporter TH-D72E / TM-D710E 430 MHz /144 MHz HF Transceiver TS-990S COM connector ø3.5 mm EXT SP MIC HF antenna 430 MHz band Confirmation of HF frequency 144 MHz band HF receive audio 430 MHz band Voice signals, Control s...

14 Front/Back Panel HF/50MHz TRANSCEIVER TS-990S Back Panel Antenna Connector ×4 RX IN Connector (RCA): Receive Only Antenna Terminal RX OUT Connector (RCA): External Receiver Connection Terminal Key Jack ( ϕ 6.3 mm): For Paddle, Vertical Bug Key, and PC Keying ACC2 Connector (13 Pin DIN): Audio I/O...