Kenwood TS-850S- Manuals
Kenwood TS-850S– User Manual, Manual in PDF format online.
Manuals:
User Manual Kenwood TS-850S
Summary
Thank you for purchasing this new transceiver._____ IMPORTANTPlease read this Instruction Manual carefully before placing the transceiver in service. SAVE THIS INSTRUCTION MANUAL The following explicit definitions apply in this manual: Note ; If disregarded, inconvenience only, no risk of equipment ...
1 . V - ! BEFORE OPERATION TO PREVENT ELECTRIC SHOCK, FIRE AND OTHER INJURY. PLEASE NOTE THE FOLLOWING: Do not place this unit, where it will be exposed to direct sunlight or close to heating appliances. To ensure good ventilation, do not put anything on top of the cabinet and allow at least 15 cm (...
2. SPECIFICATIONS AND ACCESSORIES 2-1. SPECIFICATIONS
3. INSTALLATION AND CONNECTION 3-1. INSTALLATION ■FRONT FEETBy extending the front feet, the front panel can be elevated for operating convenience.Turn the front foot left and pull down.Then turn right to lock. 3-2. CONNECTION The TS-850S requires more than 20.5 A at 13.8 VDC when transmitting at fu...
4. OPERATION 4-1. OPERATING CONTROLS 4-1-1. Front Panel Note All segments on the Display Panel and Indicators are shown on for this explanation. P.10 P.11 P.12 I I: cb HIGH L vox A FULL AlP eOO$T.a □ □ □ □ NOTCH SQL NB LEVEL • PPO SCAN GCDOocoooaaooooocooaocooacxxxic .. .. . rmnn ri»HTtn «OOOyCIOr&g...
tuner will be engaged and the tuner will try to match the antenna. ©PHONES jackOutput terminal for headphones. ©MIC jack Microphone connection. GND (MIC) <D NC 8 V/approx. 10 mA MIC connector (Front view) ©AGO switch This switch selects the operating time constant of the AGO (Automatic Gain Contr...
The standard position is with the control turned fully clockwise. As the control is turned counterclockwise, high frequencies are cut. (§)M.CH/VFO CH control This control is used to select the desired memory channel during Memory Channel Operation.This control is also used to change the frequency in...
ER key to select the desired r function in transmit. ER key ges the tivity. MODE keyPress the CW / FSK key to alternate between CW and FSK. NB switch/control NB 1 : For pulse type noise, such as generated by automotive ignition systems. Noise blanker 2 is used for long duration pulse noise, like th...
MODE keyPress the CW / FSK key to alternate between CW and FSK. RIT/XIT switch/control NOTCH switch/control NB switch/control NB1 : For pulse type noise, such as generated by automotive ignition systems. NB2 : Noise blanker 2 is used for long duration pulse noise, like the “woodpecker”. RF gain cont...
MODE keyPress the LSB/USB key to alternate between LSB and USB. RIT/XIT switch/control SQL(Squelch) control NOTCH switch/control NB switch/control NB1 : For pulse type noise, such as generated by automotive ignition systems. NB2 : Noise blanker 2 is used for long duration pulse noise, like the “wood...
If the transceiver is operated into an antenna with a high SWR, the final stage SWR protection circuit may operate (when SWR is greater than approximately 2 : 1). Use of the Automatic Antenna Tuner will help you to match the antenna to the transceiver. The AT unit is capable of matching a 20 - 150 o...
4-11. MEMORY The transceiver incorporates a convenient 100 channel memory that can be used to store and recall commonly used frequencies. 4-11-1. Microprocessor back-up lithium battery A lithium battery is contained in the transceiver to retain memory. Turning off the POWER switch, disconnecting the...
B. Split Memory Channel C. Programmed Scan Memory Channel 1. Select the receive frequency, the mode and the filter. Example:21.200 MHz is selected on VFO A. 2. Press the A = B key.3. Set the RX VFO to B and select the desired transmit frequency. Example:21.210 MHz is selected on VFO B. 1 1 1 1 11 1 ...
4-11-6. Memory Channel Recall The following procedure illustrates how to recall a memory channel. 1. Select memory channel operation for RX by simply depressing the appropriate FUNCTION key. The display will indicate the frequency of the memory channel you used last. 2. You can select a different me...
NoteIf the CLR key is pressed during recording, the recorded data is erased. 5. When the REC key is released, recording is terminated, and the normal receive mode returns automatically._________________________ NoteIf the available time is used up during recording, recording is terminated, and the n...
4-15. OPERATION WITH A PERSONAL COMPUTER (Requires optional IF- 232C) Control with a personal computer is possible with the optional IF-232C interface. For more information, refer to the manuals provided with the interface. ■Function list • AUTO INFORMATION ON/OFF setting• Same function as microphon...
When two TS-850 are connected together, operation data can be transferred from one TS-850S (master) to the other (slave). 4-18. Transfer function when two TS-850S transceivers are connected together Notes 1. Other functions may be slowed down while the data is being transferred. 2. All operation dat...
4-18-2. Function setting Turn both transceivers on with the function setting (menu number 32) at power on. (Please refer to Section 4-10-15.) 4-18-3. Data that can be transmitted Data that can be transmitted includes the following: VFO frequency, VFO A / B, Filter, Mode (with the TUNE mode). Selecte...
4-19. When used as the master machine for the transverter Notes 1. Be sure to unplug the DC power cable before starting work.2. Advanced skills and knowledge will be needed for this type of operation. Be very careful to make connections exactly as shown. I Preparation Shield cover ICONNECTION When c...
The front panel keys can be operated remotely via the remote control terminal (ACCS) on the rear. The following eleven functions can be remotely controlled. PLAY-1, PLAY-2, PLAY-3, REC-1, REC-2, REC-3, CLR, TF-SET, QUICK M.IN, QUICK MR, VOICE The remote control terminal circuit in the transceiver is...
1 c 1 2 3 4 1 c 5 1 c 6 1 c 7 8 1 c 9 Q 1 2 3 4 8 9 1 0 1 3 1 5 1 6 1 7 1 8 Q 5 6 1 1 1 2 Q 1 9 YM 6 6 ? 1 t f P 0 7 4 H C 3 9 0 G S N 1 6 9 1 3 P A N 7 0 N 0 5 T C 7 S 0 4 F 2 S C 2 7 1 2 ( Y ) 2 S K 5 O 0 (K53) D T C 1 1 4 E K Note Circuit Diagram is subject to change without notice due to advance...
SWITCH UNIT A (X41-31 30-00) A/6 B/6 C N 3 C N 4 C/6 0/6 C N 7 -•rt ill J r S 2 M C H ____ / V F O C H H . C U T L . C U T E / 6 SWITCH UNIT (X41-3140-00)
TRX UNIT (X59-3680-00) AGC UNIT (X59-3820-00) 0 1 5 1 . 1 5 2 : 2 5 A I 2 I 3 ( Y ) 0 1 5 3 , 1 5 4 . 1 5 5 : D T C I I 4 T K SM AMP UNIT (X59-3830-00) 1 C 2 0 1 D T C 1 2 ^ » E K , , a R 2 -- VW- 2 2 0 k o — CNi R 3 5 6 0 k --- WV--- R 6 —wv- 12 0k TI C 1 1 M ---- 1 2 3 ^ ^ 5 6 7 8 9 1 0 1 1 NoteCi...
6. MAINTENANCE AND ADJUSTMENTS 6-1. GENERAL INFORMATION Your transceiver has been factory aligned and tested to specification before shipment. Under normal circumstances the transceiver will operate in accordance with these operating instructions. All adjustable trimmers and coils in your transceive...
7. OPTIONAL ACCESSORIES Be sure to unplug the DC power cable before starting work. 7-1. FILTER INSTALLATION 1. Remove the bottom cover of the transceiver. 2. Remove the screws and the filter cover as shown. o YK-88C-1 or YK-88SN-1 O p.yp i I Tn I I II I-O il I I L<2) o ''■e tf- YK-88CN-1 or YK-88...
7-5. DSP-100 DIGITAL SIGNAL PROCESSOR CONNECTION Connect the cable supplied with the DSP-100. 7-6. TL-922/922A LINEAR AMPLIFIER CONNECTION TL-922/922A CAUTION:-------------------------------------------------Do not connect the power cable unless the TL-922/922A POWER switch is set to the OFF positio...
8. REFERENCE 8-1. ANTENNA INSTALLATION ■Fixed Station For HF fixed-station operation, an antenna specifically designed for amateur operation is recommended. Antenna types include wire antennas, verticals, rotary beams, and other antenna types. (Fig. 8-1) HF antennas are quite large and must be insta...
8-2. RADIO FREQUENCY ALLOCATION kHz 148.5 283.5 1 St 2nd 3rd Zone Zone Zone 525 1606 17051800 2000 23002500 3200340035003800 39003950 40004750 50005060 5950 6200 Low frequency broadcast band WMMMÍ TZTi Ü tl 9500 9900 10000 Medium frequency broadcast band i 160 m amateur band 90 m broadcast band 80 m...
Manual Kenwood TS-850S
Kenwood Manuals
-
Kenwood VR-2080
User Manual
-
Kenwood VR-2080
Manual
-
Kenwood CD-224M
User Manual
-
Kenwood CD-224M
Manual
-
Kenwood HTB-505
User Manual
-
Kenwood VR-2090
User Manual
-
Kenwood VR-2090
Manual
-
Kenwood KR-797
User Manual
-
Kenwood KR-797
Manual
-
Kenwood 1070VR
User Manual
-
Kenwood 1070VR
Manual
-
Kenwood 1080VR
User Manual
-
Kenwood 1080VR
Manual
-
Kenwood 144MHz FM TRANSCEIVER K2E
User Manual
-
Kenwood 25th Anniversary Products XXV-02A
User Manual
-
Kenwood 25th Anniversary Products XXV-03A
User Manual
-
Kenwood 411
User Manual
-
Kenwood 411
Manual
-
Kenwood 5-CHANNEL POWER AMPLIFIER KAC-959
User Manual
-
Kenwood 50 MHZ ALL MODE TRANSCEIVER TS-590S
User Manual