Kenwood LZ-701W- Manuals

Page 2 - English; Contents; Operation

English 2 Contents Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Operation Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Switching the Monitor’s Picture . . . . . . . . . . ....

Page 3 - Safety Precautions; To prevent injury and/or fire, take the following precautions:; NOTE; Reset button

3 Safety Precautions To prevent injury and/or fire, take the following precautions: • Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition or ground wires, make sure to use automotive-grade wires or other wires...

Page 4 - Power; Switching the Monitor’s Picture

English 4 Operation Power Turning on the power Press the V.SEL button. Turning off the power Press the V.SEL button for at least two seconds. Switching the Monitor’s Picture <When the KTC-V800N or KTC-V800P is connected> Each time you press the V.SEL button, the monitor’s picture switches as f...

Page 5 - Adjusting the Picture Quality

5 You cannot operate when the navigation picture is displayed.<When the KTC-V800N or KTC-V800P is connected> Adjusting the Picture Quality Press the SCRN button, the picture quality adjustment screen to be displayed. Each time you press the SCRN button, the adjustment item can be selected.. Pr...

Page 9 - Remote Control Function; Loading and Replacing the Batteries; Monitor Control Function

9 Remote Control Function <Provided with the KTC-V800N/KTC-V800P> Do not set the remote on hot places such as above thedashboard. Loading and Replacing the Batteries 1. Use two "AA" batteries:Slide the cover while pressing downwards to remove it as illustrated. 2. Insert the batteries ...

Page 10 - Installation; Accessories; External view; Installation Procedure; connect it to any other power supply; WARNING

English 10 Installation Accessories External view ......... Number of items ........1 1 ........1 2 ........1 3 External view ......... Number of items ........5 4 ........2 5 (Ø4 x 12 mm) (Ø4 x 16 mm) Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconne...

Page 12 - Installation for Monitor Unit; Installation location and cleaning

English 12 Installation Installation for Monitor Unit Installation location and cleaning Select for installation a location where the stand can be placed completely horizontal orwhere the front edge of the support (petal-shaped part) can be attached horizontally asshown in Figure A . Do not install ...

Page 14 - Installation for the Video Box Unit

English 14 Installation Installation for the Video Box Unit Accessory 5 (Ø4 x 16 mm) IM_W_English_ver.5 02.12.20 1:38 PM Page 14

Page 15 - Connection; Visual input

15 – + TO MONITOR UNIT VIDEO IN VIDEO OUT POWER PRK SW ACC FM TX +12 V 2 AV INPUT AV OUTPUT 1 AV INPUT ANTENNA Connection Accessory 2 Accessory 1 Ignition wire (Red) ª 12V Parking sensor wire (Green) For the sake of safety, be sure to connect theparking sensor. 2 CAUTION Ignition key switch Car fuse...

Page 16 - Troubleshooting Guide; SOLUTION

English 16 Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result ofslight misoperation or miswiring. Before calling service, first check thefollowing table for possible problems. SOLUTION POSSIBLE CAUSE PROBLEM Nothing happens when thebuttons are pressed. Th...

Page 17 - Specifications; Specifications subject to change without notice.

17 Specifications Specifications subject to change without notice. Monitor Unit Screen size ....................................................................................7.0 inches wide 154.1(W) x 87.05(H) x 177(Diagonal) mm 6-1/16(W) x 3-7/16(H) inch Display system ..............................