Kenwood KTC-H2A1- Manuals

Finding a location for the antenna Installation in a home with the KPA-H2H kit (available separately) Note: Do not put Here 2 Anywhere in the docking station until you have completed the installation. Installation in a home with the KPA-H2H kit (continued) 11 Mounting the antenna (continued) Here 2 ...

Finding a location for the antenna (continued) Use this map as a general placement guideline—some experimentation may be needed to obtain the best reception in your particu- lar situation. See pg. 33, Antenna Signal, for more information about using the ANTENNA SIGNAL screen to aim the antenna. 13 H...

17 16 Basic operation Af ter you have activated your SIRIUS subscription, the Normal Operation screen will appear ( top right ): Use the up & down arrow buttons to select streams• The selected stream will automatically playThe name and ar tist of the currently-playing song will scroll across the...

19 4. If you decide not to select another stream, press the POWER button on the front panel to exit the mode. The display will rever t to the Normal Operation screen for the active stream. • You can switch to the previously-selected stream by holding the SELECT button for at least 1 second. Holding ...

Here 2 Anywhere Instruction Manual (ver. 2) 21 • Af ter you make your selection, the display will rever t to the Normal Operation screen Note: In the Stream List, Artist List and Song List modes, if you don’t want to make a selection, press the POWER button on the front panel to exit the mode and re...

23 22 the list of saved songs until the one you want is highlighted. 3. Press and release the SELECT button. An “S” will appear next to the song’s name (see bottom of previous page).4. When one (or more) of the selected songs is playing on any stream, the following will happen: a. A ‘beep’ will soun...

Clock Setup Here 2 Anywhere has an automatic clock that receives its time signal as par t of the SIRIUS satellite stream.To set the clock, you need to tell Here 2 Anywhere what time zone you live in and if your local area observes Daylight Savings Time.1. While in the Setup Mode, press the lef t or ...

7. Use the up and down arrow buttons to move through the streams until the one you want is highlighted. 8. Press the SELECT button to save your setting. The Alarm Setup screen will reappear.Press the POWER button on the front panel to exit the Setup Mode. Using the alarm At the specified time (see a...

amount of time you want Here 2 Anywhere to play before it shuts off. 4. Press the SELECT button to confirm your selection and activate the Sleep Timer.When the Sleep Timer is active, the display will return to the Normal Operation screen.• The display will appear as normal except that ever y three s...

reappears. Repeat Steps 3 – 4. 5. Using the preset 1 – 6 buttons, enter your new 4-digit code. The screen’s second line will change from “_ _ _ _” to “* * * *”. 6. Press the MEMORY button. The Confirm Number screen appears ( right ). 7. Re-enter your new 4-digit code. The screen’s second line will c...

1. While in the Setup Mode, press the left or right arrow button until the Audible Alert screen appears ( right ): 2. Use the up & down arrow buttons to turn the audible aler t ‘beep’ on or off. Antenna Signal This screen shows the quality of the SIRIUS satellite signal that’s being received, to...

Troubleshooting guide (continued) Here 2 Anywhere Instruction Manual (ver. 2) 35 Troubleshooting guide Here 2 Anywhere Instruction Manual (ver. 2) 34 Problem Possible Cause Solution No power on Here 2 Anywhere (power indicator /display not illuminated) Power supply/cigarette lighter adapter not prop...