Kenwood KDC-MP3046 - Manuals

English | 5 Playing Music Playing Disc Insert a disc into the disc slot.When inserted, the source is switched automatically and a song starts playing. Folder select Pressing the [BAND] button switches a folder. Song select Pressing the [ 4 ] or [ ¢ ] button selects a song (track or file).Fast revers...

6 | KDC-MP246/ KDC-MP146/ KDC-MP3046/ KDC-MP2046/ KDC-MP1046 General Removing the Faceplate The faceplate of the unit can be detached and taken   with you, helping to deter theft. Detach the faceplate Press the Release button. Reattaching the Faceplate Refer to the following diagram when reattaching...

English | 7 Display Indicator q r p 1 “ST“ indicator: Lights when a stereo broadcast is received. 2 “IN“ indicator: Lights when a disc is in the unit. 3 “ “ indicator: Shows the image indicating the operating state of each source or the setting of Audio Control. Text Display Selection Changing displ...

8 | KDC-MP246/ KDC-MP146/ KDC-MP3046/ KDC-MP2046/ KDC-MP1046 Function Setting Perform configuration for this unit. You can set up the following functions. 1 Select a source Press the [SRC] button. Items to be displayed vary depending on the selected source. Refer to the function list shown later. 2 ...

English | 9 Informs you by sound that you forgot to detach the faceplate when ACC is set to OFF. Î Built in AUX: “BUILTIN AUX” ➤ “ON1”*,”ON2”,”OFF”When this is set to ON, AUX source can be selected.ON1: Outputs the sound of external unit connected to the AUX terminal when switched to AUX source. ON2...

10 | KDC-MP246/ KDC-MP146/ KDC-MP3046/ KDC-MP2046/ KDC-MP1046 Supplementing is optimized by compression format (MP3 or WMA) and processed according to bit rate.The ef fect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.Can be set whil...

12 | KDC-MP246/ KDC-MP146/ KDC-MP3046/ KDC-MP2046/ KDC-MP1046 Music Disc/Audio File Operation Play Function Repeat play Press the [4] button. Switches between Track Repeat (“ TRAC REPEAT ”) and OFF (“REPEAT OFF”) when pressed while playing a CD.Switches between File Repeat (“FILE REPEAT ”), Folder R...

English | 13 Tuner Operation Frequency Step Setting Changing the tuning frequency step.The original setting is FM band 50 kHz, MW band 9 kHz. 1 Turn the power OFF Press the [SRC] button for at least 1 second. 2 Switch the frequency step While pressing the [1] and [5] buttons, press the [SRC] button....

14 | KDC-MP246/ KDC-MP146/ KDC-MP3046/ KDC-MP2046/ KDC-MP1046 Basic Operations of Remote Control ATT 0 — 9 SRC VOL FM+ AM– EXIT / O AUD ENT DIRECT General Control Volume control: [VOL] Source select: [SRC] Volume reduce: [ATT] When the button is pressed again, the volume returns to the previous leve...

English | 15 Appendix About Audio file • Playable Audio file MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name.Although the audio files are complied with the standards listed above, the play maybe impossible dependi...

16 | KDC-MP246/ KDC-MP146/ KDC-MP3046/ KDC-MP2046/ KDC-MP1046 Accessories/Installation Procedure Accessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper...

English | 17 Connecting Wires to Terminals P.CONT ANT. CONT MUTE REMOTE CONT STEERING WHEEL REMOTE INPUT L R Battery Ground wire (Black) - ( To car chassis) FM/AM antenna input Fuse (10A) Wiring harness(Accessory 1 ) Ignition wire (Red) Battery wire ( Yellow) ACC Car fuse box If no connections are m...

18 | KDC-MP246/ KDC-MP146/ KDC-MP3046/ KDC-MP2046/ KDC-MP1046 Installation/Removing the Unit Non-Japanese Cars Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it ma...

English | 19 Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer. • Cannot set up the low pass filter. • No output from the subwoofer. ▲ • <Subwoofer output> of <Function Setting> (page 8) is not set to On....

20 | KDC-MP246/ KDC-MP146/ KDC-MP3046/ KDC-MP2046/ KDC-MP1046 Specifications subject to change without notice. FM tuner section Frequency range 200 kHz space : 87.9 MHz – 107.9 MHz 50 kHz space : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 11.2dBf (1 μV/75 Ω) Quieting Sensitivity (DIN S/N...