Kenwood KDC-D300- Manuals

Page 2 - Contents; English; Before use

Contents — 2 — English Before use Safety Precautions ........................................................................3Handling Compact Discs ...............................................................5 Operations Buttons and Display ..........................................................

Page 3 - WARNING; Safety precautions; IMPORTANT INFORMATION; CAUTION

— 3 — To prevent injury or fire, take thefollowing precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out ofplace when jolted. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metaltools) inside the unit. • If...

Page 4 - Cleaning the Faceplate Terminals; Cleaning the CD Slot

— 4 — English Safety precautions Cleaning the Faceplate Terminals If the terminals on the unit or faceplate getdirty, wipe them with a dry, soft cloth. Cleaning the Unit If the front panel gets dirty, turn off thepower and wipe the panel with a dry siliconcloth or soft cloth. Do not wipe the panel w...

Page 5 - Handling Compact discs; Tape

— 5 — Handling Compact discs Playing a CD that is dirty, scratchedor warped can cause the sound toskip and the unit to operateincorrectly, resulting in worsenedsound quality. Take the followingprecautions to prevent your CDs fromgetting scratched or damaged. Handling CDs • Do not touch the recorded ...

Page 6 - Operations; Buttons and Display; A press of the release button causes the faceplate to; Playing CDs; Release button

— 6 — English Operations INTEGRATED QUAD 1 BIT D/A CONVERTER KDC-D300 CD PLAYER DIGITAL OPTIMUM SERVO CONTROL 11BAND11BAND SPECTRUM ANALYZER 60 120 250 380 500 750 1k 2k 4k 8k 16k DPAC DISP MENU Buttons and Display The various CD operations are performed with the Centre unit.For information about th...

Page 7 - Switching Spectrum Analyzer Display; Presetting Disc Names

— 7 — You can select the display to enjoy sounds with eyes. Operation for "N" Setting: Each time you press the DISP button, the spectrum analyzerdisplay switches as following table; Operation for "O" Setting: Selecting CD play source mode. Each time you press the DISP button, the spe...

Page 8 - Display Level Adjustment; You can adjust the spectrum analyzer level.; Eject; Theft Deterrent Faceplate

— 8 — English Operations Display Level Adjustment You can adjust the spectrum analyzer level. Selecting CD play source mode. Press the DISP button for at least one second. Press either the ¢ or 4 button on the centre unit. Press the ¢ button:Level increased. Press the 4 button:Level decreased. (by 1...

Page 9 - Reattaching Faceplate:; Accessories; External view; Shaft

Reattaching Faceplate: Hold the faceplate so that theoperation face faces the fronttoward you and press until itlocks. The faceplate will be setand the unit will be operational. When there is difficulty in settingthe faceplate, align the depressionon the left side of the faceplatewith the shaft of t...

Page 10 - Installation Procedure; White; Accessory

— 10 — English The O-N switch should be set according to the Centre unit in useas well as to the connected models. When the centre unit is compatible with the "N"-operation, setthe O-N switch to "N". When it is not compatible with the "N"-operation, set the O-N switch to "...

Page 11 - Installation; Use the spacer

— 11 — Metal mounting strap (commercially available) Self-tappingscrew (commerciallyavailable) Firewall or metal support Accessory 2 Installation ■ Installation Bend the tabs of themounting sleeve witha screwdriver orsimilar utensil andattach it in place. UP 7 UP 3 On cars where there is no compartm...

Page 12 - Removing the Unit; Be careful to avoid injury from the catch pins on the removal tool.; Remove the Hex-head screw with integral washer (M4; Removing the hard rubber frame

— 12 — English When the lower level is removed, remove the upper twolocations. 2 The frame can be removed from the top side in the samemanner. NOTE Catch Lock Engage the catch pins on the removal tool and remove the twolocks on the lower level.Lower the frame and pull it forward as shown in the figu...

Page 13 - Troubleshooting Guide

— 13 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Beforecalling service, first check the following table for possible problems. SOLUTION POSSIBLE CAUSE PROBLEM No sound can be heard, or thevolume is low. The fader or balance settings ...