Kenwood KDC-8020 - Manuals

— 5 — About CDs Handling CDs • Don’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RWafter reading the caution items on thepackage etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it. When using ...

Press the [SRC] button. Source required Display Tuner "TUNER" CD "CD" External disc "DISC"/"CD2" Auxiliary input "AUX" Standby (Illumination only mode) "ALL OFF" For Auxiliary input one of the below optional accessories isnecessary. - KCA-S210A- CA-C1A...

Switching the displayed information. Press the [CLK] button. Each time the button is pressed it switches between clockdisplay and current source.During clock display the clock indicator is ON. Switching Clock Display Switching the information displayed. Press the [DISP] button. Each time the button ...

Fine-tuning so that the System Q value is optimal when settingthe speaker type. Speaker Setting switch as shown below. 4 Adjust the Audio item Press the [ 4 ] or [ ¢ ] button. Adjustment Item Display Range Bass Center Frequency "Bass F" 60/70/80/100 or 150 Hz Bass level "Bass" –8 — +...

4 Select the character type Press the [ 38 ] button. Each time the button is pressed the character type switches asshown below. Character type Alphabet upper caseAlphabet lower caseNumbers and symbolsSpecial characters (Accent characters) 5 Select the characters Press the [FM] or [AM] button. Charac...

The faceplate of the unit can be detached and taken with you,helping to deter theft. Removing the Faceplate 1 Turn the ignition OFF or press the [SRC] button for at least 1second. The power turns OFF and the faceplate slides open. 2 Holding the center part of the faceplate pull it out. • When the fa...

Tuner features Prevents tampering with the unit while your car is being servicedetc. Hiding the control panel Press the [SRC] button for at least 1 second. The faceplate slides open.When the time set in <OFF Wait Time Setting> (page 19) lapses,the faceplate is hidden and the power turns OFF. S...

Putting the station in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4 ] or [ ¢ ] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for at least 2 seconds. The preset number display blinks 1 time.On each band...

CD/External disc control features Changing the tuning frequency step.The original setting is FM band 50 kHz, and AM band 9 kHz. While pressing the [#1] and [#5] button, press the Resetbutton. The frequency step changes to FM band 200 kHz, and AM band10 kHz. • When the same operation is repeated, it ...

Selecting the song you want to hear. Press the [ 4 ] or [ ¢ ] button. Track Search Fast Forwarding Hold down on the [ ¢ ] button. Release your finger to play the disc at that point. Reversing Hold down on the [ 4 ] button. Release your finger to play the disc at that point. Fast Forwarding and Rever...

Playing the first part of each song on the disc you are listeningto and searching for the song you want to listen to. 1 Start Track Scan Press the [SCAN] button. "Scan ON" is displayed. 2 Release it when the song you want to listen to is played Press the [SCAN] button. Track Scan Replaying t...

Selecting the CD displayed in the DNPS of the CDs set in theDisc changer. 1 Enter DNPP mode Press the [DNPP] button on the remote. When "DNPP" is displayed the DNPS display in order. Forward / Reverse display Press the [DISC–] or [DISC+] button. 2 When the disc you want is displayed Press th...

Setting during operation beep sound etc. functions.The Menu system basic operation method is explained here. Thereference for the Menu items and their setting content is afterthis operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 S...

Setting the operation check sound (beep sound) ON/OFF. Display Setting "Beep ON" Beep is heard. "Beep OFF" Beep canceled. Touch Sensor Tone If you enter a Code different from your Security Code, you have tostart over from step 4. Press the Reset button and when it's removed from theb...

Setting the displayed text scroll. Display Setting "Scroll Auto" Repeats scroll. "Scroll MANU" Scrolls when the display changes. The text scrolled is shown below. • CD text• MD title Text Scroll <In External disc control mode> Temporarily have reception switched from stereo to ...

[VOL.] buttons Adjusting the volume. [SRC] button Each time the button is pressed the source switches.For the source switching order refer to <Selecting the Source>(page 6). [ATT] button Turning the volume down quickly.When it is pressed again it returns to the previous level. Basic operations...

[ 4 ]/ [ ¢ ] buttons Doing track forward and backward. [DISC+]/ [DISC–] buttons Doing album forward and backward. [ 38 ] button Each time the button is pressed the song pauses and plays. [DNPP]/ [OK] button Enters and cancels the <DNPP (Disc Name Preset Play)> (page16) mode. [#0] — [#9] button...

— 23 — Do not use any accessories other than those provided with your unit. Ifyou use other accessories, you may damage the unit. 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Conne...

English — 24 — EXT.CONT. ANT. CONT ILLUMI P.CONT FRONT • L FRONT • R REAR • L REAR • R – + FRONT REAR FM/AM antenna input 15 10 Rear left output (White) 11 Rear right output (Red) Fuse (10A) 27 Wiring harness (Accessory 1 ) 22 28 White/Black 31 Gray/Black 34 Green/Black 37 Purple/Black White 30 Gray...

English — 26 — 1 Insert the removal tool into theindentations in the hard rubberframe, and pull it gently until thelock is released. Accessory 8 Removal tool 3 Refer to the section "Removing the faceplate" (page 10) and thenreattaching the faceplate. Never insert the taptite screws (ø2 X 4 m...

— 27 — What might seem to be a malfunction in your unit mayjust be the result of slight misoperation or miswiring.Before calling service, first check the following tablefor possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown. ☞ After checking for short circuits in the wi...

English — 28 — ? The desired frequency can’t be entered with the Direct AccessTuning. 41 ✔ A station that can’t be received is being entered. ☞ Enter a station that can be received. ✔ You’re trying to enter a frequency with a 0.01 MHz unit. 42 ☞ What can be designated in the FM band is to 0.1 MHz. D...

English — 30 — Specifications FM tuner section Frequency range (200 kHz space) ............87.9 MHz – 107.9 MHz (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 30dB) .................... 9.3dBf (0.8 µV/75 Ω ) Quieting Sensitivity (S/N = 50dB) ............... 15.2dBf (1.6 ...