Kenwood KDC-2031SA/G- Manuals

Page 2 - English; Contents

2 | English Contents Safety precautions 3 Notes 4 About CDs 5 General features 6 PowerSelecting the SourceVolumeAttenuatorSystem QAudio ControlAudio SetupSpeaker SettingClock DisplayAdjusting ClockDimmer ControlDSI (Disabled System Indicator)Theft Deterrent FaceplateTEL Mute Tuner features 10 Tuning...

Page 3 - Safety precautions; Lens Fogging; WARNING

English | 3 Safety precautions Do Not Load 8 cm (3 in.) CDs in the CD slot If you try to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may for...

Page 4 - Notes; • If you experience problems during installation,; Cleaning the Unit; Cleaning the Faceplate Terminals; Reset button

4 | English Notes • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. • The illustrations of the display and the panel appearing in this ...

Page 5 - About CDs

English | 5 Handling CDs • Don’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it. When using a ...

Page 6 - General features; Power; Turning ON the Power; Selecting the Source; Source required; Display; Volume; Increasing Volume; Attenuator; Turning the volume down quickly.

6 | English General features Power Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source Press the [SRC] button. Source required Display Tuner "TUnE" CD "CD" Standby (Illumination only mode) "STBY"...

Page 7 - System Q; Audio Control

English | 7 System Q You can recall the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. Each time the button is pressed, the sound setting switches. Sound setting Display Natural "FLAT" R...

Page 8 - Speaker Setting; Speaker type; OFF; Clock Display; The clock display blinks.; Push the Control knob to [; Dimmer Control; You can change the unit's display to dimmer.; Theft Deterrent Faceplate; Removing the Faceplate

8 | English General features Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "STBY" display. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Speaker type Turn the [VOL] knob. E...

Page 9 - TEL Mute; When a call comes in; Projections; Push the faceplate in until it clicks.

English | 9 TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed.The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the ca...

Page 10 - Tuner features; Tuning Mode; Choose the tuning mode.; Press the control knob.; Auto seek; Tuning; Selecting the station.; Select tuner source; Monaural Reception

10 | English Tuner features Tuning Mode Choose the tuning mode. Press the control knob. Each time the knob is pressed, the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" indicator Automatic search for a station. Preset station seek "AUTO 2" indi...

Page 11 - Station Preset Memory; Putting the station in the memory.; Auto Memory Entry; Press the Control knob for at least 2 seconds.; Preset Tuning; Calling up the stations in the memory.

English | 11 Station Preset Memory Putting the station in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob to [ 4 ] or [ ¢ ]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seco...

Page 12 - CD player features; Playing CD; When a disc is inserted; Fast Forwarding and Reversing; Fast Forwarding; Reversing; Release your finger to play the disc at that point.; Track Search; Selecting the song you want to hear.

12 | English CD player features Playing CD When a disc is inserted Press the [SRC] button. Select the "CD" display. • When a CD is inserted, the "IN" indicator is ON. Pause and play Press the control knob. Each time the knob is pressed, it pauses and plays. Eject the CD Press the [ 0...

Page 13 - Track Repeat; Replaying the song you’re listening to.; Scan Play; Start Scan Play; Random Play; Playing all the songs on the disc in random order.

English | 13 Track Repeat Replaying the song you’re listening to. Press the [REP] button. Each time the button is pressed, the Track Repeat turns ON and OFF.When it's ON, the "REP" indicator is ON. Scan Play Playing the first part of each song on the disc you are listening to and searching f...

Page 14 - Accessories/ Installation Procedure; Accessories

• If your vehicle’s ignition does not have an ACC position, or if the ignition wire is connected to a power source with constant voltage such as a battery wire, the power will not be linked with the ignition (i.e., it will not turn on and off along with the ignition). If you want to link the unit’s ...

Page 15 - Connecting Wires to Terminals

English | 15 Connecting Wires to Terminals 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 P.CONT ANT.CONT REAR L R MUTE Rear right output (Red) Rear left output ( White) Battery wire ( Yellow) Ignition wire (Red) FM/AM antenna input Antenna Cord (ISO) Antenna Conversion Adaptor (ISO–JASO) (Accessory 3 ) Wiring har...

Page 16 - Connector Function Guide

16 | English Connecting Wires to Terminals Connector Function Guide Pin Numbers for ISO Connectors Cable Colour Functions External Power ConnectorA-4 Yellow Battery A-5 Blue/White Power Control A-7 Red Ignition (ACC) A-8 Black Earth (Ground) Connection Speaker ConnectorB-1 Purple Rear Right (+) B-2 ...

Page 17 - Installation

English | 17 Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). Installation Firewall or metal support Screw (M4X8)(commercially available) Self-tapping screw (commercially available) Metal mounting st...

Page 18 - Removing the Unit; Removing the hard rubber frame

18 | English Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level.Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed, remove the lower two locations. • The frame can be remo...

Page 19 - Troubleshooting Guide; General

English | 19 Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. ✔ The fuse has blown. ☞ After checking ...

Page 20 - Disc source

20 | English Disc source ? The specified disc does not play, but another one plays instead. ✔ The specified CD is quite dirty. ☞ Clean the CD. ✔ The disc is severely scratched. ☞ Tr y another disc instead. ? A CD ejects as soon as it is loaded. ✔ The CD is quite dirty. ☞ Clean the CD, referring to t...

Page 21 - Specifications

English | 21 FM tuner section Frequency range (50 kHz space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 µV /75 Ω) Quieting Sensitivity (S/N = 46dB) : 1.6 µV /75 Ω Frequency response (±3.0 dB) : 30 Hz – 15 kHz Signal to Noise ratio (MONO) : 65 dB Selectivity (DIN) (±400 kHz) : ≥ 80 ...