Kenwood KCA-R42FM - Manuals

— 5 — C D M D A U T O C H A N G E R C O N T R O L L E R REP RDM 3 - + 4 ¢ PWR M . R D M D . R E P T R A C K D I S C 8 / D . S C N M H z DISC T R A C K FREQ LEVEL Playing CDs/MDs : Press the PWR button.The power goes ON and the CD/MD play start. When the unitreceives any signal from the remote contro...

— 6 — English Using the remote control, make direct input of the tracknumber that you want to listen to. Using the number buttons on the remote control, enter thenumber of the track that you want to listen to.The selected track number blinks in the display for 10 seconds.If you make no further input...

— 7 — Using the remote control, make direct input of the disc numberthat you want to listen to. Using the number buttons on the remote control, enter thenumber of the disc that you want to listen to.The selected disc number blinks in the display for 10 seconds.If you make no further input in the 10-...

— 8 — English Play the tracks on all the discs in the disc changer in randomorder. Press the M.RDM button to switch the magazine random playfunction on and off.The M.RDM indicator lights up when the magazine random playfunction is turned on.The display of the disc and track numbers change continuous...

— 9 — To set the frequency change mode Hold down the REP button for more than three seconds. TheFREQ indicator will light up and the currently set frequency willbe displayed. • The initial value is 88.3MHz.• If this function is on, the functions other than power on / off, reset, and modulation level...

— 10 — English Dynamic control The unit comes with the prevention of distortion function toreduce sound distortion.If the sound is distorted severely, press the + button on the display unit and then set the function to "2" (ON). If theprevention of distortion function is set to "2" (...

— 11 — Accessories External view ......... Number of items .........1 2 .........2 1 The use of any accessories except for those provided might resultin damage to the unit. Make sure only to use the accessoriesshipped with the unit, as shown above. 2 CAUTION .........1 3 1. To prevent a short circui...

— 12 — English C D M D A U T O C H A N G E R C O N T R O L L E R REP RDM 3 - + 4 ¢ PWR M . R D M D . R E P T R A C K D I S C 8 / D . S C N M H z DISC T R A C K FREQ LEVEL To prevent fire when the ignition wire (Red) or battery wire(Yellow) is short-circuited by coming into contact with thevehicle ch...

— 13 — Installation Installation of Display unit ■ • Installation without using the trim mount plate 3 Attach one velcro to theslanted-line of the the displayunits as shown above, andattach the other velcro to theparts where you wish toattach the display units.Then, put velcros togetherand install t...

— 14 — English Troubleshooting guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Beforecalling service, first check the following table for possible problems. SOLUTION POSSIBLE CAUSE PROBLEM Power button is not turned ON. Turn the powe...

— 16 — English Specifications subject to change without notice. Specifications Modulating Frequency (200KHz STEP) ............87.7, 87.9, 88.1, 88.3, 88.5, 88.7, 88.9, 89.1,89.3, 89.5, 89.7, 89.9 , MHz General Operating Voltage ................................................14.4 V (11 ~ 16 V)Curren...