Kenwood eXcelon KAC-X621- Manuals

Page 2 - English; Safety precautions; WARNING; NOTE; Display

2 English Safety precautions 2 WARNING To prevent injury or fire, take the following precautions: • When extending the ignition, battery, or ground wires, make sure to use automotive-grade wires or other wires with a 8 mm² (AWG 8) or more to prevent wire deterioration and damage to the wire coating....

Page 3 - Installation; Accessories; Part name; Installation procedure

English 3 �� ...

Page 4 - Connection; Bridged Connections

4 English �� Connection CENTER UNIT (CD receiver, etc.) RCA cable ground terminal RCA cable* Lead terminal* Left speaker Right speaker  Bridged Connections Speaker (Bridged) Battery Ground wire* Battery wire* Protect...

Page 5 - Controls; • Stereo Connections:

English 5 Controls 1 Fuse (KAC-X621/PS621 : 25 A × 3 , KAC-X521/PS521 : 30 A × 2) 2 Battery terminal 3 Ground terminal 4 Power control terminal Controls the unit ON/OFF. NOTE Controls the unit power. Be sure to connect it with all the systems. 5 Speaker output terminals • Stereo Connections: When yo...

Page 6 - Display mode; Separate Amp Control; Default; Display Demonstration; Press any button to cancel the Demonstration mode.; Amplifier Control System

6 English �� ...

Page 7 - Control an Amp from Center Unit; Operate the desired set item with the Center Unit.; Set an amp’s ID number on the Center Unit.; Messages that may be displayed on the Center Unit

English 7 Control an Amp from Center Unit You can control the sound by controlling amplifiers from the Center Unit. 1 Enter AMP Control mode Select the AMP Control mode by following the 'AMP Control' procedure given on the Operation Manual of the Center Unit. NOTE Use the set item and value operatio...

Page 8 - System examples; Principle of Tri-mode

8 English � � � � � � � � � � � � � � � � � � � � � � �� ...

Page 9 - Troubleshooting Guide; PROBLEM; Specifications; Specifications subject to change without notice.

English 9 Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM POSSIBLE CAUSE SOLUTION No sound. (No sound from one side.) (Blown fus...