Kenwood DVD NAVIGATION SYSTEM KNA-DV3200- Manuals

English 5 Starting Up Navigation Start up navigation and display the map of the area around your vehicle. 1 Turn on the car engine. The Opening screen appears, followed by the CAUTION screen. 2 Read CAUTION carefully, and select . The Current Position screen appears. • The switches displayed on the ...

Language Selection You can change the language of the menu and the voice guidance. 1 Select . 2 Select (Language). 3 Select your preferred language from the list. : Displays up to five previous items.: Displays the previous item.: Displays the next item.: Displays up to five of the next items. • The...

English 7 Markers (and Controls) Displayed on Maps <Current Position screen> <Scroll screen> Scroll the map Screens Before Setting Route Select the screen (5 seconds) Screens During Route Guidance 1 Time display Displays the current time. 2 GPS (Global Positioning System) marker Shows th...

8 English English is displayed only when KNA-TM320 (optional) is connected. Destination Entry Address page 14 Point of Interest page 16 Select from Map page 17 Postcode page 21 Memory Point page 15 Previous Destination page 17 Junction page 20 Motorway Ent/Exit page 18 Coordinates page 19 Stored Loc...

English 9 Map Operations Either the direction in which you are headed or north can be shown as upwards on the map. 1 Select or . Selecting rotates the map to so that direction you are heading is always shown as upwards on the screen (the red arrow indicatesNorth): Selecting rotates the map to so tha...

You can increase or decrease the scale of the map. 1 Select or to change the map scale. Selecting or changes the scale of the map as shown left. • You can keep selecting or to continually change the map scale. • By touching the right of the scale bar after or is selected, you can directly change bet...

English 11 Setting Destination by Scrolling the Map You can set the destination or way point if the exact address not known. 1 Touch the screen to scroll the map until is at the destination point or way point. 2 Select (Destination or Way Point). 3 Select (Destination). Route calculation will be car...

12 English English Set Route ■ Selecting route When the destination set, it is simultaneously calculated for three types of route (Quick, Normal,and Short). You can select the route used actually out of them. 1 Select . The calculation route can be selected from one of three typesnamely, Quick (the ...

English 13 Setting Destination from the Navigation Menu You can set the destination using various ways provided by the system. 1 Select . 2 Select (Destination Entry). 3 Select the item you want. (Address)* see page 14 (Point of Interest)* see page 16 (Select from Map) see page 17 (Postcode)* see pa...

14 English English Set Route ■ Address 1 Enter the street name. If the some letters of a street name are entered, the desired streetcan then be selected from the displayed list. : Selecting this deletes the character that was last entered. Selecting it continuously deletes all the characters that ha...

English 15 ■ Memory Point If you have stored a memory point, you can make it the destination. 1 Select the category for the desired memory point. 2 Select the desired Memory Point. : Displays up to five previous suggestions.: Displays the previous suggestions.: Displays the next suggestions.: Displa...

■ Home/Stored Destination If you have already stored your home address, you can set this as your destination. Similarly, ifdestinations are stored in advance, they can be selected as the current destination in a one-touchoperation. 1 Select (Home) or destinations through . The map for the area aroun...

English 17 ■ Previous Destination This lets you choose one of the most recent 100 destinations or way points and make it yournew destination. 1 Select the Previous Destination from the list. : Displays up to five previous suggestions.: Displays the previous suggestions.: Displays the next suggestion...

18 English English Set Route ■ Motorway Entrance/Exit You can find the name of a motorway entrance or exit from those listed and make it yourdestination or way point. 1 Enter the name of the motorway and select . 2 Select the name of the motorway you want. : Displays up to five previous suggestions....

English 19 ■ Coordinates This function allows destinations to be set using latitude and longitude. 1 Enter the latitude. This can be done using the number keys in combination with [°](degrees), [‘] (minutes), and [“] (seconds). 2 Enter the longitude. : Switches over to north latitude.: Switches over...

20 English English Set Route ■ Junction Designate the junction with 2 street names, and search for the place you want. 1 Enter the 1st street, and select . 2 Select the street you want from the list . : Displays up to five previous suggestions.: Displays the previous suggestions.: Displays the next ...

English 21 ■ Postcode This finds a location by its postcode and makes it the destination. 1 Enter the postcode and select through . To set your destination, see page 17. : This deletes the last character entered. Selecting it continuously deletes all of the characters entered. If a number of candida...

22 English English Route Guidance While driving along during route guidance, the directions for the next junction where you have toturn are shown as a Turn Arrow or Turn List. 1 Select (Screen configuration). 2 Select either (Turn Arrow) or (Turn List). If no items are to be selected, the screen can...

English 23 It is possible to perform two-screen display of maps. 1 Select (Screen configuration). 2 Select (Dual map). If you wish to return to one-screen display, select (Single map). If no items are to be selected, the screen can be closed by selecting . If you wish to modify the display selection...

24 English English Route Options During route guidance you can change the route options, stop or check the route. 1 Select . 2 Select (Route Options). The Route Options screen appears. (Search conditn): Set the method for route calculation between locations. (see page25) (Detour): This calculates an...

English 25 Search Condition You can set the conditions and the mobile navigation system calculates a route. 1 You can select , , or to reach the next way point/destination from the current position. : The route with the quickest time will be used.: The standard route will be used. (You can only sele...

26 English English Route Options Route Preferences The function allows settings to be made for the roads to be used and to start route calculation. 1 Each time a button is selected it will toggle between usageand non-usage of the corresponding roads or ferries. 2 Select . • can be selected during ro...

English 27 ■ Modification of Destination or Way Point Positions This function allows the calculated route will be displayed and the positions of the destination orway points to be modified. 1 Select . 2 Select (Change Location). 3 Select the button for the location to be modified. The map for the ar...

28 English English Route Options ■ Deletion of Destination or Way Points The destination or any way point which has been set may be deleted using this function. 1 Select . 2 Select the button corresponding to the destination orway point to be deleted. 3 Select when the confirmation message is displa...

English 29 Display Route Use this function to display the entire calculated route. 1 Select . The Entire Route screen appears. : You can set any areas you want to avoid from the list ofstreet names. : Recalculates the route. If the data for the route cannot be shown on one screen, you canscroll usin...

30 English English Route Options ■ Setting the conditions for simulation run 1 Select . EDIT ROUTE PREVIEW screen apppears. : Stops at the destination or the next way point. : Stops at a point of interest which has been setup on the route. : Delete the POI which has been selected. POIs: Displays the...

English 31 Navigation Set Up You can alter the map display conditions, the route guidance conditions and show the systeminformation. 1 Select . 2 Select (Navigation Set Up). The NAVIGATION SET UP screen appears. Select a setting button while changing the screen using or . (User Settings): Allows you...

32 English English Navigation Set Up User Setting You can change the settings for the screen display and sound. 1 Select the desired item. Select a setting button while changing the screen using or . Distance: Units for distance can be selected as or . Notify traffic restriction: The display of warn...

English 33 Quick POI Selection This function allows you to set the categories on that are displayed when the (Point of Interest)menu is selected the map. Quick POI enables you to store up to six different kinds of category whichyou use most regularly. (see page 48 to display markers on the map and s...

English 35 Calibration This function allows you to correct any error in the position or direction of your vehicle display. ■ Adjusting Current Position and Direction 1 Select . 2 Move to the correct position and select . 3 Use or to adjust direction in which you are heading, and select . ■ Distance ...

36 English English Navigation Set Up ■ Vehicle Signal This function allows vehicle and GPS satellite data to be displayed. 1 Select . VEHICLE SIGNAL screen appears. ■ Map Version This function enables you to check the version of the map disc you are currently using. 1 Select . The version of the map...

English 37 Set Clock The current time is set using this function. Since time notification is provided by a GPS satellite,time-zone adjustment can be carried out automatically. 1 Select if you would prefer 24-hour display; for 12-hour display. 2 Select to move the setting ahead by one hour, and simil...

38 English English Stored Locations You can store, edit, or delete any destinations, way points, or marked point. 1 Select . 2 Select (Stored Locations). 3 Select the item you want. (Memory Points): Places a marker on the map. (see page 39) (Avoid Area): Stores any areas to be avoided. (see page 43)...

English 39 Memory Points ■ Memory Point Storage Memory points can be classified into one of four categories for storage. 1 Select the category for storage of the memory point. 2 Select . 3 Set a memory point using your preferred method. Up to 100 memory points can be stored. You must delete a memory...

■ Memory Point Confirmation and Modification This function allows stored memory points to be displayed in list form and allows names, icons,telephone numbers, and the like to be modified. 1 Select the category of the memory point to be modified. 2 Select . 3 Select the memory point to be modified. (...

42 English English Stored Locations ■ Memory Point Deletion Stored memory points can be deleted using this function. 1 Select the category of the memory point to be deleted. 2 Select . 3 Select the memory point to be deleted. 4 Select when the confirmation message is displayed. Select to cancel the ...

English 43 ■ Category Name Modification The category names — Personal, Business, Entertainment, and Market Point — can be changed ifso required. 1 Select the category whose name is to be changed. 2 Select . 3 Erase letters using , enter the new letters, and then select . Avoid Area ■ Avoid Area Stor...

Stored Locations 44 English English ■ Avoid Area Confirmation and Modification This function allows stored avoid areas to be displayed in list form and allows them to bemodified. 1 Select . 2 Select the avoid area to be modified. 3 Select the button corresponding to the item to bemodified. For detai...

English 45 Previous Destination (Deleting Stored Locations) Previously-set destinations can be deleted using this function. 1 Select . If is selected, all previous destinations will also be deleted. 2 Select the destination to be deleted. : Displays up to five previous suggestions.: Displays the pre...

46 English English Stored Locations Preset Destination ■ Preset Destination Storage Up to five regularly-used destinations can be stored so that, when required, they can be set forthe actual destination in a one-touch operation. 1 Select . 2 Select a preset number. 3 Set a preset destination area us...

English 47 ■ Preset Destination Confirmation and Modification This function allows preset destinations to be displayed in list form and allows them to bemodified. 1 Select . 2 Select 1 through 5 in accordance with the destination to be modified. 3 Select the button corresponding to the item to bemod...

48 English English Other Functions Displaying POI’s on a Map You can select one of the six categories on the menu or List Categories and then select the POI(s) tobe displayed on the map. 1 Select the screen. 2 Select (Points of Interest). 3 Select the categories to be displayed up to a maximumof fiv...

English 49 Showing POI Data You can display POI (Point of Interest) data, such as name, address and telephone number. 1 Display the POI. (see pages 33 and 48) 2 Select the desired POI by moving on top of the POI icon. The name of the selected POI appears.If no data is stored for the selected POI, th...

50 English English RDS TMC If an RDS-TMC (KNA-TM320) is installed, it will become possible to display and use congestioninformation. (The RDS-TMC (KNA-TM320) is an optional extra.) Select the country where your car is located at the moment by touching the appropriate switch. 1 Select . 2 Select (RDS...

English 51 Changing the country using TMC 1 Select or . : The Navigation System will automatically detect when you pass through a national border and will change the TMCservice station to the current country. : Manual setting can be performed to set the country whose signal is to be received. 2 Sele...

52 English English RDS TMC Displaying all traffic events 1 Select . All traffic event are displayed in sequence from the current position. 2 Select to display the position of a traffic event on the map, or to display details and further information. Displaying RDS-TMC Information RDS TMC Icon displa...

54 English English Remote Control The KNA-RC300 Remote Control is used in the same way as the touch panel. (The KNA-RC300Remote Control is an optional extra.) Remote Control Functions No. Name Description of function 1 Mode Mode switching (Navi, Monitor, Audio) 2 Enlarge/Reduce/ Enlarged and reduced...

English 55 The remote control features a pair of shortcut keys, and these can be assigned to any functions thatyou use on a regular basis. 1 Select . 2 Select (Navigation Set Up). 3 Select (Remote Control). Select to display the second page. 4 Select either or . 5 Select the function to be stored fr...

56 English English Voice Activate If the KNA-VC300 Microphone & Talk switch is connected, it will be possible to control theNavigation System through voice recognition. (The KNA-VC300 Microphone & Talk Switch is anoptional extra.) • Care should be given to the following points to ensure that...

English 57 Voice control can be carried out by simply clicking the talk switch and speaking a voice command(see the following section) into the microphone. 1 Click the talk switch. The system will emit a short confirmation beep. 2 Speak the desired voice command. Upon recognition, the system will em...

58 English English General Information ■ Accuracy of the Vehicle’s Position Area in which GPS signals cannot be received Because the radiowave signals from the GPS satellites travelprimarily by line of sight, the navigation system might not be able toreceive the signals in the areas described below....

English 59 Confirm whether any problem is due to a minor operational error or a malfunction. Check the tablebelow before contacting your local dealer for any repair service. The power does not come on. The fuse might be blown. The map does not scroll even when the vehicle is moving. The screen shown...

60 English English Specifications Specifications subject to change without notice. Navigation Section Antenna ......................................................................................................................................Micro-strip patched antenna Receiver channel ..............