Kenwood DT-7000S- Manuals

DT-7000S Instruction Manual 6 Controls and Features POWER Button (unit only): Turns the DT-7000S on and puts it into the Standby mode. Power Off/On Buttons (remote only): Emit discrete codes to turn the DT-7000S off and on. Category Jog Dial (unit)/CAT Buttons (remote): Puts the DT-7000S into the Ca...

Activating your SIRIUS subscription Before you can listen to the DT-7000S, you must subscribe to SIRIUS Satellite’s service.1. Make sure that the DT-7000S is properly connected to your audio system and that the antenna is oriented to receive the SIRIUS satellite signal (see pages 4 – 5 for details) ...

the presets. Each time you change a preset its number will appear on the display and the stream will play. Option 2: Press the ENTER button. The Preset List Screen will appear on the display, listing all of the stream presets that have been programmed in all 4 banks ( right ) • Use the CH./PRESET jo...

4. When one (or more) of the selected songs is playing on any stream, an aler t screen will be superimposed over the data on the original screen ( below ). • The number on the screen will count down from ‘10’ to ‘0’. To hear the song, press the ENTER button before the counter reaches zero; to make t...

5. When the display shows the correct hour and minute, press the ENTER button to turn the alarm on. 6. Press the MEMO button to save your settings. The Step 2—Set Stream screen will appear ( right ). 7. Use the CH/PRESET jog dial (unit) or press the CH buttons (remote) to move through the streams un...

DT-7000S Instruction Manual 13 Problem Possible Cause Solution No power on DT-7000S (display not illuminated) Power cord is not properly connected Make sure the power cord is properly connected No sound Audio and/or digital cable is not properly connected Incorrect input selected on receiver/control...

Activating your SIRIUS subscription Before you can listen to the DT-7000S, you must subscribe to SIRIUS Satellite’s service.1. Make sure that the DT-7000S is properly connected to your audio system and that the antenna is oriented to receive the SIRIUS satellite signal (see pages 4 – 5 for details) ...

DT-7000S Instruction Manual 8 Selecting entertainment In addition to the Normal Operation and Categor y Select screens, the DT-7000S has three ways to search for and select enter tainment: by stream, by ar tist, and by song. Selecting entertainment by stream (Stream List Mode) 1. Press the ENTER but...

the presets. Each time you change a preset its number will appear on the display and the stream will play. Option 2: Press the ENTER button. The Preset List Screen will appear on the display, listing all of the stream presets that have been programmed in all 4 banks ( right ) • Use the CH./PRESET jo...

4. When one (or more) of the selected songs is playing on any stream, an aler t screen will be superimposed over the data on the original screen ( below ). • The number on the screen will count down from ‘10’ to ‘0’. To hear the song, press the ENTER button before the counter reaches zero; to make t...

5. When the display shows the correct hour and minute, press the ENTER button to turn the alarm on. 6. Press the MEMO button to save your settings. The Step 2—Set Stream screen will appear ( right ). 7. Use the CH/PRESET jog dial (unit) or press the CH buttons (remote) to move through the streams un...

DT-7000S Instruction Manual 13 Problem Possible Cause Solution No power on DT-7000S (display not illuminated) Power cord is not properly connected Make sure the power cord is properly connected No sound Audio and/or digital cable is not properly connected Incorrect input selected on receiver/control...