Page 2 - Contents
2 | DPX-U5130BT/ DPX-U5130 Contents Before use 4 Safety precaution Important information Regulatory Compliance Appendix 5 Trademarks Specifications Basic operations 8 Component names Preparations How to select the item Adjusting the clock General operations Audio adjustments 11 Audio control Listen ...
Page 3 - English
English | 3 Hands-free phoning (Function of DPX-U5130BT) 32 Receiving a call Calling a number in the phone book Alphabet search Dialing a number Calling a number in the call log Speed dialing (Preset dial) Registering in the preset dial number list During a call Switching between Two Connected Cell-...
Page 4 - Before use; Safety precaution; Important information
4 | DPX-U5130BT/ DPX-U5130 Before use Safety precaution # WARNING To prevent injuries or a fire, take the following precautions: • Stop the car before operating the unit.• To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. ! CAUTION • ...
Page 5 - Appendix; Trademarks
English | 5 Appendix Trademarks • The “AAC” logo is a trademark of Dolby Laboratories. • “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performanc...
Page 6 - Specifications; FM tuner section
6 | DPX-U5130BT/ DPX-U5130 Specifications FM tuner section Frequency range 200 kHz space : 87.9 MHz – 107.9 MHz 50 kHz space : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 7.2dBf (0.63 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46dB) : 15.2dBf (1.6 μV/75 Ω) Frequency response (±3 dB) : 30 Hz...
Page 7 - Audio section; Specifications subject to change without notice.
English | 7 Audio section Maximum output power : 50 W x 4 Full Bandwidth Power (at less than 1% THD) : 22 W x 4 Speaker Impedance : 4 – 8 Ω Tone action Bass : 100 Hz ±8 dBMiddle : 1 kHz ±8 dBTreble : 12.5 kHz ±8 dB Preout level/ Load (CD) : 2500 mV/10 kΩ Preout impedance : ≤ 600 Ω Bluetooth section ...
Page 8 - Basic operations; Component names
8 | DPX-U5130BT/ DPX-U5130 Basic operations Component names (2) (2) (3) (1) (17) (4) (15) (16) (13) (14) (12) (5) (8) (9) (10) (11) (6)(7) (1) Disk slot Insert a disc (label side up) in this slot. (2) [1] - [6] button When listening to the radio, press the button to call a registered station.When li...
Page 9 - Preparations; Exiting the Demonstration mode; How to select the item; Select the Text scroll function item
English | 9 Preparations Exiting the Demonstration mode Turn off the Demonstration mode when you use the unit for the first time after installation. 1 Press the [Control knob] to quit the Demonstration mode when the message “CANCEL DEMO PRESS VOLUME KNOB” appears (approx. 15 seconds). 2 Turn the [Co...
Page 10 - General operations; Power; Pressing the button switches among sources.; Source; Volume; Adjusting the clock; The hour display blinks.
10 | DPX-U5130BT/ DPX-U5130 Basic operations General operations Power Turn the power on by pressing the [SRC] button.Press and hold [SRC] button to turn the power off. Source selection Press the [SRC] button. Pressing the button switches among sources. Source Display Standby “STANDBY” Tuner “TUNER” ...
Page 11 - Audio adjustments; The previous item appears.; Exit the Audio control mode.; Audio control; You can adjust the audio control items.; Display
English | 11 Audio adjustments ( : Factory setting)[1] “USER”: The customized Bass, Middle, and Treble settings are effective. [2] “SUB-W LEVEL”/ “LPF SUBWOOFER”/ “SUB-W PHASE” is selectable only if “SUBWOOFER SET” is set to “ON”. [3] SUB-W LEVEL”/ “SUBWOOFER SET”/ “LPF SUBWOOFER”/ “SUB-W PHASE” is ...
Page 12 - Listen to the iPod; • For information on the compatibility with iPod/; Playing music; Playing an iPod; Selecting a song
12 | DPX-U5130BT/ DPX-U5130 Listen to the iPod Models of iPods/iPhones that can be connected to this unit Made for • iPod nano (6th generation)• iPod nano (5th generation)• iPod nano (4th generation)• iPod nano (3rd generation)• iPod nano (2nd generation)• iPod nano (1st generation)• iPod with video...
Page 13 - Music search; You can search for the song you want to play.; Search for a song; Canceling the Music search mode; Alphabet search; Returning to the Music search mode.; Canceling the Alphabet search mode
English | 13 Music search You can search for the song you want to play. 1 Press the [ 1 ] button. “SEARCH” appears and enters the Music search mode. 2 Search for a song Operation type Operation Selecting items Turn the [Control knob]. Determining selection Press the [Control knob]. Skip Search Press...
Page 14 - Canceling the APP & iPod mode; Skip search ratio setting; Select the iPod source.; Enter the Function setting mode.; Exit the Function setting mode; Play function; Repeat play
14 | DPX-U5130BT/ DPX-U5130 Listen to the iPod APP & iPod Mode Allowing you to operate iPod with the control on the iPod. Press the [5] button. When the APP & iPod mode is selected, ”MODE ON” appears. Canceling the APP & iPod mode Press the [5] button. Operation when “APP&iPod MODE” ...
Page 15 - Pandora® internet radio (Function of iPhone®/ Bluetooth device); iPhone or iPod touch
English | 15 Pandora® internet radio (Function of iPhone®/ Bluetooth device) Requirements Pandora® internet radio Requirements for listening to the Pandora® internet radio are as follows:• In the application on your device, log in and create an account with Pandora. (If you are not already a registe...
Page 16 - Station search; “SEARCH” appears and enter the Station List mode.; Basic operation; Thumbs up; Pandora® internet radio
16 | DPX-U5130BT/ DPX-U5130 Station search You can select the station you want to listen to from your station list. 1 Press the [ 1 ] button. “SEARCH” appears and enter the Station List mode. 2 Use the [Control knob] to select a sort type. For how to use the [Control knob], refer to <How to selec...
Page 17 - New station registration; You can store a station in the memory.; ] button to select the; Preset tuning; Recalling a channel from the memory.; Pandora source control
English | 17 New station registration You can search for a desired station. You can register the displayed station as a new station in your station list. 1 Press and hold the [ 1 ] button. “NEW STATION” appears and enter the New station registration. 2 Use the [Control knob] select a search method. ...
Page 18 - Requirements AhaTM; Listening to the Aha Radio
18 | DPX-U5130BT/ DPX-U5130 Aha Radio (Function of iPhone®/ Android) Requirements Aha™ Requirements for listening to Aha™ are as follows:• In the application on your device, log in and create a free account with Aha. • Internet connection by 3G, LTE, EDGE, or WiFi. iPhone or iPod touch • Use an Appl...
Page 19 - Calling a number in the content; “MAKE A CALL” appears.
English | 19 Basic operations Pause and play a content Press the [ L ] button. Selecting a content Press the [ E ] or [ F ] button. Forward 30 seconds a content Press and hold the [ F ] button. Backward 15 seconds a content Press and hold the [ E ] button. “Likes” current content Press the [1] butto...
Page 20 - Listen to the CD/ Audio file; Search for music; Operation type; Select the USB source.
20 | DPX-U5130BT/ DPX-U5130 Listen to the CD/ Audio file Playing music Playing a disc Insert a disc in the Disc slot.When it is inserted, the source is switched automatically and playback starts. Playing a USB device Connect a USB device to the USB terminal using the CA-U1EX connecter (500 mA Max.: ...
Page 21 - Direct music search; Canceling the Direct music search mode; About the Audio file
English | 21 Play function Repeat play Press the [4] button. Switches between Track Repeat (“TRACK REPEAT”) and OFF (“REPEAT OFF”) when pressed while playing a CD.Switches between File Repeat (“FILE REPEAT”), Folder Repeat (“FOLDER REPEAT”), and OFF (“REPEAT OFF”) when pressed while playing an Audio...
Page 22 - About the USB device; About the discs used with this unit
22 | DPX-U5130BT/ DPX-U5130 About the USB device • When the USB device is connected to this unit, it is charged when this unit is powered. • Install the USB device in the place where it will not prevent you from driving your vehicle properly. • You cannot connect a USB device via a USB hub or multi ...
Page 23 - Listen to the tuner; Listening to the radio; Selecting a tuner source; Station preset memory; “STORED” appears and the station is registered.; Auto memory; Recalling a station from the memory.; Tuner setting; You can set up the tuner.; Select the Tuner source.; “LOCAL SEEK” Only stations whose reception is good are searched in; Exit the Function setting mode.
English | 23 Listen to the tuner Listening to the radio Selecting a tuner source Press the [SRC] button to select a “TUNER”. Selecting a band Press the [ 1 ] button. Pressing the button switches the receiving band (FM1, FM2, FM3, MW, SW1, SW2). Selecting a station Press the [ E ] or [ F ] button. Th...
Page 24 - Direct access tuning; Desired frequency; Frequency Step Setting
24 | DPX-U5130BT/ DPX-U5130 Direct access tuning (Function of remote control)You can search for a station directly by entering frequency. 1 Press the [DIRECT] button on the remote control. “– – – –” appears and enter the Direct access tuning mode. 2 Press the number buttons on the remote control to ...
Page 25 - Listen to the AUX; Start listening; Auxiliary input display setting; Select the AUX source.
English | 25 Listen to the AUX Start listening 1 Connect a portable audio player with 3.5 mm stereo mini plug audio cable (commercially available). 2 Select the AUX source. Refer to <Source selection> (page 10). 3 Turn on the portable audio player and start playback. Auxiliary input display se...
Page 26 - Display settings; Illumination color selection; You can select the illumination color of the panel.; Adjusting the Illumination color; You can adjust the illumination color of the panel.; Display & Illumination setting; You can set the display and illumination.
26 | DPX-U5130BT/ DPX-U5130 Display settings Illumination color selection You can select the illumination color of the panel. 1 Press and hold the [AUDIO] button. Enter the Function setting mode. 2 Use the [Control knob] to select “SETTINGS” > “DISP & KEY” > “COLOR SELECT”. For how to use ...
Page 27 - Text Display Selection; Text scroll; The displayed text scrolls.
English | 27 4 Use the [Control knob] to select a setting. The previous item appears. Exit the Function setting mode. Press and hold the [ 6 ] button. Text Display Selection You can change the information displayed on each of the following sources: 1 Press the [DISP]. On Audio file/ iPod source Info...
Page 28 - General settings; When a call comes in; Demonstration mode setting; You can turn on/off the demonstration mode.
28 | DPX-U5130BT/ DPX-U5130 General settings Muting the audio upon reception of a phone call Function of DPX-U5130The audio system automatically mutes when it receives an incoming call. When a call comes in “CALL” appears.The audio system pauses. Listening to the audio during a call Press the [SRC] ...
Page 29 - Initial settings; You can configure initial settings of this unit.; Select the Standby source.; “TYPE NORMAL”
English | 29 Initial settings You can configure initial settings of this unit. 1 Select the Standby source. Refer to <Source selection> (page 10). 2 Press and hold the [AUDIO] button. Enter the Function setting mode. 3 Use the [Control knob] to select “INITIAL SET”. For how to use the [Control...
Page 30 - “BT MODE” appears and enter the Bluetooth mode.; Exit the Bluetooth mode.; About the Bluetooth module; This unit conforms to the following Bluetooth; Version; A2DP (Advanced Audio Distribution Profile); Registering a Bluetooth device; You can register your Bluetooth device in this unit.
30 | DPX-U5130BT/ DPX-U5130 Registering a Bluetooth (Function of DPX-U5130BT) Bluetooth module that can be used with this unit • For details on the Bluetooth cell-phone with the hands-free function, see <About the Bluetooth module> (page 30). About automatic connection of the iPod touch or iPh...
Page 31 - You can delete a registered Bluetooth device.; Bluetooth device registration test
English | 31 When no device can be selected • If a cell-phone is already selected, deselect it, and then select a different one. • If you cannot select a device using the audio player, connect the device with the audio player. Deleting a registered Bluetooth device You can delete a registered Blueto...
Page 32 - Dialing a number; Enter a phone number.; Receiving a call; You can answer a phone call; Rejecting an incoming call; Calling a number in the phone book; Search for a name in the phone book.
32 | DPX-U5130BT/ DPX-U5130 Hands-free phoning (Function of DPX-U5130BT) Alphabet search You can search for a name in the phone book by the alphabet. 1 Press the [ 7 ] button. 1 Press the [ 1 ] button. Enter the Alphabet search mode and “<ABCDEFGHIJK>” appears. 2 Search for a name in the phone...
Page 33 - Calling a number in the call log; Enter the phone number you wish to register; During a call; Disconnecting a call; Adjusting the voice volume during a call
English | 33 Calling a number in the call log 1 Press the [ Ú ] button. “BT MODE” appears and enter the Bluetooth mode. 2 Use the [Control knob] to select “CALL HISTORY”. For how to use the [Control knob], refer to <How to select the item> (page 9). 3 Turn the [Control knob] to select a name a...
Page 34 - Clearing the disconnection message; “HF DISCONCT” disappears.; Making a call by voice dialing; ] button to start voice; “VOICE CONTROL” appears.; Canceling the voice recognize; Home
34 | DPX-U5130BT/ DPX-U5130 Hands-free phoning Clearing the disconnection message Press the [ Ú ] button. “HF DISCONCT” disappears. Making a call by voice dialing You can make a voice call using the voice recognition function of the cell-phone. 1 Press and hold the [ Ú ] button to start voice recogn...
Page 35 - • You need to register your Bluetooth audio player; Select the Bluetooth audio source.
English | 35 Bluetooth audio (Function of DPX-U5130BT) Before use • You need to register your Bluetooth audio player before using it with this unit. For more details, see <Registering a Bluetooth device> (page 30). • You need to select the Bluetooth audio player you wish to connect. Refer to &...
Page 36 - Registering the PIN code; Input the PIN code; Selection of numbers; Downloading the phone book
36 | DPX-U5130BT/ DPX-U5130 Bluetooth settings (Function of DPX-U5130BT) Registering the PIN code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. 1 Press the [ Ú ] button. “BT MODE” appears and enter the Bluetooth mode. 2 Use the [Control knob] to select ...
Page 37 - Deleting the phone book; Search for a number/name in the phone book.; Displaying the firmware version; Bluetooth detail setting; You can configure the initial settings of this unit.
English | 37 Deleting the phone book You can delete the phone book stored in this unit to which a cell-phone − which is not compatible with PBAP − is connected. 1 Press the [ 7 ] button. 2 Search for a number/name in the phone book. Operation type Operation Selection of name list and number list Tur...
Page 38 - Basic operation of remote control; Before using remote control; Preparing the remote control unit; Basic opreation; General control; On Tuner source
38 | DPX-U5130BT/ DPX-U5130 Basic operation of remote control Before using remote control Preparing the remote control unit Pull the battery sheet out from the remote control unit in the direction of the arrow. Changing the battery of the remote control unit (1) (2) Use a commercially available butt...
Page 39 - On iPod source; Making a call; Enter Bluetooth mode:
English | 39 On iPod source • Enter Music search mode: [ R ]/[ S ] • Selecting items during Music search mode: [ R ]/ [ S ] • Returning to previous item: [ 6 ] • Pause/Play: [ ENT ] On Pandora internet radio source • Song skip: [ F ] • Pause/Play: [ENT] • Enter the station list mode: [ R ]/[ S ] - S...
Page 40 - Troubleshooting guide; Setting error; General
40 | DPX-U5130BT/ DPX-U5130 Troubleshooting guide Setting error Some functions of this unit may be disabled by some settings made on this unit. ö Cannot set up display. Í The demonstration mode is not turned off as mentioned in <Demonstration mode setting> (page 28). ö Cannot set up the subwoo...
Page 41 - Error messages; Bluetooth Messages
English | 41 Error messages The messages shown below indicates your system condition. ö “PROTECT” (blink) Í The speaker wire has short-circuited or touched the chassis of the vehicle, and then the protection function has been activated. ò Lay or insulate the speaker cable properly and press the Rese...
Page 42 - Pandora Messages
42 | DPX-U5130BT/ DPX-U5130 Troubleshooting guide Pandora Messages ö “ADD ERROR” Í Registration of the station has failed. ö “CHECK DEVICE” Í Any device ready for Pandora internet radio reception is not connected to this unit. Í Pandora application has not started, you have not signed in, or system ...
Page 43 - Installation accessories; WARNING; CAUTION; For Good Reception; Accessories/ Installation Procedure
English | 43 Installation accessories 1 ..........1 2 ..........1 3 ..........6 4 ..........6 5 ..........2 6 (DPX-U5130BT only) 3 m .....1 Installation Procedure 1 To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2 Make the proper input and output wire conn...
Page 44 - Connecting Wires to Terminals
44 | DPX-U5130BT/ DPX-U5130 Connecting Wires to Terminals P.CONT ILLUMI REMOTE CONT REMOTE INPUT STEERING WHEEL ANT. CONT MUTE – + L R L R Antenna Cord FM/AM antenna input White/Black Gray/Black Green/Black Purple/Black White Gray Green Purple To front left speaker To front right speaker To rear rig...
Page 46 - Installation; Installing Toyota Cars
46 | DPX-U5130BT/ DPX-U5130 Installation Installation Install onto the car bracket using the supplied screws (M5 × 8 mm). The holes of the car bracket to use will differ depending on the car model. Accessory 3 (M5 × 8 mm) or Accessory 4 (M5 × 8 mm) Car Bracket Installing Toyota Cars Install onto the...
Page 47 - Installation the Microphone Unit
English | 47 DPX-U5130BT only Installation the Microphone Unit 1 Check the installation position of the microphone (accessory 6 ). 2 Remove oil and other dirt from the installation surface. 3 Install the microphone. 4 Lay the cable up to the unit with it secured at several positions using tape or th...