Kenwood CD-406 - Manuals

5 The OUTPUT level (UP/DOWN) keys of the remote controlunit can adjust the output levels from the LINE/OUT andPHONES jack of the unit. Connect a stereo headphone to the PHONES jack of the CDplayer. Output level ÷ It is not favorable for the sound quality to decrease the output level fromthis unit to...

6 CHECK ON/STANDBY POWER CLEAR P.MODE TIME DISP. RANDOM REPEAT DISC 2 DISC 1 DISC 1 DISC SKIP DISC 2 DISC 3 DISC 4 DISC 5 OPEN/CLOSE PHONES DISC 3 DISC 4 DISC 5 ON/STANDBY AUTO PAUSE ALL 0 SINGLETOTAL 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 REPEATTRACK NO. DISCNO. MULTI EDIT FILE RANDOM P...

8 Operation of remote control unit (Except for CD-403/DPF-R3030) 1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.3...

9 1 Preparing to play tracks Load/unload a disc. Close the tray. All DISC indicators " " light regardless of how many discs are present. Label side Disc tray 2 Place/remove a disc. 3 When loading or unloading other discs Preparation • Turn the unit ON. ÷ Do not touch the played side of disc....

10 Check that the unit is in the TRACK mode. ! ÷ Playback starts from the disc selected in order of the DISC No. ÷ When the 3 / 8 key is pressed without selecting a disc, playback starts from the indicated DISC No. Normal play (TRACK mode) Use the following procedure to play a CD in the original ord...

12 You can select the display type and check the disc informa-tion. ÷ Load a disc in the CD player. Preparation Displays Display scrolling (CD-406/DPF-R6030 only) Some titles contain so much text information that the full titleswill not fit on the display. In cases like this, the letters on thedispl...

13 Programmed play (PGM mode) Use the following procedure to program desired tracks in adesired order. (up to 32 tracks) ÷ Load a disc in the CD player. Press so that the “PGM” indicator lights. 1 Preparation Do this operation in the stop mode. ÷ Up to 32 tracks can be programmed. When “FULL” is dis...

14 To check or change the programmed tracks 1 Press the CHECK key. Press until the trackNo. to be changed isdisplayed. 2 Select the disc. 3 Select the new track No. 4 Set the entry. To add a track to the program 1 Select the disc. 2 Select the desired track No. 3 Press the P.MODE key. Blinks. ÷ Perf...

15 Press to clear tracks from the end. To clear tracks from the program To clear all tracks ÷ Each time the key is pressed, the last track in the program is cleared. ÷ The tracks which are programmed earlier than the track being playedcannot be cleared. ÷ Selected tracks can be also completely clear...

16 Playback in a random order (Random playback) ™ As tracks are selected at random, you can enjoy listening tofor a long time. ÷ Load a disc in the CD player. Preparation 1 2 Press the RANDOM key. In case track No. 5 is selected ÷ Each time a track ends, the same operation as above is repeated, andt...

17 Repeated playback ™ Preparation ÷ Load a disc in the CD player. To repeat the entire disc This allows repeated playback of all the tracks on the discloaded in the disc tray. 1 P r e s s s o t h a t t h e “ P G M ” i n d i c a t o rgoes off. 2 Press the REPEAT key. For the CD-406/DPF-R6030 The cur...

18 To cancel repeated playback Press the REPEAT key. Repeated playback REPEAT indicator goes off. CD-406/DPF-R6030 CD-404/403/DPF-R4030/R3030 REPEAT 1 P r e s s s o t h a t t h e “ P G M ” i n d i c a t o rlights. To repeat only the programmed tracks 2 Select the disc. 3 Select the desired track num...

19 Blinks. CD-406/DPF-R6030 The following procedure allows to record a CD within thespecified tape length so that no music is interrupted in themiddle at the ends of sides A and B. Editing (Except for CD-403/DPF-R3030) Preparation 1 Light the “EDIT” indicator. ÷ Load a disc in the CD player. ÷ Check...

20 To clear the edited contents To check the edited contents ÷ When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B. Playing or recording the edited contents Press the 6 key to start playback according to the edited content. The ...

21 Timer operations Timer playback of CD can be started at any time using anaudio timer which is available in audio stores. 1 Turn the powers of the associated componentsON. 2 Preparation Load a disc in the CD player. 9 Set the amplifier volume. 3 1 Play the disc. Set the timer ON time. 4 Set the ti...

22 Never play a cracked or warped disc. Cleaning If fingerprints or foreign matter be-come attached to the disc, lightlywipe the disc with a soft cotton cloth(or similar) from the center of thedisc outwards in a radial manner. Storage When a disc is not to be played for along period of time, remove ...

23 ÷ Power plug is loosely connected. ÷ With the power plug connected to the switchedAC outlet of an amplifier, the power of theamplifier is turned off. ÷ Disc is loose. ÷ Disc is too dirty. ÷ Disc is cracked. ÷ Condensation has occurred on the optical lensunit. ÷ The connection cords are inserted l...

24 Specifications DPF-R6030 / CD-406 [ Format ]System .......................... Compact disc digital audio systemLaser ...................................................... Semiconductor laser [ D/A Convertors ]D/A Conversion ........................................... 1 Bit (D.R.I.V.E.)Oversampli...