Kenmore DU5092 - Manuals - manualsarea.com

Page 2 - BEFORE USING YOUR NEW VACUUM CLEANER

- 2 - Before Using Your New Vacuum Cleaner ........................................................................ 2Packing List ..................................................................................................................... 2Important Safety Instructions ........................

Page 3 - IMPORTANT SAFETY INSTRUCTIONS

- 3 - WARNING! Your safety is important to us. To reduce the risk of fire, electrical shock, injury to persons or damage when using your vacuum cleaner, follow basic safety precautions including the following: IMPORTANT SAFETY INSTRUCTIONS • Use your vacuum cleaner only as described in this Use &...

Page 4 - SAVE THESE INSTRUCTIONS

- 4 - IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your vacuum cleaner is intended for Household use. Read this Use & Care Guide carefully for important use and safety information. This guide contains safety ...

Page 5 - VACUUM CLEANER WARRANTY

- 5 - VACUUM CLEANER WARRANTY LIMITED WARRANTY FOR ONE YEAR from the date of sale this product is warranted against defects in material or workmanship. WITH PROOF OF SALE a defective product will be replaced free of charge. The Kenmore brand is used under license. Direct all claims for warranty serv...

Page 7 - PARTS AND FEATURES

- 7 - PARTS AND FEATURES Handle Flexible Hose Hose Release Button Wand Release Button Lift Up Button Wand Suction Control Pet HandiMate ® On/Off Switch Accessory Storage Connection Hose Handle Release Button Carrying Handle Dust Cup Release Button Dust Cup Exhaust Filter Cover (HEPA Media Exhaust Fi...

Page 8 - ASSEMBLY INSTRUCTIONS

- 8 - Body Handle Wand Nozzle Upper Slot Protrusion I Protrusion II Lower Slot 1. To place the body onto the nozzle, carry the body over the nozzle and align the nozzle neck with the guides in the body and slowly drop into place until a ‘click’ is heard. 2. Insert the handle into wand until you hear...

Page 9 - WARNING

6. Lock power cord plug onto the power cord. 4. Insert the hose into body until you hear a ‘click’. - 9 - NOTE: DO NOT tilt the wand to insert it into the nozzle neck.DO NOT insert the wand before placing the body onto the nozzle. WARNING Electrical Shock and Personal Injury HazardWrapping the cord ...

Page 11 - OPERATION MODES

UPRIGHT MODE NOTE: Make sure the vacuum cleaner is completely assembled and the dust cup is empty before using. Do not operate vacuum cleaner without filters in place. 1. Release the handle by placing foot on the nozzle and pull back to change handle position. 2. Turn on the vacuum cleaner by pressi...

Page 15 - PERFORMANCE/SAFETY FEATURES; ATTACHMENTS; ATTACHMENT USE TABLE; ATTACHMENT; CLEANING AREA

PET HANDIMATE ® The Pet HandiMate ® can be attached to the end of the handle and the wand. Pet HandiMate ® pivots for more convenient cleaning. Use Pet HandiMate ® for cleaning fabric surfaces such as furniture and carpet. See ATTACHMENT USE TABLE on this page. To return the combination tool to crev...

Page 18 - II

1. Slide the dust cup release button to remove the dust cup from the main body. 3. Position dust cup area of vacuum over a waste receptacle. Press down on the dust release button to open dust cup lid and allow contents to drop into waste receptacle. 2. Remove any clogs that might be located in the s...

Page 20 - FOAM AND FELT FILTERS CLEANING

It is recommended to clean the foam and felt filters with cold water every three months. NOTE: When the cleaning of filters no longer restores vacuum cleaner suction to full power, or the filters are worn or broken, replace the filters. To purchase filters, call 1-877-531-7321 (US) / 1-844- 608-3081...

Page 21 - HEPA MEDIA EXHAUST FILTER CLEANING

NOTE: Make sure the exhaust filter cover is properly installed. 3. Wash with cold water only, DO NOT use detergent or soap. Allow to air dry. Allow parts to dry 24 hours before putting back into vacuum cleaner. NOTE: DO NOT operate without post- motor filter installed.DO NOT wash in the dishwasher. ...

Page 23 - REMOVING CLOGS

CHECKING CONNECTION HOSE FOR CLOGS To separate the body from the nozzle, press the Lift-Up button and lift up the body. 1. Check and remove any clogs in the connection hose. 2. Reattach the nozzle onto the vacuum body. - 23 - REMOVING CLOGS Lift-Up Button Connection Hose

Page 24 - TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION Vacuum cleaner won’t run. Unplugged at wall outlet. Plug in firmly, press the On/Off switch to “I” or “II” position. The On/Off switch is not pressed to start the vacuum cleaner. Press the On/Off switch to “I” or “II” position. Defective wall outlet. Check with a good...