Page 2 - ÅëëçíéêÜ; obs3ugi i ; Wskazówki bezpieczeñstwa; i przestrzegaæ podanych w nich
Polski Suomi Svenska Norsk ÅëëçíéêÜ Dansk Español Nederlands Italiano Français English Lesen Sie vor der Inbetriebnahme diese Betriebsanleitung und beachtenSie besonders die “Sicherheitshinweise”. Please read these operating instructions before starting and strictlyobserve the "Safety Instructio...
Page 3 - English; IMPORTANT INFORMATION; Caution! Used batteries are a danger to the environment!; Contents
13 English IMPORTANT INFORMATION ! For your safety Before using the machine for the first time, read these user instructions and the appended booklet Safety Informa- tion 5.956-250 . Please note carefully all the information contained in them. Risk of explosion when charging the battery When low-...
Page 4 - General data
14 English General data The sweeper is designed for 24 V direct current. It has been provided with a 24 V trough battery (supplied with the 1.091- 111). In the case of other machines, the battery and its appropriate charger must be obtained separately.Your Kärcher dealer will be pleased to advise yo...
Page 5 - OPERATING CONTROLS
15 English OPERATING CONTROLS 1. Ignition lock 2 . Pilot lamp - drive malfunction 3. Battery charge monitoring indicator 4. Raise/lower RH side brush 5. Raise/lower main brush 6. Raise/lower LH side brush (optional) 7. Two-handed operation hydraulics 8. Operating hours counter 9. Lights 10. Bulk was...
Page 6 - PRIOR TO INITIAL START-UP; Directions for unloading; Do not use a fork-lift truck for unloading the; Pushing the sweeper by hand; PRIOR TO EVERY START-UP; Adjusting the drivers seat
16 English PRIOR TO INITIAL START-UP Directions for unloading ! Do not use a fork-lift truck for unloading the sweeper as the sweeper can sustain damagein this way. The sweeper has been fastened to a pallet for safe transport. Proceed as follows for unpacking it:1. Remove wooden boards from the pall...
Page 7 - Important information; : The braking effect can be increased by careful; Recommendation; Manual cleaning; Note; : Following steps can only be performed with the
17 English Make sure that the LH side brush (if fitted) is still in the raised position,the RH side brush is still in the raised position,the main brush is still in the raised position. Put the starting key into Position 1. The sweeper is ready to operate. ! Important information The drive m...
Page 8 - Typical applications; Caution while sweeping!; Overcoming obstacles
18 English Note : The hopper can only be emptied when the supporting arms have reached a horizontal position. To avoid the dust billowing up when the hopper is emptied, the waste hopper should be lowered as far as possible into the discharge container. Tip the waste hopper 1 + 3 + When you release...
Page 9 - Battery; Safety instructions to be noted when handling; had instruction from skilled personnel.; Charging the battery
19 English Battery Safety instructions to be noted when handling batteries are: Note instructions for use and displaythem where they can be easily seen at the place where the battery is charged.Work with batteries only after having had instruction from skilled personnel. Wear protective glasses and ...
Page 10 - MAINTENANCE; Maintenance
20 English MAINTENANCE Initial inspection after 8 operating hours ! Caution! For the safe functioning of your sweeper, an initial inspection must be carried out after 8 hours of operation. You should have the inspection done by your Kärcher Customer Ser- vice. inspect all bowden cables and adjust w...
Page 11 - Adjusting the sweeping pattern; Replacing the main brush roller
21 English Adjusting the sweeping pattern – Open the unit cover and secure it in place. – The sweeping pattern can be altered by turning the central adjusting knob: To increase size of sweeping pattern: turn adjusting knob counter-clockwise (towards +).To reduce size of sweeping pattern: turn adjust...
Page 12 - Replacing fuses; Replacing the dust filters
22 English Replacing fuses – Park the sweeper, switch it off and make it secure. – Pull out battery plug connection and open the unit cover. – Replace blown fuses with ones with the same rating. Note : If a fuse blows repeatedly, this indicates a fault somewhere in the electrical system. Please call...
Page 13 - Technical Data
23 English Technical Data Dimensions and weights: Length 1.650 m m Width 1.000 m m Height 1.270 m m Weight unladen (ready to operate) 580 kg Total permissible weight 730 kg Driving and sweeping performance: Sweeping path width without side brush 750 m m Sweeping path width with 1 side brush 1.000 m ...
Page 14 - Troubleshooting
24 English Troubleshooting Problem Possible cause Remedy Sweeper does not move Battery is flat Recharge or replace battery Warning light flashes Follow the startup sequenceCall Customer Service Fuse has blown Replace fuse Free-wheeling mechanismswitched on See “Pushing the sweeper byhand” The safety...
Page 15 - KARCHER
1.091-101.0 KMR 1250 BAT 20.03.2000 1.091-111.0 KMR 1250 BAT Package 6.905-986.0 7.651-002.0 6.651-382.0 5.031-378.0 6.277-428.0 6.277-435.0 6.277-427.0 6.277-427.0 6.414-532.0 6.348-306.0 6.905-982.0 4.038-524.0 7.306-500.0 7.312-260.0 5.190-084.0 5.190-084.0 6.435-318.0 6.435-319.0 7.313-003.0 7.6...