Page 2 - OVERVIEW High Pressure Washer; Machine includes
2 OVERVIEW High Pressure Washer Machine includes 1 Handle2 Gun/hose storage handle3 Knob Assembly (two each, Bolt & Knob)4 On/Off switch5 High pressure outlet (not pictured)6 Wash brush7 Variopower nozzle Never point nozzle at people or animals. Never drink alcohol or use drugs while operating t...
Page 3 - GROUNDING INSTRUCTIONS; Extension Cords
3 IMPORTANT PRECAUTIONS – Read First! Caution • Follow the maintenance instructions specified in the manual. • This machine has been designed for use with cleaning detergent suppliedor recommended by the manufacturer.The use of other cleaning detergents mayaffect the operation of the machine andvoid...
Page 4 - IMPORTANT PRECAUTIONS –; continued; ASSEMBLY INSTRUCTIONS; Water Supply
4 IMPORTANT PRECAUTIONS – continued ASSEMBLY INSTRUCTIONS • Never use the pressure washer to draw in water contaminated with solvents, e.g.paint thinners, gasoline, oil, etc. NOTE: Dirt in the feed water will damage the unit. To avoid this risk,we recommend fitting a water filter. • Always prevent d...
Page 5 - OPERATING INSTRUCTIONS
5 OPERATING INSTRUCTIONS Step 1 Connect the high pressure hose to the unit’shigh pressure outlet. Step 2 Insert the variopower nozzle into the triggergun. Press in against the spring tension andtwist into the locked position. Step 3 Connect garden hose to unit’s water inlet. Step 4 Connect garden ho...
Page 6 - USING THE ACCESSORIES; Warning
6 USING THE ACCESSORIES The variopower nozzle allows you to adjustthe cleaning pressure. To clean at maximumpressure, the variopower nozzle must bepositioned to the high pressure setting (+).To apply detergent, the variopower nozzlemust be positioned to the low pressuresetting (-). This brush is ide...
Page 8 - five minutes or more; WINTERIZING AND LONG-TERM STORAGE
8 SHUTTING DOWN & CLEAN-UP TAKING A BREAK... five minutes or more Step 1 Remove detergent suctiontube from jug and insertinto 1 gallon (5 L) of freshwater. Siphon water atlow pressure for oneminute. Step 2 Turn the switch tooff (0) position andunplug cord fromoutlet. Step 3 Turn off the watersou...
Page 9 - CLEANING TIPS; Recommendations
9 CLEANING TIPS Recommendations • Before cleaning any surface an inconspicuous area should be cleaned totest spray pattern and distance formaximum cleaning results. • If painted surfaces are peeling or chipping, use extreme caution as pressure washermay remove the loose paint from thesurface. • When...
Page 10 - CLEANING TIPS –; KÄRCHER 2 YEAR WARRANTY; Patio & Lawn Furniture
10 CLEANING TIPS – continued Barbecue Grills, Outdoor PowerEquipment & Gardening Tools (with or without detergent) Pre-rinse cleaning surface with fresh water. Ifusing Kärcher Pressure Wash or Degreaser, place detergent suction tubedirectly into cleaning solution and applydetergent at low pressu...
Page 11 - TROUBLESHOOTING
11 TROUBLESHOOTING Disconnect the machine from the power source before making any repair. Symptom Motor will not start. Unit does not reach high pressure. Output pressure varies high and low. Cause On/Off switch is in the “OFF”(O) position. Power cord is not plugged in. Extension cord is too long.Ex...
Page 12 - TROUBLESHOOTING –
12 TROUBLESHOOTING – continued Solution Dilute detergent. Run warm water through filter toremove debris. Remove obstruction or replacedetergent suction tube. Turn nozzle tip to low pressureposition. Blow out or remove debris with afine needle. Tighten fittings. Insert new washer. Insert the spray no...