Page 2 - Model K 395 M OVERVIEW
2 Item Description 1. Vario Spray wand2. Rotating spray wand3. Trigger gun4. Trigger gun safety lock5. High pressure hose6. Mobile adapter bracket (qty. 2)7. Power cord & GFCI8. Hose/cord caddy9. Trigger gun holder10. Detergent tank11. On/Off switch12. Detergent filter & suction tube13. High...
Page 3 - IMPORTANT PRECAUTIONS –; Safety Warnings; EXTENSION CORDS; Caution
3 IMPORTANT PRECAUTIONS – Read First! 2 Safety Warnings When using this product, basic precautionsshould always be followed:• Read all the instructions before using theproduct. • High pressure jets can be dangerous ifsubject to misuse. The jet must not bedirected at persons, animals, electricaldevic...
Page 4 - IMPORTANT PRECAUTIONS –; continued; PRECAUTIONS
4 Water Supply (Cold Water Only) • Water hose must be at least 3/4 inch indiameter. • Flow rate of water supply must not fallbelow 2.5 GPM (gallons per minute). • Flow rate can be determined by runningthe water for one minute into an empty“5-gallon container. Step 1 Attach one adapter bracket topres...
Page 5 - OPERATING INSTRUCTIONS
5 OPERATING INSTRUCTIONS Step 1 Connect the high pressure hose to the unit’shigh pressure outlet. Step 2 Inser t the spray wand of your choice into thetrigger gun. Press in against the springtension and twist into the locked position. Step 3 Connect garden hose to unit’s water inlet. Step 4 Connect ...
Page 6 - Warning
6 This wand features a 0º pencil jet which rotates 360º for maximum dirt cutting action,effectively increasing cleaning performance up to 50%. This wand combines the cleaning performance of a 0º pencil jet with thesurface coverage of a wide angle nozzle. Not recommended for soft materials,siding, pa...
Page 7 - Working with detergents; or visit our website:
7 Step 1 Install the Vario spray wand into the triggergun. Set the Vario spray wand to the lowpressure setting (–) by turning the wandcollar. The wand must be set in the lowpressure (–) position to apply detergents. Step 2 Fill the detergent tank with Kärcherdetergent. Place the filter end of deterg...
Page 8 - WINTERIZING AND LONG-TERM STORAGE
8 Step 6 Disconnect the high pressure hose from the high pressureoutlet and engage the gun safety lock. Step 1 Engage gunsafety lock. 1. Disconnect all water connections.2. Turn on the machine for a few seconds , until the water which had remained inthe pump exits. Turn off immediately. 3. Do not al...
Page 9 - CARE AND MAINTENANCE INSTRUCTIONS
9 Deck Cleaning (with or without detergent)Pre-rinse deck and surrounding area with freshwater. If using Kärcher Deck Wash, placedetergent suction tube directly into cleaningsolution and apply to surface at low pressure.For best results, limit your work area to smallersections of approximately 25 sq...
Page 10 - CLEANING TIPS –; Patio & Lawn Furniture; OPTIONAL CLEANING ACCESSORIES
10 Barbecue Grills, Outdoor PowerEquipment & Gardening Tools (with or without detergent)Pre-rinse cleaning surface with fresh water.If using Kärcher All Purpose Cleaner orDegreaser, place detergent suction tubedirectly into cleaning solution and applydetergent at low pressure. Allow Kärcherdeter...
Page 11 - TROUBLESHOOTING
11 TROUBLESHOOTING Disconnect the machine from the power source before making any repair. Symptom Motor will not start Unit does not reach highpressure. Output pressure varieshigh and low. Cause On/Off switch is in the “OFF” (O)position. Power cord is not plugged in. Extension cord is too long.Exten...
Page 12 - TROUBLESHOOTING –
12 TROUBLESHOOTING – continued If you encounter any additionaldifficulties not listed, please call ourservice center for help. Karcher Customer Support USA Solution Check connection. Dilute detergent, for best resultsuse Kärcher detergent. Run warm water through filter toremove debris. Remove obstru...