Kambrook KI820 - Manuals

7 Operating Instructions Before First Use Remove any promotional material or packaging from the iron.Remove any sticker or protective cover from the soleplate. When operating the iron for the first time, iron on an old piece of fabric to ensure that the soleplate and water tank are completely clean....

8 Operating Instructions continued Stand the iron on its heel and turn the Temperature Control to MIN.Plug the power cord into a 230V or 240V power outlet and switch on.Select the temperature setting required by rotating the Temperature Control dial so that the desired setting is aligned with the Te...

10 How To use Shot Of Steam The shot of steam provides an extra burst of steam which is ideal for the removal of stubborn creases and wrinkles during STEAM or DRY ironing.Turn the Temperature Control to the hottest setting and wait until the heating indicator light goes out. Ensure the Steam Control...

11 Anti Drip System The Kambrook DuraGlide™ Anodized Iron is equipped with an Anti-Drip System. The iron will automatically close the steam valve when the soleplate temperature is too low to produce steam. When this happens you will hear a click sound. It is safe and will not harm the performance of...

12 How To use Shot Of Steam continued After Each Use • Set the steam selector to the DRY position and turn the Temperature Control to minimum (MIN). • Switch the power off at the power outlet and disconnect the power cord from the power outlet. • Open the water filling cap and (over a sink or bucket...

13 Care and Cleaning To ensure your iron maintains optimum performance it is recommended that it be cleaned using the Self-Clean function to remove scale or impurities.• Set the steam selector to the MIN position. • Fill the water tank up to the maximum level (MAX) with the water cup supplied. • Set...