Kambrook KCF200 - Manuals - manualsarea.com

Page 3 - Contents; Kambrook Recommends

Contents Kambrook Recommends p4 Safety First Your Carbon Tower Heater p6 Quick Start Guide p7 Using Your Carbon Tower Heater p8 Care and Cleaning p11 Warranty Details p12 KCF200_IB_V4.indd 3 21/10/09 9:34 AM

Page 4 - Kambrook Recommends Safety First; IMPORTANT: Please retain your; consumer product, so that you, our valued customer can confidently; Important Safeguards For Your Kambrook; In order to

4 Kambrook Recommends Safety First IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appli...

Page 5 - Important Safeguards For All Electrical

5 • Do not allow materials that have been in contact with oil, petroleum based products or drying fluids to come in contact with the heater. • Do not run the cord under carpeting or cover the cord with rugs, runners or the like. Arrange cord away from traffic areas and where it will not be tripped o...

Page 6 - Your Kambrook Carbon Tower Heater; Control Panel

6 Your Kambrook Carbon Tower Heater 1. 1000 watt heating elements for efficient heating 2. ThermoGuard protection for peace of mind 3. Carbon heating elements for gentle heating and minimal moisture loss 4. Convenient carry handle 5. Safety tip-over cut-out switch Control Panel 6. Convenient 3hr aut...

Page 7 - Quick Start Guide; Hints/Tips to Retain Heat in

7 Turn the TIMER dial to the ON position. Quick Start Guide Hints/Tips to Retain Heat in Your Home • Don’t overheat your home. The temperature of a heated room in winter should be 18-21°C • Your heater will work more efficiently if you stick to Kambrook’s recommended clearance spaces • Choose the ri...

Page 8 - Using Your Carbon Tower Heater; Turning Your Heater On; To avoid an electrical; Assembling Your Heater

8 Using Your Carbon Tower Heater Use the screws provided to secure the tower body to the base. Clip the cord into the straight slot, running from the centre to the edge of the base. Ensure the cord is tidily fitted into the channel, and flush with the base.Turn the Carbon Tower Heater back to an upr...

Page 9 - Setting the Heating Mode; Setting the Auto-Off Timer

9 Setting the Heating Mode CAUTION: DO NOT COVER SWING HIGH MODE OFF LOW 30 0 MINS 60 90 120 150 TIMER 180 ON To control the heater, turn the MODE dial as follows.The Heat Setting dial has 3 modes: OFF - Shuts off the heater 1 - Low heat setting (500W) 2 - High heat setting (1000W) Once the heat set...

Page 11 - Care and Cleaning

11 Care and Cleaning Ensure that the heater is switched off and disconnected from the power point before cleaning.Use a clean, dry cloth to clean the external surfaces of the heater. If the heater has collected dust or dirt inside the unit or around the elements, have the unit cleaned by a qualified...