Page 2 - Caller ID Speaker Phone V10M10_IM_EN_03232007
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 1 -
Page 3 - USER SAFETY GUIDE; INSTRUCTIONS ON ENVIRONMENT PROTECTION; Important Safety Instructions
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 2 - USER SAFETY GUIDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic applianc...
Page 4 - through a modular telephone outlet or jack.
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 3 - USER SAFETY GUIDE Compliance (USA and Canada) This product complies with the standards in Part 68 of the FCC Rules in the USA and CS-03 in Canada. 1. This product must be connected to the public switched telephone network through a mod...
Page 5 - TABLE OF CONTENTS; Troubleshooting and Specifications
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 4 - TABLE OF CONTENTS Getting Started General Features ……………………………………………………………………... 5 In the Package ………………………………………………………………………... 5 Location of Controls ………………………………………………………………..… 6 Getting the Telephone Ready for Use ……………………………………………...
Page 6 - GETTING STARTED; General Features
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 5 - GETTING STARTED Thank you for purchasing the JT-P531 Caller ID Speaker Phone. Please read and follow the instructions in this manual carefully to ensure that your product operates correctly. General Features • FSK/DTMF Dual System Call...
Page 7 - Location of Controls; Button
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 6 - GETTING STARTED Location of Controls 1. LCD Screen 11. STORE Button 2. Ringer Light 12. HOLD Button 3. Handset 13. M1 (Memory 1) Button 4. Handset Jack 14. FLASH Button 5. Numeric keypad 15. M2 (Memory 2) Button 6. DEL. Button 16. REDI...
Page 8 - Getting the Telephone Ready for Use; The tab slides for easy removal.; LIP
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 7 - GETTING STARTED Getting the Telephone Ready for Use 1. Choose a desired location for the unit (mounted or on a flat, level surface). 2. Adjust the removable tab located above the speaker on the base of the phone. • The tab slides for e...
Page 9 - Getting the Telephone Ready for Use- continued; Align nails or picture hooks with the wall-
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 8 - GETTING STARTED Getting the Telephone Ready for Use- continued 4. Plug one end of the flat telephone cord into the jack in the rear of the unit’s base (marked TEL-LINE), and the other end into the wall jack which supplies telephone ser...
Page 10 - Connecting the Stand for Flat Surface Placement-continued; of the unit and place the lips into the slots.
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 9 - GETTING STARTED Connecting the Stand for Flat Surface Placement-continued 4. There are four (4) slots. The top two (2) slots are situated closer together and are on the bottom surface of the unit. The bottom two (2) slots are situated ...
Page 11 - Installing the Batteries
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 10 - GETTING STARTED Installing the Batteries The JT-P531 requires three (3) AAA batteries, which are used to operate the speakerphone, the LCD display, and to retain Caller ID data and any settings programmed into the phone. Using an opti...
Page 13 - OPERATIONAL INSTRUCTIONS; Description of the Display; Note
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 12 - OPERATIONAL INSTRUCTIONS Description of the Display The JT-P531 features a three-line LCD. The top line displays basic information; the middle line shows the telephone number of the incoming call; and the bottom line displays the name...
Page 14 - Basic Setup-continued
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 13 - OPERATIONAL INSTRUCTIONS Basic Setup-continued 3. SET AREA CODE • When the LCD displays “LOCAL AREA CODE”, press [ DIAL ] to enter this function. • Use [ ▼ ] to select the each digit of area code. • Use [ ▲ ] to confirm each digit and...
Page 15 - STORE; Basic Instructions for Making a Phone Call
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 14 - OPERATIONAL INSTRUCTIONS Basic Setup-continued 8. LCD ADJUSTMENT • Press [ VIP/LCD ] to adjust the brightness of the LCD screen. • There are six (6) levels of brightness (Level 3 is the default setting) 9. SAVING NUMBERS IN THE PHONEB...
Page 16 - Using the Last Number Redial Function
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 15 - OPERATIONAL INSTRUCTIONS Using the Last Number Redial Function 1. Remove the handset from base and listen for dial tone. 2. Use the [ REDIAL/P ] button redial the last number dialed (typically most helpful when the line is busy). Rece...
Page 17 - Calling a Number from the Caller ID List
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 16 - OPERATIONAL INSTRUCTIONS Calling a Number from the Caller ID List 1. With the handset is on the hook, press [ ▲ ] or [ ▼ ] to find the number you wish to call. 2. Press [DIAL] once; the LCD will display “PICK UP OR ADJ,” (for a 10 dig...
Page 18 - Dialing from Two-Touch Memory; the; HOLD; and
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 17 - OPERATIONAL INSTRUCTIONS Dialing from Two-Touch Memory 1. Pick up the handset or press [SPEAKER] . 2. Press [DIAL] and number (0-9). The number in memory will dial automatically. Using the Flash Function When the JT-P531 is used in an...
Page 19 - TROUBLESHOOTING & SPECIFICATIONS; Troubleshooting; No Display on LCD Screen; Increase brightness level.; No Dial Tone when handset is picked up; Make sure the base jack (TEL-LINE) jack is connected to the wall; Static or interruptions during phone conversation; Hang up and dial number again; Can only receive incoming calls and cannot make outgoing calls; Specifications; Operating Temperature:
Caller ID Speaker Phone V10M10_IM_EN_03232007 www.jWIN.com - 18 - TROUBLESHOOTING & SPECIFICATIONS Troubleshooting • No Display on LCD Screen o Brightness on display may be turned down. Increase brightness level. o No batteries or batteries are improperly installed. If no batteries, install ...