Page 2 - Front Panel
When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear). When discarding batteries, environmental problems must be considered and the local rules or laws governing the ...
Page 3 - Remote control; Basic Connections; RF Connection
Remote control * Not function with this recorder. On-screen display If you press OK on the remote control when “O.S.D.” is set to “ON”, you can see the current recorder status on the TV screen. After about 5 seconds, indications other than the time counter disappear. To clear the time counter, press...
Page 4 - Initial Settings; Video Channel Set; Installing/Removing the lithium battery; Auto Set Up
Initial Settings Video Channel Set Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable. Before performing the following steps, make sure the recorder’s power is off and there is no cassette inserted in the ...
Page 5 - Playback; Basic Playback
Language Setting A Access Main Menu screen, then Initial Set screen Press MENU on the remote control. Press rt to place the pointer next to “INITIAL SET”, then press OK or e . B Access Language Select screen Press rt to place the pointer next to “LANGUAGE”, then press OK or e . C Select language Pre...
Page 6 - Playback Features
Playback Features Adjusting tracking condition— tracking adjustment Automatic tracking adjustment Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback. Manual tracking adjustment If aut...
Page 7 - Recording; Basic Recording; Recording Features; Watching one program while recording another
Recording Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the hole with adhesive tape. Basic Recording A Load a cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive ta...
Page 8 - Timer Recording; Express Timer Programing
Timer Recording Up to 8 timer recording programs can be made using Express timer programing method as far as a year in advance. Remember, the clock must be set before you can program the timer. NOTES: ● If all the 8 programs have already been set, “PROGRAM FULL” appears on the TV screen. ● After tim...
Page 9 - Program overlap warning display; Other Functions; Checking tape position
Program overlap warning display If “PROGRAM OVERLAPPED” appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking. Example:Program 1 (you have just made) and Program 4 overlap each other. A Select progr...
Page 11 - Multi-Brand Remote Control; TV Brand Setting
Multi-Brand Remote Control This remote control can control some functions of remote controllable TVs, cable boxes, satellite receivers or DVD sets listed below. Without setting, you can control a JVC TV. NOTES: ● Some unit’s brands have more than one code. If the unit does not function with a specif...
Page 13 - Information on Multi-System Compatibility
Information on Multi-System Compatibility Off-Air Recording The built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K broadcasts. Playback This recorder can play back all 4 types of recorded tape. NOTES: When viewing NTSC tapes on a PAL TV set: ● The picture m...
Page 14 - Tuner Setting; Auto Channel Set; Manual Channel Set
Tape-To-Tape Editing There are 4 different types of recorded tape, depending on the signal recorded. Tuner Setting IMPORTANT Perform the following steps only if auto channel set has not been set correctly by Auto Set Up function or if you have moved to a different area or if a new station starts bro...
Page 16 - Specifications
Specifications Specifications shown are for SP mode unless specified otherwise.E. & O.E. Design and specifications subject to change without notice. GENERAL Power requirement Rating : AC 110 V – 240 V d , 50 Hz/60 Hz Operating : AC 90 V – 260 V d , 50 Hz/60 Hz Power consumption : 14 W Temperatur...