Page 2 - Your GIGA 5
2 Table of contents Your GIGA 5 IMPORTANT SAFEGUARDS 4 Control elements 8 1 Preparing and using for the first time 10 JURA on the Internet ....................................................................................................................................10Setting up the machine .......
Page 3 - Symbol description; This symbol means that you are being prompted to
3 Table of contents 5 Maintenance 39 Rinsing the coffee system .........................................................................................................................40Rinsing the milk system .............................................................................................
Page 4 - IMPORTANT SAFEGUARDS; Pass them on to any subsequent user.
4 IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS SAVE THESE INSTRUCTIONS. Pass them on to any subsequent user. When using electrical appliances, basic safety precautions shall always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Z Read all ins...
Page 5 - This appliance has a 3-pin grounded plug.
5 IMPORTANT SAFEGUARDS The appliance is designed and intended for household use only. It shall only be used for coffee preparation and to heat milk and water, according to these instructions. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility ...
Page 6 - Do not immerse base in water or try to disassemble.
6 IMPORTANT SAFEGUARDS This appliance is for household use. Any servicing other than clea-ning and user maintenance shall be performed by an authorized service representative: Z Do not immerse base in water or try to disassemble. Z Do not put the appliance or any individual parts in the dish-washer....
Page 8 - Control elements; HOT
8 Control elements Control elements 5 6 1 23 4 8 7 10 15 14 13 9 11 12 J HOT J HOT 1 Bean container with aroma preservation cover 2 Bean container status indicator 3 Water tank cover 4 Water tank 5 Power switch and plug-in mains cord (back of the machine) 6 Coffee grounds container 7 Drip tray 8 Cup...
Page 9 - Top of the machine
9 Control elements Top of the machine 1 Q On/Off button 2 g Rotary Switch 3 O P button (programming) Front 4 Display 5 Multi-function buttons (button function depends on what is shown in the display) Back of the machine 1 Service cover (Open by pressing with your finger) 2 Locking device 3 Sliding c...
Page 10 - Preparing and using for the first time; short operating instruc-; JURA on the Internet; NOTICE; NOTICE
10 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the Internet. You can download short operating instruc- tions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your GIGA and on every as...
Page 11 - with
11 1 Preparing and using for the first time T Fill the bean container with coffee beans and close the aroma preservation cover. If the machine is operated with a defective power cord, there is a danger of potentially fatal electric shock. T Never use a machine which is damaged. T Never use a machine...
Page 12 - Quick installation
12 1 Preparing and using for the first time E To display more languages, press the ‘Next’ button (bottom right). T Press the button that corresponds to the language you want, e.g. ‘English’ . ‘Saved’ appears briefly on the display to confirm the setting. ‘First-time use’ E Now choose between ‘Quick ...
Page 14 - Deactivating the filter
14 1 Preparing and using for the first time T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Filter’ / ‘Filter rinsing complete.’ ‘Welcome to JURA’ , ‘Machine is heating.’ , ‘Press the Rotary Switch.’ . k T Press the Rotary Switch. ‘Machine is rinsing.’ , the m...
Page 15 - Level; Connecting milk
15 1 Preparing and using for the first time You can find out what the water hardness is by using the Aquadur® test strip supplied as standard. T Hold the test strip briefly (for 1 second) under flowing water. Shake off the water. T Wait for about 1 minute. T You will then be able to read the degree ...
Page 16 - Preparation; amounts
16 2 Preparation 2 Preparation Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T In the event of scalding, rinse affected area with cold water and seek medical atten...
Page 18 - daily
18 2 Preparation T Place a glass under the dual spout. T Press the ‘Latte macchiato’ button. ‘Latte macchiato’ and the various amounts are displayed. ‘Latte macchiato’ , the preset amounts of milk and milk foam flow into the glass.Coffee preparation starts. The preset amount of water for espresso fl...
Page 19 - Ground coffee
19 2 Preparation You can choose to use a second coffee variety, for example decaf-feinated coffee, with the filter funnel for ground coffee. E Never add more than two level measuring spoons of ground coffee. E Use ground coffee which is not ground too finely. Very fine coffee can block up the system...
Page 20 - ‘Please select product:’; Preparing barista recipes
20 2 Preparation Now you too can be a professional barista! You can select the recipes for 12 delicious coffee creations from the product selector using the Rotary Switch. The GIGA will guide you through each step of the preparation process with easy-to-follow text and pictures. Choose from: U Maroc...
Page 21 - permanently
21 2 Preparation It is easy to make permanent settings for the amounts (amount of water, amount of milk etc.) for all products according to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount of water will be dispensed. Th...
Page 22 - Preparation of a specialty
22 2 Preparation You have the option of configuring the start screen such that the grinder selection (‘beans à la carte’) is always displayed. Before each preparation, you can select which grinder is to be used and therefore which coffee beans are to be used. E If the grinder selection is activated,...
Page 23 - (within approximately; Hot water; CAUTION
23 2 Preparation The following temperatures can be selected for preparing hot water: ‘Low’ , ‘Normal’ , ‘High’ . There is a danger of scalding from hot water splashes. T Avoid direct contact with the skin. Precondition: ‘Please select product:’ is displayed. T Place a cup under the hot-water spout. ...
Page 24 - Daily; ‘Welcome to JURA’; Switching on
24 3 Daily operation 3 Daily operation When the GIGA is switched on, it automatically prompts you to per-form the rinse operation. Start the rinse operation by pressing the Rotary Switch k . In programming mode you can change this set- ting so that the machine starts the switch-on rinse automaticall...
Page 25 - Switching off
25 3 Daily operation When you switch off your GIGA, the dual spout is rinsed automati-cally. Precondition: ‘Please select product:’ is displayed. T Place a receptacle under the dual spout. Q T Press the On/Off button. ‘Machine is rinsing.’ , ‘Milk system is being rinsed.’ (if you have prepared a spe...
Page 26 - Permanent settings in programming mode; Program item
26 4 Permanent settings in programming mode 4 Permanent settings in programming mode Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T In the event of scalding, rins...
Page 27 - Product settings; WARNING
27 4 Permanent settings in programming mode Program item Sub-item Explanation ‘Machine settings (4/5)’ ‘Choose language’ , ‘Display’ , ‘Colour scheme’ , ‘Café à la carte’ , ‘Barista recipes’ T Select your language. T Change the display settings. T Activate the grinder selection. ‘Information (5/5)’ ...
Page 29 - right
29 4 Permanent settings in programming mode T Press the ‘+’ or ‘–’ button to change setting for the amount of milk to ‘6 sec.’ . T Press the ‘Save’ button. T Press the ‘Amount of milk foam’ button. T Press the ‘+’ or ‘–’ button to change setting for the amount of milk foam to ‘14 sec.’ . T Press the...
Page 30 - immediately; Maintenance settings
30 4 Permanent settings in programming mode In the program item ‘Machine settings (3/5)’ / ‘Maintenance settings’ you can make the following settings: U ‘Filter’ U Activate the CLEARYL Blue filter cartridge (see Chapter 5 ‘Maintenance – Inserting and activating the filter’). U ‘Water hardness’ U If ...
Page 32 - Time and date
32 4 Permanent settings in programming mode U ‘Save Level 2’ U Soon after the last preparation, the GIGA stops heating up. After about 5 minutes the message ‘Energy Save’ is dis- played. U Before you can prepare a specialty coffee, specialty coffee with milk, or hot water, the machine must heat up. ...
Page 33 - every day of the week.; Timer
33 4 Permanent settings in programming mode T Press the ‘+’ or ‘–’ button to set the hours. T Press the ‘Save’ button. T Press the ‘+’ or ‘–’ button to set the minutes. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Time / date’ O T Press the P button to exit programming mode. ‘...
Page 34 - Automatic switch-off
34 4 Permanent settings in programming mode T Press the ‘+’ or ‘–’ button to set the minutes (for ‘Switch machine off’ ). T Press the ‘Every weekday’ button. ‘Saved’ appears briefly on the display. The switch-on and switch-off times you just set are adopted for every day of the week. ‘Timer’ O T Pre...
Page 35 - all products; Restore factory settings
35 4 Permanent settings in programming mode Example: Proceed as follows to change the unit for the amount of water from ‘ml’ to ‘oz’ . Precondition: ‘Please select product:’ is displayed. O T Press the P button. ‘Maintenance status (1/5)’ g T Turn the Rotary Switch until the program item ‘Machine se...
Page 36 - Language
36 4 Permanent settings in programming mode T Press the ‘Yes’ button. ‘Saved’ appears briefly on the display. ‘Factory setting’ O T Press the P button to exit programming mode. ‘Please select product:’ In this program item you can set the language used by your GIGA. Example: Proceed as follows to ch...
Page 37 - Background
37 4 Permanent settings in programming mode T Press the ‘Brightness’ button. T Press the ‘+’ or ‘–’ button to change the setting. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Display’ O T Press the P button to exit programming mode. ‘Please select product:’ In this program ite...
Page 38 - Querying information
38 4 Permanent settings in programming mode T Press the ‘Inactive’ button. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Machine settings (4/5)’ O T Press the P button to exit programming mode. ‘Please select product:’ In the program item ‘Information (5/5)’ you can view the fo...
Page 39 - Maintenance
39 5 Maintenance 5 Maintenance Use of maintenance products that are harmful to health and dis-charge of liquids during maintenance program. Harmful if swal-lowed. Irritating to eyes and skin. T Keep children AWAY. T Keep children away from the machine while it is performing a maintenance program. T ...
Page 40 - Rinsing the coffee system
40 5 Maintenance You can perform coffee system rinsing at any time. Precondition: ‘Please select product:’ is displayed. T Place a receptacle under the dual spout. O T Press the P button. ‘Maintenance status (1/5)’ T Press the ‘Rinse the coffee system’ button. ‘Machine is rinsing.’ , water flows out...
Page 45 - Changing the filter
45 5 Maintenance T Remove the filter cartridge extension from the Welcome Pack. T Fit the filter extension on top of a CLEARYL Blue filter car- tridge. T Remove and empty the water tank. T Open the filter holder and insert the filter cartridge into the water tank, exerting slight pressure. T Close t...
Page 46 - ‘Filter is being rinsed.’; Cleaning the machine
46 5 Maintenance T Insert the filter cartridge into the water tank, exerting slight pressure. T Close the filter holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert the tank. k T Press the Rotary Switch. ‘Filter is being rinsed.’ , the filter is rinsed...
Page 48 - Descaling the machine
48 5 Maintenance The GIGA builds up deposits of limescale over time and automati-cally prompts you to descale it when necessary. The degree of calci-fication depends on the hardness of your water. Non-recommended descaling agents (e.g. vinegar) may contain substances that could damage the machine or...
Page 50 - ‘Descale’
50 5 Maintenance T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Descale’ / ‘Descaling complete.’ Descaling is now complete. Your GIGA is once more ready for use. E If the descaling operation stops unexpectedly, rinse the water tank thoroughly. Coffee beans ma...
Page 51 - Descaling the water tank
51 5 Maintenance Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time. T Remove the water tank. T If you use a CLEARYL Blue filter cartridge, remove this. T Descale the tank with a mild conventional descaling agent in acco...
Page 52 - Display; Message
52 6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank.’ The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time – Filling the water tank’). ‘Empty coffee grounds container.’ The coffee grou...
Page 54 - Troubleshooting; Problem
54 7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed, or milk sprays from the dual spout. The dual spout is dirty. T Rinse and clean the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). Coffee only comes out in ...
Page 56 - Transport and environmentally friendly disposal; Disposal
56 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal In order to protect the GIGA from frost during transport, the system must be emptied. Precondition: ‘Please select product:’ is displayed. T Place one receptacle under the dual spout and another un...
Page 57 - Technical; Directives
57 9 Technical data 9 Technical data Voltage 120 V ~, 60 Hz Power 1250 W Conformity mark Energy consumption ‘Save energy’ / ‘Save No’ Approx. 30 Wh Energy consumption ‘Save energy’ / ‘Save Level 1’ Approx. 12 Wh Energy consumption ‘Save energy’ / ‘Save Level 2’ Approx. 15 Wh Pump pressure Static, ma...
Page 61 - – intentionally blank –
Page 64 - 1 JURA contact details / Legal information; Customer Service
64 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AGKaffeeweltstrasse 10CH-4626 NiederbuchsitenSwitzerland USA: JURA CAPRESSO, Inc. Canada: FAEMA Customer Service PhoneE-Mail [email protected] 1-(855)-544-8600info@ju...