Jura 13549 - Manuals

5 Important Safeguards a. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a long cord. Your IMPRESSA has a 3-pin grounded plug. b. Longer extension cords are available and may be used if care is exercised in their use. c. If an extension...

6 Important Safeguards Keep your hands and the cord away from hot parts of the Z appliance during operation. Never clean with scouring powders or hard implements. Z Z Never fill instant coffee, chocolate mix etc. into the grinder or ground coffee funnel (grinder by-pass). It will damage the function...

8 Control elements Control elements 1 Bean container cover 2 Water tank cover 3 Water tank 4 Power switch and mains cable (side view) 5 Height-adjustable cappuccino frother 6 Coffee grounds container 7 Drip tray 8 Grinder adjustment switch 9 Bean container with aroma preservation cover 10 Filler fun...

10 Important information Important information The machine is designed and intended for private domestic use. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Ele- ktroapparate AG cannot accept any responsibility for th...

13 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the internet. You can download @ short operating instructions for your machine from the JURA website www.jura.com. You will also find interesting and up-to-date information on your IMPRESSA and on every ...

14 1 Preparing and using for the first time T Open the bean container cover and remove the aroma pres- ervation cover. T Remove any dirt or foreign objects from inside the bean container. T Fill the bean container with coffee beans, then close the aroma preservation cover and the bean container cove...

15 1 Preparing and using for the first time Your IMPRESSA no longer has to be descaled if you are using the CLARIS Blue filter cartridge. Perform the ‘inserting the filter’ operation without any inter- E ruptions. This will ensure that your IMPRESSA always produces its best. Precondition: COFFEE REA...

16 1 Preparing and using for the first time You can interrupt rinsing of the filter at any time by pressing E any button. Press the Maintenance button c to continue rins- ing of the filter. The water may be slightly discoloured. This is not harmful to E health and does not affect the taste. Rinsing ...

17 1 Preparing and using for the first time g T Turn the Rotary Switch until HARDNESS 25°dH is dis- played. k T Press the Rotary Switch to confirm the setting. CONFIRMED appears briefly on the display. HARDNESS g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit p...

18 2 Preparation 2 Preparation You can stop preparation of a speciality coffee, milk speciality E or hot water at any time. Just press any button. Before and during the grinding operation you can select the E coffee strength of individual products: extra-mild ( ö ), mild ( öö ), normal ( ööö ), stro...

20 2 Preparation Example: Proceed as follows to prepare milk foam. T Attach the milk pipe to the cappuccino frother. Use the long pipe for a milk carton/bottle and the short pipe for the milk container. T Insert the other end of the milk pipe into a milk carton/bot- tle or connect it to the milk con...

21 2 Preparation Example: Proceed as follows to prepare an espresso using pre- ground coffee. T Place an espresso cup under the coffee spout. T Open the cover of the bean container. T Open the cover of the filler funnel for preground coffee. PRE-GROUND / FILL POWDER T Place one level measuring spoon...

22 2 Preparation Preparation stops. CONFIRMED and ENJOY appear briefly on the display. The set amount of water for one cof- fee will be permanently stored. COFFEE READY appears on the display. You can alter this setting at any time by repeating the above E procedure. You can also permanently set the...

23 3 Daily operation 3 Daily operation When the IMPRESSA is switched on, it automatically prompts you to perform the rinse operation. Start the rinse operation by pressing the Maintenance button c . In programming mode you can change this setting so that the machine starts the switch-on rinse automa...

24 3 Daily operation When you switch your IMPRESSA off, the spouts used to prepare a speciality coffee are rinsed. T Place a receptacle under the coffee spout and another under the cappuccino frother. Q T Press the On/Off button. GOODBYE , the spouts used to prepare a speciality coffee or milk are r...

25 4 Permanent settings in programming mode 4 Permanent settings in programming mode You can make permanent settings in programming mode. You can navigate through the programme items and permanently save the required settings simply by turning and pressing the Rotary Switch. You can make the followi...

26 4 Permanent settings in programming mode Programme item Sub-item Explanation LOGO LOGO T Select the logo to be displayed when the graphic display is not being used to display any other informa- tion. RESET PRODUCT , ALL PROD. , RESET ALL , EMPTY SYSTEM T Reset the permanently set values of all pr...

29 4 Permanent settings in programming mode Example: Proceed as follows to change the energy-saving mode from ENERGY SAVE NO to ENERGY SAVE LEVEL1 . Precondition: COFFEE READY is displayed. k T Press and hold the Rotary Switch until MAINTENANCE appears. g T Turn the Rotary Switch until ENERGY is dis...

30 4 Permanent settings in programming mode g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. COFFEE READY In the programme item RINSES you can make the following set- tings: START RINSE U MANUAL The switch-on rinse must be started manually. U ...

31 4 Permanent settings in programming mode g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. COFFEE READY You can change all product names, the welcome text and the clos- ing text. Example: Proceed as follows to change the product name from 1 ...

32 4 Permanent settings in programming mode g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. COFFEE READY You can choose which logo is displayed when the display is not being used to display any other information. The available logos include: ...

34 4 Permanent settings in programming mode The maintenance status can also be displayed in addition to E the number of performed maintenance programmes. The bar shows the current maintenance status. When the bar is com- pletely filled, your IMPRESSA will request the respective main- tenance program...

36 5 Maintenance 5 Maintenance Your IMPRESSA has the following integrated maintenance pro- grammes: Cleaning the cappuccino frother U Rinsing the cappuccino frother U Changing the filter U Cleaning the machine U Rinsing the machine U Descaling the machine U Clean or descale the machine or change the...

37 5 Maintenance After each milk preparation, the IMPRESSA prompts you to run a cappuccino rinse. Precondition: COFFEE READY / CAPPU RINSE is displayed and the Maintenance button c lights up. T Place a receptacle under the cappuccino frother. c T Press the Maintenance button. CAPPUCCINO RINSING , th...

38 5 Maintenance T Place another receptacle under the cappuccino frother. c T Press the Maintenance button. CAPPUCCINO CLEANING , the cappuccino frother and the pipe are cleaned. WATER FOR CAPPUCCINO / PRESS BUTTON T Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the...

39 5 Maintenance If you do not want to start changing the filter just yet, turn the E Rotary Switch until CHANGE / START NO is displayed. Press the Rotary Switch to exit the maintenance programme. The prompt to change the filter remains active. c T Press the Maintenance button. CHANGE FILTER / PRESS...

41 5 Maintenance The IMPRESSA builds up deposits of limescale over time and auto- matically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water. If the descaling agent comes into contact with the skin or eyes, this can cause irritation. T Avoid...

43 5 Maintenance UNIT IS HEATING , RINSING , water flows out of the coffee spout. The operation stops automatically, TRAY / GROUNDS EMPTY . T Empty the drip tray and coffee grounds container and put them back into the machine. Descaling is now complete. The IMPRESSA heats up and is once more ready f...

44 6 Display messages 6 Display messages Message Cause/Result Action WATER TANK FILL The water tank is empty. You cannot prepare any products. T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time – Filling the water tank’). GROUNDS EMPTY The coffee grounds container is full. ...

46 7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed or milk sprays from the cappuc- cino frother. The cappuccino frother is dirty. T Rinse and clean the cappuc- cino frother (see Chapter 5 ‘Maintenance – Rinsing the cappuccino fro...

48 8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal In order to protect the IMPRESSA from frost during transport, the system must be emptied. Precondition: COFFEE READY is displayed. k T Press and hold the Rotary Switch until MAINTENANCE appears. g ...

49 9 Technical data 9 Technical data Voltage A S F D G 220–240 V ~, 50 Hz 120 V ~, 60 Hz 220–240 V ~, 50 Hz 220 V ~, 50 Hz Power 1350 W Safety test S F D G Energy consumption SAVE NO Approx. 23 Wh Energy consumption SAVE LEVEL1 Approx. 16 Wh Energy consumption SAVE LEVEL2 Approx. 6 Wh Pump pressure ...

52 11 JURA contact details / Legal information 11 JURA contact details / Legal information JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 62 38 98 233 You will find additional contact details for your country at @ www.jura.com. The machine complies with the following d...