Juniper Networks M40 - Manuals

Juniper Networks M40 – Manual in PDF format online.

Manuals:

Manual

Manual Juniper Networks M40

Summary

Page 2 - FPC Description; M20 FPC Description on page 3

FPC Description •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 2 FPC Description The FPCs on a router house the Physical Interface Cards (PICs), which connect the router to network media. The I/O Manager ASIC or ASICs on the FPC accepts incoming data packets...

Page 3 - M20 FPC Description; through

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 3 FPC Description M20 FPC Description In an M20 router, up to four FPCs install horizontally into the midplane from the front of the chassis, below the System and Switch Board (SSB). Each FPC is referenced by th...

Page 4 - M40 FPC Description

FPC Description •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 4 M40 FPC Description In an M40 router, up to eight FPCs install vertically into the backplane from the front of the chassis, four on either side of the System Control Board (SCB). Each FPC is re...

Page 5 - M40e FPCs Description

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 5 FPC Description M40e FPCs Description In an M40e router, up to eight FPCs install vertically into the midplane from the front of the chassis. Each FPC is referenced by the number of the slot in which it is ins...

Page 6 - Figure 4: M40e Router with an M40e-FPC1 Installed in Slot FPC0

FPC Description •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 6 Any combination of the three types of FPC can be installed in the M40e router. Figure 4 shows an M40e router with an M40e-FPC1 (housing four PICs) installed in slot FPC0 . Figure 4: M40e Router...

Page 7 - M160 FPCs Description

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 7 FPC Description M160 FPCs Description In an M160 router, up to eight FPCs install vertically into the midplane from the front of the chassis. Each FPC is referenced by the number of the slot in which it is ins...

Page 8 - Tools and Parts Required; Figure 6: M160 Router with an FPC1 Installed in Slot FPC0; Tools and Par ts Required; To replace an FPC or a PIC, you need the following tools and parts:

Tools and Parts Required •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 8 Figure 6 shows an M160 router with an FPC1 (housing four PICs) installed in slot FPC0 . Figure 6: M160 Router with an FPC1 Installed in Slot FPC0 Tools and Par ts Required To replace a...

Page 9 - Replace an FPC in an M20 Router; OK

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 9 Replace an FPC in an M20 Router Replace an FPC in an M20 Router On an M20 router, the FPCs are hot-insertable and hot-removable, so you can remove and replace them without powering down the router. When you re...

Page 10 - Router Hardware Guide; Install an FPC in an M20 Router; To install an FPC in an M20 router, follow this procedure:

Replace an FPC in an M20 Router •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 10 8. Grasp the FPC with both hands and slide it about halfway out of the chassis. See Figure 7. 9. Place one hand underneath the FPC to support it, and slide it completely out of...

Page 12 - Figure 8: Install an FPC in an M20 Router; Replace an FPC in an M40 Router; For instructions, see the following sections:; Remove an FPC from an M40 Router; To remove an FPC from an M40 router, follow this procedure:

Replace an FPC in an M40 Router •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 12 Figure 8: Install an FPC in an M20 Router Replace an FPC in an M40 Router On an M40 router, the FPCs are hot-insertable and hot-removable, so you can remove and replace them wi...

Page 14 - Figure 9: Remove an FPC from an M40 Router; Install an FPC in an M40 Router; To install an FPC in an M40 router, follow this procedure:

Replace an FPC in an M40 Router •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 14 Figure 9: Remove an FPC from an M40 Router Install an FPC in an M40 Router To install an FPC in an M40 router, follow this procedure: 1. Attach an ESD strap to your bare wrist ...

Page 16 - Replace an FPC in an M40e or M160 Router; Remove an FPC from an M40e or M160 Router; FAIL

Replace an FPC in an M40e or M160 Router •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 16 Replace an FPC in an M40e or M160 Router On an M40e or M160 router, the FPCs are hot-insertable and hot-removable, so you can remove and replace them without powering ...

Page 18 - Figure 11: Remove an FPC from an M40e or M160 Router; Install an FPC in an M40e or M160 Router; Offline button

Replace an FPC in an M40e or M160 Router •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 18 Figure 11: Remove an FPC from an M40e or M160 Router Install an FPC in an M40e or M160 Router To install an FPC in an M40e or M160 router, follow this procedure (see F...

Page 20 - Figure 12: Install an FPC in an M40e or M160 Router; For more information, see the; Replace a PIC in an M40e-FPC; Remove a PIC from an M40e-FPC on page 21

Replace a PIC in an M40e-FPC •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 20 Figure 12: Install an FPC in an M40e or M160 Router You can also use the following CLI command to confirm correct FPC and PIC functioning: user@host> show chassis fpc For more ...

Page 21 - Remove a PIC from an M40e-FPC

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 21 Replace a PIC in an M40e-FPC Remove a PIC from an M40e-FPC To remove a PIC from an M40e-FPC, follow this procedure: 1. Place an electrostatic bag or antistatic mat on a flat, stable surface to receive the PIC...

Page 22 - PIC Software Configuration; command from the CLI before contacting support:; For documentation issues, contact Juniper Networks at

PIC Software Configuration •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• FPC Installation Instructions 22 3. Push the PIC part way into the M40e-FPC slot. Carefully align the tabs on the PIC connector with the notches in the connector at the rear of the M40e-FPC slot, and push the PIC i...

Juniper Networks Manuals

Juniper Networks IDP8200 Manual
Juniper Networks SRX 210 Manual
Juniper Networks 5000 SERIES Manual
Juniper Networks 44050456001 Manual
Juniper Networks IDP 800 Manual
Juniper Networks C2000 Manual
Juniper Networks IDP250 Manual
Juniper Networks VE170 Manual
Juniper Networks 8 Manual
Juniper Networks fi-6000NS Manual
Juniper Networks T1600 Manual
Juniper Networks 5000 Manual
Juniper Networks IDP75 Manual
Juniper Networks SSG 20 Manual
Juniper Networks C4000 Manual
Juniper Networks G10 CMTS Manual
Juniper Networks E-Series Manual
Juniper Networks 5XT Manual
Juniper Networks MX960 Manual
Juniper Networks 215 Manual