Jasco RM94903 - Manuals

Jasco RM94903 – Manual in PDF format online.

Manuals:

Manual

Manual Jasco RM94903

Summary

Page 2 - Table of Contents

1 Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Setting Up Your Universal Remote . . . . . . . . . . . . . . . .3Programming Your Universal Remote For: TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5VCR or DVD . . . . . . . . . . . . ....

Page 3 - Button Description

2 Button Description Indicator Light Flashes to show that theremote is working. POWER Operates the same as onyour original remote. MUTE Operates the same as onyour original remote. Device Buttons (TV, VCR/DVD,CBL/AUX) The TV , VCR/DVD and CBL/AUX buttons are used to select thehome entertainment devi...

Page 4 - Setting Up Your Universal Remote; Place batteries in the remote; Determine if your remote needs programming

3 Setting Up Your Universal Remote Place batteries in the remote 1. Remove the battery compart-ment cover. 2. Place two AAA batteries asshown, matching the + and –end of each battery as indi-cated in the battery compart-ment. 3. Replace the cover. (Some RCA, GE and ProScan devices may already be pre...

Page 5 - Programming TV Using Code Lists

4 1. Manually turn on the TV. 2. Find the code for your brand in the list startingbelow. 3. Press and hold the TV but- ton for five (5) seconds, the Indicator Light will light up. 4. Release the TV button. The following buttonsstand for each digit of thecode: 5. Enter the first digit in the code wit...

Page 6 - TV CODE

5 3 RD CODE NUMBER X TV CODE 7. Enter the third digit in the code with the FOR button the same way as in step 5.If the number is 0, do notpress FOR and proceed to next step. 8. Press STOP after code is entered and the Indicator Light will turn off. 9. With your TV on, press CHANNEL Up. If the TV res...

Page 8 - CHANNEL; Programming Cable Box Using Code Lists

1. Manually turn on the CableBox. 2. Find the code for your brand in the list starting on thenext page. 3. Press and hold the CBL/AUX button for five (5) seconds,the Indicator Light will light up. 4. Release the CBL/AUX button. The following buttons standfor each digit of the code: 5. Enter the firs...

Page 9 - DEVICE BOX CODE

8 Note: The Indicator Light will blink after each number isentered. 6. Enter the second digit in the code with the PLAY button the same way as in step 5. If the number is 0, do notpress PLAY and proceed to next step. 7. Enter the third digit in the code with the FOR button the same way as in step 5....

Page 10 - Operating A TV

Turning the TV On and Off. 1. Press TV to set the remote to control the TV (mostRCA, GE and ProScanmodels will only turn onwhen pressing TV notpower). 2. Press POWER to turn the TV on or off. Change Channels and Volume onthe TV. Press VOLUME UP or VOLUME DOWN to change volume on the TV.Press CHANNEL...

Page 11 - Turning the VCR On or Off.; Operating A VCR

10 Turning the DVD Player Onand Off. 1. Point the remote at theDVD player and press VCR/DVD . 2. Press POWER to turn the DVD player on or off. 3. Press CHANNEL UP or CHAN- NEL DOWN for DVD SKIP functions. 4. Use REV and FOR for DVD reverse and forward func-tions. Operating A DVD Player Operating A V...

Page 12 - Program a device button using Code Search.

11 Operating A VCR Operating A VCR (con’t) 4. Press STOP when you are finished. 5. Press REW to rewind the tape. 6. Press PAUSE to pause the tape. 7. Press RECORD twice to begin recording. 1 . Manually turn on your TV, VCR or Cable Box. 2. Press the Device button (TV, VCR/DVD, or CBL/AUX) for five (...

Page 13 - Code Retrieval

1. Press the Device button (TV, VCR/DVD or CBL/AUX) for five (5) seconds. The Indicator Light will go on. Then release the device button. 2. Then press the Device button (TV, VCR/DVD or CBL/AUX) again. The Indicator Light will go off. Release the devicebutton. 3. For the first digit in the code,pres...

Page 14 - Operating A TV/VCR Combo Unit; 0 Day Limited Warranty

13 Operating A TV/VCR Combo Unit GE, RCA and ProScan Brand Devices: Many of these devices (TVs and VCRs) do notneed to be programmed. In the event that programming is required, the code search method is suggested. Note: With these brands, the device button (TV, VCR) will usually turn the units on. T...

Page 15 - Additional Electronic Products

14 Additional Electronic Products For additional electronic products, check out our website at www.ge-electronics.com. Lost Your Codes? Enclosed with this remote is a sticker onwhich you should write the codes for eachdevice you programmed. Apply the stickerto the back of the remote or somewhereconv...

Page 16 - MUT

15 Indice Descripción del botón . . . . . . . . . . . .15-16 Arreglo su telecontrol universal . . . .16-17 Programando su TV telecontrol universalpara: TV . . . . . . . . . . . . . . . . . . . . . . . .17-19 VCR/DVD . . . . . . . . . . . . . . . . .19-21 El rectángulo del cable/AUX . . . .21-23 Func...

Page 24 - Operación de una TV

23 mación no adicional. 10. Introducza su códigoaquí para la referencia fácil. Dando vuelta a la TV porintervalos. 1. Presione la TV para fijarel telecontrol para controlarla TV (la mayoría de losmodelos de RCA, de la GEy de ProScan se giraránsolamente cuando presionael botón TV no POWER. 2. Presion...

Page 25 - Operación de un VCR

Dando vuelta a el rectángu-lo del cable por intervalos. 1. Señale el telecontrol en elrectángulo del cable y pre-sione CBL/AUX. 2. Presione POWER paradarle vuelta encendido oapagado. Cambia canales en el rec-tángulo del cable Presione CHANNEL UP oCHANNEL DOWN paracambiar canales en el rec-tángulo de...

Page 26 - Usar una cinta en su VCR.

25 Usar una cinta en su VCR. 1. Gire el VCR. 2. Inserte una cinta en elVCR. 3. Presione PLAY paraencender la cinta. 4. Presione STOP cuando leacaban. 5. Presione REV pararebobinar la cinta. 6. Presione PAUSE paradetenerse brevemente lacinta. 7. Presione RECORD dosveces para comenzar a reg-istrar. Si...

Page 27 - Presione el botón STOP

26 1. Gire manualmente su TV,VCR/DVD o rectángulodel CBL/AUX. 2. Presione el botón del dis-positivo (TV, VCR/DVD oCBL/AUX) por cinco (5)segundos. La luz de indi-cador continuará. Entoncesversión el botón del dispos-itivo. 3. Presione y versiónPOWER hasta que el dis-positivo da vuelta apagado(usted p...

Page 28 - La Extracción del código; OFF

Si usted necesita encontrarel código de tres cifrasdespués de que usted hayainstalado su telecontrol,utilice este procedimiento. 1. Presione el botón del dis-positivo (TV, VCR/DVD oCBL/AUX) por cinco (5)segundos. La luz de indi-cador continuará. Entoncesversión el botón del dispos-itivo. 2. Entonces...

Page 29 - Con estas marcas de fábrica, el botón

28 5. Para el tercer dígito en elcódigo, presione el botóndel FOR y cuente el númerode parpadeos. Nota: si no hay parpadeos,el número es cero. 6. Introduzca sus códigosaquí para lareferencia. Funcionando una unidadcombo de TV/VCR Algúnes unidades del la TV/VCR combi-nación pueden ser controladas usa...

Page 30 - Garantía Limitada De 90 Días

29 Alerta Baja De la Batería: Cuando sus baterías son débiles, la luz deindicador centelleo indicándola es hora decambiar las baterías. Garantía Limitada De 90 Días La compañía de Jasco Products autorizaeste producto para estar libre de los defec-tos de producción por un período denoventa días a par...

Page 32 - CODE LIST

31 CODE LIST 94903 Revised Size 1/21/02 1/15/04 8:44 AM Page 32