Jasco HO98751 - Manual - manualsarea.com

Page 2 - Table of Contents

Table of Contents I. INTRODUCTION 3 II. OVERVIEW 4 III. SAFETY INSTRUCTIONS 5 IV. POWER MODE SETTING 6 V. HARDWARE INSTALLATION 8 VI. TETRAHUB™ ACCESSORIES 9 VII. SOFTWARE INSTALLATION (WINDOWS 98) 10 VIII. TROUBLESHOOTING 11 IX. TECHNICAL SPECIFICATIONS 12 X. FCC COMPLIANCE STATEMENT 13 XI. LIMITED...

Page 3 - THIS PACKAGE INCLUDES:

I. Introduction Congratulations on the purchase of your 4-port USB 2.0 TetraHub™! The TetraHub™ will allow you to receive the maximum possible bandwidth for all of your USB 2.0 and 1.1 devices! Please read this entire manual carefully before using your TetraHub™. Follow the instructions to prevent d...

Page 4 - FEATURES

II. Overview TetraHub™ technology gives you the best of USB 1.1 and 2.0 in one Hi-Speed USB 2.0 Hub. Connect USB 2.0 devices for data transfer rates of up to 480 Mbps. At the same time connect USB 1.1 devices for a guaranteed 12 Mbps of bandwidth per device. Use any combination of USB 1.1 and 2.0 de...

Page 5 - Instructions

III. Safety Instructions Always read the Safety Instructions carefully. ¾ Keep this instruction manual for future reference. ¾ Keep this equipment away from humidity. ¾ Do not expose to moisture. ¾ Replace if damaged. ¾ Replace if you see obvious signs of breakage. ¾ If you cannot get it to work acc...

Page 6 - There are two power mode options for the USB 2.0 4-Port TetraHubTM.

IV. Power Mode Setting There are two power mode options for the USB 2.0 4-Port TetraHub™. The first is bus-power mode, which does NOT require the use of an AC power adapter. In this mode, the hub is provided with 500 milliamps for all 4 ports. This should be adequate for mice, keyboards, and other l...

Page 8 - Installation; support USB. These can be found on Microsoft’s website.

V. Hardware Installation 1. Make sure your computer has all the necessary updates required to support USB. These can be found on Microsoft’s website. 2. Plug the USB connector of the Tetrahub™ into the USB port of your computer or hub. The power LED should illuminate. 3. Windows® 98 or 98 SE users s...

Page 9 - Connect your USB devices to any of the 4 available downstream; Accessories; Free* High Speed USB Extension cable

4. Connect your USB devices to any of the 4 available downstream Ports. Note : If you connect the hub to a USB 1.1 Port, your computer may warn you that a high-speed device has been connected to a non-high speed port. Your hub will function properly, however it will function at the USB 1.1 speed of ...

Page 11 - VIII. Troubleshooting; Hub Not Seen

VIII. Troubleshooting • Hub Not Seen Make sure you have installed all Windows ® updates and patches pertaining to USB. These are available on Microsoft’s® website. Make sure all cables are properly connected. • Hub Not Working After Reboot Unplug the uplink cable (and the AC adapter cable if it is c...

Page 12 - IX. Technical Specifications

IX. Technical Specifications USB Hub: 4 Ports Standards: USB 1.1 and 2.0 Compatible Operating Systems: Windows® 98 SE, ME, 2000, XP Mac OS X and above Data Speed: High: 480 Mbps Full: 12 Mbps Low: 1.5 Mbps Upstream Ports: Series A plug x 1 Downstream Ports: Series A receptacle port x 4 LEDs: 1 Power...

Page 13 - FCC Compliance Statement; Reorient or relocate the receiving antenna.

X. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen...

Page 14 - XI. Limited Lifetime Warranty; St

XI. Limited Lifetime Warranty Jasco Products Co., Inc. warrants this product to be free from manufacturing defects regardless of how long you own it. This warranty is limited to the replacement of this product only and does not extend to consequential or incidental damage to other products that may ...

Jasco HO98751 - Manual

Table of Contents:

Summary

Other Jasco Models