Jasco HO97916 - Manuals - manualsarea.com

Page 2 - Table of Contents

Table of Contents I. INTRODUCTION 3 II. OVERVIEW 4 III. SAFETY INSTRUCTIONS 5 IV. POWER MODE SETTING 6 V. SOFTWARE INSTALLATION VI. HUB STAND ASSEMBLY 7 VII. HARDWARE INSTALLATION 13 VIII. TROUBLESHOOTING 16 IX. TECHNICAL SPECIFICATIONS 17 X. FCC COMPLIANCE STATEMENT 18 XI. WARRANTY 19 15

Page 3 - THIS PACKAGE INCLUDES:

I. Introduction Please read this entire manual carefully before using your new USB 2.0 7-Port Hub and follow the instructions to prevent damage to the USB 2.0 7-Port Hub and/or the connecting devices. THIS PACKAGE INCLUDES: • USB 2.0 7-Port Hub • USB 2.0 Device Cable (6 feet) • AC/DC Power Adapter •...

Page 4 - FEATURES

II. Overview This USB 2.0 7-Port Hub allows you to connect up to seven USB devices to a single USB port on your computer, including up to five high-powered devices, simultaneously. This device complies with USB 2.0 specifications and supports data speeds up to 480 Mbps. It is compatible with all USB...

Page 5 - Instructions

III. Safety Instructions Always read the Safety Instructions carefully. Keep this user’s manual for future reference. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. If any of the following situations arises, get the equipment checked by a ...

Page 7 - Stand may be mounted Magnetically or with Screws

V. Hub Stand Assembly Options: • Stand may be mounted Magnetically or with Screws • Hub may be oriented vertically or horizontally • Hubs may be stacked Contents: the hub to your desk. If you choose this mounting method, you will need to purchase the two screws separately. Stand Magnets ¼” Screws 7 ...

Page 9 - Attach Hub Stand with Screws; You will need to purchase two screws separately. These are not

B. Attach Hub Stand with Screws 1. You will need to purchase two screws separately. These are not provided. 2. Place the stand where you would like it secured to your desk. 3. Fasten the screws in the screw holes on both sides of the stand. 4. Attach the hub as described in Sections C & D. Note:...

Page 10 - Attach Hub to Stand Vertically; Line up the tracks of either side of the hub with the rails on the

C. Attach Hub to Stand Vertically 1. Line up the tracks of either side of the hub with the rails on the stand. 2. Slide the hub all the way back on the stand until you hear a click. Rails Hub Clips Push Hub 10

Page 11 - Attach Hub to Stand Horizontally; Line up the hooks on the bottom of the hub with the hub clips on

D. Attach Hub to Stand Horizontally 1. Line up the hooks on the bottom of the hub with the hub clips on the stand. 2. Slide the hub onto the stand until you hear a click. Hub Clips Push Hub 11

Page 12 - Hubs; Face the Hubs in the same direction

E. Stacking Hubs 1. Face the Hubs in the same direction 2. Line up the hooks on the bottom of Hub A with the top cover of Hub B. 3. Slide Hub A onto Hub B as shown in the diagram. Hub A Hub B 12

Page 13 - Installation; Position the Hub as desired using the directions in Section VI.

VI. Hardware Installation 1. Make sure your computer has all the necessary updates required to support USB 2.0. These can be found on Microsoft’s website. 2. Position the Hub as desired using the directions in Section VI. 13

Page 15 - Next

VII. Software Installation Software installation is only required for Windows  98 and 98 SE users. Users of all other Operating Systems, including Windows  NT, ME, 2000, XP and Mac  , may skip this section. 1) When your hub is connected to your computer, Windows  98 and 98 SE will detect the hub...

Page 16 - VIII. Troubleshooting; Hub Not Seen

VIII. Troubleshooting • Hub Not Seen Make sure you have installed all Windows  updates and patches pertaining to USB. These are available on Microsoft’s website. • Hub Not Seen on a laptop USB 2.0 Hubs may not work on all laptops. Try the hub on a desktop computer to confirm functionality of the hu...

Page 17 - IX. Technical Specifications

IX. Technical Specifications USB Hub: 7 Ports Standards: USB 1.1 and 2.0 Compatible Operating Systems: Windows 98 SE, ME, 2000, XP or later Mac OS 9.X and above Data Speed: High: 480 Mbps Full: 12 Mbps Low: 1.5 Mbps Upstream Ports: Series A plug x 1 Downstream Ports: Series A receptacle port x 7 LED...

Page 18 - FCC Compliance Statement

X. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen...